Effect of rotating magnetic field on NiAl(Si) phase evolution and mechanical properties of special nickel brass
Source abstract
Abstract
The rotating magnetic field (RMF) has been proven as one of effective method and widely used for solidification controlling of metallics materials. In this present study, a rotating magnetic field was applied during the solidification of special nickel brass, and corresponding effect on solidification microstructure and mechanical properties were investigated and revealed. Results demonstrated that the application of RMF greatly affects the lattice parameters of the synthesized NiAl(Si) phase. It also can be determined that the applied RMF can effectively eliminate the aggregation of the NiAl(Si) phase at grain boundaries, which is favorable and beneficial for homogenous distribution of NiAl(Si) phase. Additionally, the applied RMF also refines the brass matrix and induces the morphology evolution of the NiAl(Si) phase changing from bulk to spherical morphology. Accordingly, the enhanced mechanical properties with 627 MPa in ultimate tensile strength (UTS), 518 MPa in yield strength (YS) and 3.6% in elongation (EL) can be obtained under the RMF with optimal current intensity of 30 A, corresponding to the improvement of about 6.1%, 5.0% and 33.3% over the respective properties of the special nickel brass without applied RMF. In addition, underlying mechanisms for the effect of RMF on the solidification process of special nickel brass and evolution of NiAl(Si) phase, as well as the resultant mechanical properties was discussed and clarified. It is anticipated that this present study would provide a feasible and effective approach to tailor the solidification microstructure and mechanical properties of the commercial brass for industrial application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Metallurgy and Material Science · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Effect of aluminum addition on microstructure and properties of a novel nickel–silicon-containing brass10.1557/jmr.2020.141 ↗
2. Study on corrosion behavior of (CuZnMnNi)Sn high-entropy brass alloy in 5 wt% NaCl solution100−xx10.1016/j.jallcom.2022.166051 ↗
3. Study on a Ni-P-nano TiN composite coating for significantly improving the service life of copper alloy synchronizer rings10.1016/j.apsusc.2019.144116 ↗
4. Study of the mechanical, structural, and electrical properties and annealing effect of a Cu–30Zn–1Ni–0.2Si alloy fabricated using cryogenic rolling10.1088/2053-1591/ab49cd ↗
5. A novel Cu-10Zn-1.5Ni-0.34Si alloy with excellent mechanical property through precipitation hardening10.1007/s11665-016-2354-3 ↗
6. Growth mechanism of primary Ti5Si3 phases in special brasses and their effect on wear resistance10.1016/j.jmst.2020.05.063 ↗
7. Investigation into the thermal behaviour of the B2–NiAl intermetallic alloy produced by compaction and sintering of the elemental Ni and Al powders10.1016/j.vacuum.2019.108919 ↗
8. Overview No. 104 The physical and mechanical properties of NiAl10.1016/0956-7151(93)90001-9 ↗
9. Effect of rotary electromagnetic stirring during solidification of In-situ Al-TiB2 composites10.1016/j.matdes.2016.10.007 ↗
10. Characterization of microstructure and nanoscale phase in Mg-15Gd-1Zn (wt%) alloy fabricated by rotating magnetic field casting10.1016/j.matchar.2020.110660 ↗
11. Do rotating magnetic fields unconditionally lead to grain refinement? A case study for directionally solidified Al-10wt% Cu alloys10.1016/j.mtla.2018.08.036 ↗
12. Effect of rotating magnetic field on the microstructures and physical properties of Al–Cu–Co ternary eutectic alloy10.1016/j.jallcom.2015.05.162 ↗
13. Efficient melt stirring using pulse sequences of a rotating magnetic field: Part II. Application to solidification of Al-Si alloys10.1007/s11663-008-9126-x ↗
14. Rotating magnetic fields: fluid flow and crystal growth applications10.1016/S0960-8974(99)00007-8 ↗
15. The columnar-to-equiaxed transition in Pb–Sn alloys affected by electromagnetically driven convection10.1016/j.msea.2005.03.108 ↗
16. Effect of rotating magnetic field on the microstructure and properties of Cu–Ag–Zr alloy10.1016/j.msea.2014.11.064 ↗
17. In situ synthesis of TiB2 particulate reinforced copper matrix composite with a rotating magnetic field10.1016/j.matdes.2014.09.025 ↗
18. Chemical redistribution and change in crystal lattice parameters during stress relaxation annealing of the AD730TM superalloy10.1016/j.actamat.2022.118141 ↗
19. Atkins · 1978
20. Thermodynamic and lattice parameter calculation of TiCx produced from Al-Ti-C powders by laser igniting self-propagating high-temperature synthesis10.1016/j.msea.2006.12.075 ↗
21. Diffusion of carbon and titanium in γ -iron in a magnetic field and a magnetic field gradient10.1007/s10853-005-2683-3 ↗
22. Effects of a strong magnetic field on the phase stability of plain carbon steels10.1016/S1359-6462(00)00394-8 ↗
23. Q.S. Li, C.J. Song, H.B. Li, Q.J. Zhai, Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steel, 466 (2007) 101–105.10.1016/j.msea.2007.03.061 ↗
24. Microstructural characteristics and mechanical properties of Mg-Zn-Y alloy containing icosahedral quasicrystals phase treated by pulsed magnetic field10.1016/j.jallcom.2016.07.280 ↗
25. Theoretical discussion of the effect of a low-frequency electromagnetic vibrating field on the as-cast microstructures of DC Al–Zn–Mg–Cu–Zr ingots10.1016/j.jcrysgro.2006.07.025 ↗
26. Modification of the microstructure by rotating magnetic field during the solidification of Al-7 wt% Si alloy under microgravity10.1016/j.jallcom.2020.155458 ↗
27. Separation mechanism of the primary Si phase from the hypereutectic Al–Si alloy using a rotating magnetic field during solidification10.1016/j.actamat.2014.03.031 ↗
28. Thermodynamic properties of liquid metals10.1016/0921-5093(94)90515-0 ↗
29. Grain refinement induced by electromagnetic stirring: a dendrite fragmentation criterion10.1007/s11661-004-0064-1 ↗
30. Comparative study on structural transformation of low-melting pure Al and high-melting stainless steel under external pulsed magnetic field10.1016/j.matlet.2007.01.007 ↗
31. Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steel10.1016/j.msea.2007.03.061 ↗
32. Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling10.1016/j.msea.2004.05.049 ↗