Synthesis and properties of Na2Al2Ti6O16-containing ceramic materials
Source abstract
Abstract
Abstract The existence of liquid phases causes difficulties in Ti 4+ -activated sintering of alumina, at which soda is being involved. Knowledge of the system Al 2 O 3 -TiO 2 -Na 2 O is necessary in order to control the manufacturing of alumina-rich and titania-containing ceramics. In order to promote the development of Al 2 O 3 -TiO 2 -Na 2 O ceramic components and high-performance titania-containing alumina refractories, sample bodies containing a different portion of Na 2 Al 2 Ti 6 O 16 phase were prepared by mixing different types of sodium-containing raw materials, alumina, and titania. A double solid state synthesis has been adopted to manufacture sample bodies without deformation. After sintering at 1140 °C, a dense ceramic material with almost single phase of Na 1.97 Al 1.82 Ti 6.15 O 16 was obtained by the usage of Na 2 CO 3 at a molar ratio of 1:6:1 (Al 2 O 3 :TiO 2 :Na 2 O), which has an open porosity of 3.9% and a bending strength of 105 MPa, but a low thermal shock resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear materials and radiation effects · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Defect models for sintering and densification of Al2O3:Ti and Al2O3:Zr10.1111/j.1151-2916.1984.tb19723.x ↗
2. Phase studies concerning sintering in aluminas doped with Ti4+10.1111/j.1151-2916.1985.tb15226.x ↗
3. Influence of TiO2- and ZrO2-addition on the interaction of alumina castable with molten coal and gasifier slag10.1016/j.fuel.2015.02.024 ↗
4. Microstructure and mechanical properties of Al2O3–20wt%Al2TiO5 composite prepared from alumina and titania nanopowders10.1016/j.ceramint.2012.07.015 ↗
5. Aluminum titanate-calcium dialuminate composites with low thermal expansion and high strength10.1016/j.jallcom.2015.09.237 ↗
6. Non isothermal kinetic study of the aluminium titanate formation in alumina-titania mixtures10.1590/S0366-69132014000300013 ↗
7. High temperature water vapor corrosion behavior of titanium aluminate (Al2TiO5)10.2109/jcersj.111.860 ↗
8. Aluminium titanate - a new material for the nonferrous metal industry
9. Al2O3 - TiO2 dispersion-strengthened granular refractory ceramics10.1007/s11148-006-0081-2 ↗
10. The crystal structure of NaTi2Al5O1210.1107/S0365110X67003652 ↗
11. Rietveld powder structure refinement of Na2Al2Ti6O16; Comparison of synchrotron radiation and conventional x-ray tube datasets10.1557/JMR.1990.1538 ↗
12. Synthesis and structure refinement of sodium titanogallate containing one-dimensional channels of large cross section10.1016/0025-5408(93)90086-S ↗
13. Conductivity of reduced solid solutions in the system Na2O-Al2O3-TiO210.1016/0025-5408(80)90091-4 ↗
14. Immobilization of sodium-bearing high-level radioactive waste in synroc containing Na2Al2Ti6O16-type freudenbergite10.1111/j.1151-2916.1998.tb02570.x ↗
15. Synroc immobilization of high level waste (HLW) bearing a high content of sodium10.1016/S0956-053X(97)00019-6 ↗
16. Vaporization and decomposition of sodium sulfate. Thermodynamics and kinetics10.1021/j100450a007 ↗
17. The structures of Na2Ti6O13 and Rb2Ti6O13 and the alkali metal titanates10.1107/S0365110X62000511 ↗