journal article·2023-05

Investigation on the stability of raft structure in single crystal superalloy

L. Pang, Z.X. Zhang, L.W. Kong, Z.B. Xing, Y. Shu, P. Li, G. Eggeler

Publisher page

Abstract

The thermal stability of CMSX-4 nickel-based single crystal superalloy with the raft structure is investigated by analyzing and comparing the macro-oxidation and in-situ oxidation experiments. After the macroscopic oxidation, it could be found that two kinds of oxidation morphologies appeared on the superalloy surface: region A (dendrite core) and region B (interdendrite). In regions A, the oxidation layer is relatively thick and composed of two oxide layers with the respective main components NiO and Co 2O 3. The interdendritic region B clustered Mo, Cr, Ti, Ta, Al and other elements has only one very thin oxide layer, the main components are Al 2O 3, Cr-O and TiO. The oxide layer is relatively dense and can isolate air and prevent further oxidation of the alloy. The further in-situ oxidation experiments of CMSX-4 superalloy showed that the thickness change is due to the migration of elements during the oxidation process, among which Ni element migrates from γ` phase to γ phase, Ta, Ti, Re, Hf, W, Co and Cr migrate from γ phase to γ` phase and the remaining Mo and Al elements did not show obvious migration characteristics. Due to the migration and oxidation of elements, the γ phase becomes thicker and the γ` phase is relatively thinner, thus the stress concentration easily occurs between the two phases, resulting in small voids aggregation, the cracks initiation and the final failure fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. C. Meid, A. Kostka, M. Bartsch, Fatigue Testing of Ni-based Superalloys for Gas Turbine Blades, 2016.
2. Development of cutting tools for ni-based superalloys turning10.2493/jjspe.84.123 ↗
3. High temperature fatigue testing of gas turbine blades10.1016/j.prostr.2017.11.079 ↗
4. Characterization of oxidation mechanisms in a family of polycrystalline chromia-forming nickel-base superalloys10.1016/j.actamat.2021.116626 ↗
5. Creep deformation mechanism mapping in nickel base disk superalloys10.1080/09603409.2016.1180858 ↗
6. A quantitative metallographic assessment of the evolution of porosity during processing and creep in single crystal Ni-base super alloys10.1002/mawe.201500379 ↗
7. Oxidation ahead of a crack tip in an advanced Ni-based superalloy10.1016/j.actamat.2012.12.017 ↗
8. Microstructure evolution of Nickel-based superalloy GH202 after high temperature oxidation from 800 °C to 1100 °C
9. High temperature oxidation of the haynes 282 nickel-based superalloy10.1007/s11085-014-9483-6 ↗
10. Oxidation resistance of nickel-based superalloy Inconel 600 in air10.1007/s12598-018-1148-1 ↗
11. Oxidation behavior of a single-crystal Ni-base superalloy between 900 and 1000 degrees C in air10.1016/j.jallcom.2009.10.261 ↗
12. On the mechanism of oxidation-fatigue damage at intermediate temperatures in a single crystal Ni-based superalloy10.1016/j.msea.2018.10.095 ↗
13. On the oxidation of the third-generation single-crystal superalloy CMSX-10, Metallurgical and Materials Transactions
14. Oxidation of the single-crystal Ni-base superalloy DD32 containing rhenium in air at 900 and 1000 °C10.1016/j.surfcoat.2004.06.003 ↗
15. High temperature oxidation behaviour of single crystal superalloys RR3000 and CMSX-410.1179/174327807X159925 ↗
16. Isothermal oxidation behavior of single crystal superalloy DD610.1016/S1003-6326(11)61210-7 ↗
17. Effect of rhenium addition on isothermal oxidation behavior of single-crystal Ni-based superalloy10.1016/j.surfcoat.2005.10.037 ↗
18. A. Akhtar, S. Hegde, R.C. Reed, The oxidation of single-crystal nickel-based superalloys, JOM: the journal of the Minerals, Metals & Materials Society 58(1) 37–42.10.1007/s11837-006-0066-0 ↗
19. Microstructure-dependent oxidation behavior of Ni-Al single-crystal alloys10.1016/j.jmst.2020.04.006 ↗
20. A study on the multiple stages of oxidation kinetics in a single crystal nickel-based superalloy10.1016/j.corsci.2021.109512 ↗
21. Oxidation behavior of (W, Re)-bearing single crystal Nickel-base superalloys10.1007/s12540-020-00616-w ↗
22. Comparative study of the reactive elements effects on oxidation behavior of a Ni-based superalloy10.1016/j.vacuum.2021.110382 ↗
23. Microstructural evolution during exposure in air and oxidation behavior of a nickel-based superalloy10.1016/j.vacuum.2020.109801 ↗
24. Effect of Ti addition on high-temperature oxidation behavior of Co–Ni-based superalloy10.1007/s42243-020-00379-z ↗
25. Oxidation studies on nickel-base superalloy 617 OCC10.1016/j.matpr.2019.12.194 ↗
26. Effects of Cr, W, and Mo on the high temperature oxidation of Ni-based superalloys10.3390/ma12182934 ↗
27. Coarsening behavior of γ′ precipitates in the γ'+γ area of a Ni3Al-based alloy10.1016/j.jallcom.2018.08.265 ↗
28. Advanced scale bridging microstructure analysis of single crystal Ni-Base superalloys10.1002/adem.201400136 ↗
29. Influence of stress state on the kinetics of gamma-channel widening during high temperature and low stress creep of the single crystal superalloy CMSX-410.1016/S0921-5093(01)00950-9 ↗
30. High temperature test rig for inert atmosphere miniature specimen creep testing10.1002/mawe.201100682 ↗
31. Microstructural characterization and phase separation sequences during solidification of Ni3Al-based superalloy10.1007/s40195-017-0634-z ↗
32. Directional solidification of Ni base superalloy IN738LC to improve creep properties10.1179/026708300101508117 ↗
33. Effect of solidification parameters on the microstructures and properties of CMSX-1010.1016/j.msea.2007.07.030 ↗