Magnetocaloric performance optimized by simple compression in directionally solidified Ni50Mn18Cu7Ga25 alloy
Source abstract
Abstract
The Magnetocaloric Effect (MCE) of directionally solidified Ni 50Mn 18Cu 7Ga 25 alloy was improved based on texturation and introduction of extra phase transition in this paper. Magneto-structural transition is realized in directionally solidified Ni 50Mn 18Cu 7Ga 25 alloy, with a value of Adiabatic Temperature Variation (Δ T ad ) of − 1.35 K under magnetic field of 1.5 T. Through simple unidirectional compression, preferred orientation is formed and intermartensitic transformation is introduced in the present alloy. Preferred orientation strengthens the coupling of magnetic and structural transition, intermartensitic transformation makes transformation path more diverse, which both enhance Δ T ad of the directionally solidified alloy. A value of Δ T ad of − 2.34 K is obtained in the deformed alloy under magnetic field of 1.5 T, with a 73.3 % increase compared with the initial state. Moreover, the two incompletely overlapping structural transitions broadens the temperature range of MCE from 4.3 K to 7 K. The present work provides new insight on the MCE optimization of Ni-Mn-Ga alloy by simple and short-term unidirectional compression in view of merging different strengthening mechanisms.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Magnetic and transport properties of perovskites and related materials · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Caloric effects in ferroic materials: new concepts for cooling10.1002/adem.201100178 ↗
2. Advanced materials for solid-state refrigeration10.1039/c3ta01289a ↗
3. Caloric materials near ferroic phase transitions10.1038/nmat3951 ↗
4. Magnetostructural transition and magnetocaloric effect in Ni55Mn20Ga25 single crystals10.1103/PhysRevB.72.094435 ↗
5. Large low-field magnetocaloric effect in a directionally solidified Ni50Mn18Cu7Cu25 alloy10.1016/j.intermet.2017.05.002 ↗
6. Optimizing the caloric properties of Cu-doped Ni-Mn-Ga alloys10.3390/ma13020419 ↗
7. Tunable magnetocaloric effect in Ni-Mn-Ga microwires10.1038/s41598-018-35028-9 ↗
8. Giant magnetocaloric effect from reverse martensitic transformation in Ni-Mn-Ga-Cu ferromagnetic shape memory alloys10.1016/j.jallcom.2016.02.039 ↗
9. Giant elastocaloric effect in Ni-Mn-Ga-based alloys boosted by a large lattice volume change upon the martensitic transformation10.1021/acsami.1c22235 ↗
10. Large reversible magnetic-field-induced strain in a trained Ni49.5Mn28Ga22.5 polycrystalline alloy10.1016/j.jallcom.2019.04.038 ↗
11. Effect of crystallographic alignment on the magnetocaloric effect in alloys near the Ni2MnGa stoichiometry10.1063/1.4793608 ↗
12. Magnetocaloric response of non-stoichiometric Ni2MnGa alloys and the influence of crystallographic texture10.1016/j.actamat.2015.06.059 ↗
13. Significant enhancement of magnetocaloric effect in a NiMnCuGa Heusler alloy through textural modification10.1063/5.0003366 ↗
14. The magnetocaloric effect in thermally cycled polycrystalline Ni-Mn-Ga10.1063/1.3676608 ↗
15. Large rotating magnetocaloric effects in polycrystalline Ni-Mn-Ga alloys10.1016/j.jallcom.2021.159755 ↗
16. Reducing hysteresis losses by heating minor loops in magnetocaloric Ni-Mn-Ga-Co films10.1002/ente.201800134 ↗
17. Texturation and functional behaviors of polycrystalline Ni-Mn-X phase transformation alloys
18. Enhancing the elastocaloric effect in Ni-Mn-Ga alloys through the coupling of magnetic transition and two-step structural transformation10.1063/5.0048588 ↗
19. Large elastocaloric effect driven by stress-induced two-step structural transformation in a directionally solidified Ni55Mn18Ga27 alloy10.1016/j.scriptamat.2019.01.014 ↗
20. Two successive magneto-structural transformations and their relation to enhanced magnetocaloric effect for Ni55.8Mn18.1Ga26.1 Heusler alloy
21. Enhanced magnetocaloric effect in Ni-Mn-Sn-Co alloys with two successive magnetostructural transformations
22. Deformation of Ni-Mn-Ga 7M modulated martensite through detwinning/twinning and forward/reverse intermartensitic transformation studied by in-situ neutron diffraction and interrupted in-situ EBSD10.1016/j.actamat.2019.05.054 ↗
23. Plastic deformation of Ni-Mn-Ga 7M modulated martensite by twinning & detwinning and intermartensitic transformation10.1016/j.ijplas.2017.07.006 ↗
24. Tuning the reversible magnetocaloric effect in Ni-Mn-In-based alloys through Co and Cu Co‐doping10.1002/aelm.201800845 ↗
25. Direct measurement of shape memory effect for Ni54Mn21Ga25, Ni50Mn41.2In8.8 Heusler alloys in high magnetic field10.1016/j.jmmm.2019.02.087 ↗
26. Magnetocaloric properties of Gd in fields up to 14 T10.1016/j.jmmm.2017.03.027 ↗
27. Adiabatic temperature change at first-order magnetic phase transitions: Ni 2.19 Mn 0.81 Ga as a case study10.1103/PhysRevB.78.060403 ↗
28. Magnetocaloric effect and magnetic phase diagram of Ni-Mn-Ga Heusler alloy in steady and pulsed magnetic fields10.1016/j.jallcom.2022.164051 ↗
29. Transformation process dependent magnetocaloric properties of annealed Ni50Mn18Cu7Ga25 ribbons10.1016/j.jallcom.2016.12.178 ↗
30. Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation
31. Crossing twin of Ni-Mn-Ga 7M martensite induced by thermo-mechanical treatment10.1016/j.actamat.2019.11.065 ↗