journal article·2025-10Open access

Effect of Ni and Fe content on the plastic deformation behavior of Co–Cr–Fe–Ni–Mo alloys: A combined computational and experimental study

Kai Hiyama, Tomoki Nakajima, Ryoji Sahara, Kyosuke Ueda, Takayuki Narushima

Abstract

ASTM F1058 Co–22Cr–17Fe–15Ni–4Mo (mol%) alloys (equivalent to Co–20Cr–16Fe–15Ni–7Mo in mass%) are widely used in biomedical applications, particularly in balloon-expandable stents, which require a combination of high ultimate tensile strength (UTS), good ductility, and low 0.2 % proof strength. To optimize the mechanical properties of these alloys, it is essential to understand their plastic deformation behavior. In this study, first-principles calculations, microstructural analysis, and mechanical property evaluation were used to investigate the stacking fault energy (SFE) and plastic deformation behavior of these alloys as a function of their Ni and Fe content. First-principles calculations indicated that their SFE increased with increasing Ni and Fe content, with Ni influencing the SFE more than Fe. Experimentally, increasing the Ni content suppressed the γ-to-ε stress-induced martensitic transformation during plastic deformation, resulting in improved ductility without compromising strength. With increasing Ni content, the plastic deformation mechanism in the early stage changed from martensitic transformation and/or deformation twinning to dislocation slip, attributable to an increase in the SFE. This study indicates that SFE evaluation by first-principles calculations is an effective approach for designing Co–Cr-based multicomponent systems from the perspective of plastic deformation mechanisms. • Ni effects the stacking fault energy (SFE) more than Fe in Co–Cr–Fe–Ni–Mo alloys. • Cr in Co-based alloys may reduce the SFE-enhancing ability of Fe. • Ni suppresses γ-to-ε strain-induced martensitic transformation. • Ni shifts the early plastic deformation mechanism from non-slip to slip. • Combining computational and experimental approaches in alloy design.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Shape Memory Alloy Transformations · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
4. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
5. Development of CoCrWNi alloy through stacking fault energy modeling by first-principles, computational thermodynamic, and experimental methods10.1007/s12540-025-01894-y ↗
6. Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys10.1016/j.actamat.2019.09.050 ↗
7. Significant lattice-distortion effect on compressive deformation in Mo-added CoCrFeNi-based high-entropy alloys10.1016/j.msea.2021.142295 ↗
8. Calculation-driven design of off-equiatomic high-entropy alloys with enhanced solid-solution strengthening10.1016/j.msea.2021.141359 ↗
9. Suzuki hardening and segregation in Co0.95Cr0.8Fe0.25Ni1.8Mo0.475 high-entropy alloys10.1016/j.scriptamat.2022.115260 ↗
10. Revisiting MP35N and MP159: the route to ultra-strong Co–Cr–Ni medium entropy alloys10.1016/j.intermet.2022.107507 ↗
11. Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures10.1016/j.ijplas.2018.10.005 ↗
12. Elevated fatigue crack growth resistance of Mo alloyed CoCrFeNi high entropy alloys10.1016/j.engfracmech.2019.106579 ↗
13. Improving mechanical properties of Co-Cr-Fe-Ni high entropy alloy via C and Mo microalloying10.3390/ma17020529 ↗
14. ASTM F1058-16 · 2019 · 13 · 01
15. Assessment of wrought ASTM F1058 cobalt alloy properties for permanent surgical implants10.1002/(SICI)1097-4636(199723)38:3<229::AID-JBM7>3.0.CO;2-R ↗
16. Comparing and optimizing Co-Cr tubing for stent applications
17. Stent tubing: understanding the desired attributes
18. Future balloon-expandable stents: high or low-strength materials?10.1007/s13239-019-00450-1 ↗
19. Twinning and strain-induced f.c.c. → h.c.p. transformation on the mechanical properties of Co-Ni-Cr-Mo alloys10.1016/0025-5416(76)90234-2 ↗
20. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
21. Probing plastic deformation-related properties in static recrystallized Co–Cr–Fe–Ni–Mo alloy for biomedical applications10.1016/j.msea.2024.146458 ↗
22. Can experiment determine the stacking fault energy of metastable alloys?10.1016/j.matdes.2020.109396 ↗
23. Theory of transformation-mediated twinning10.1093/pnasnexus/pgac282 ↗
24. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
25. Impact of chemical fluctuations on stacking fault energies of CrCoNi and CrMnFeCoNi high entropy alloys from first principles10.3390/e20090655 ↗
26. The effect of Si addition on the structure and mechanical properties of equiatomic CoCrFeMnNi high entropy alloy by experiment and simulation10.1016/j.mtla.2023.101707 ↗
27. Effect of Zn addition on phase evolution in AlCrFeCoNiZn high-entropy alloy10.1002/adem.202400827 ↗
28. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
29. CPA descriptions of random Cu-Au alloys in comparison with SQS approach10.1016/j.commatsci.2016.11.045 ↗
30. Thermodynamics of the pseudobinary GaAs1-xBix (0≤x≤1) alloys studied by different exchange-correlation functionals, special quasi-random structures and Monte Carlo simulations10.1016/j.cocom.2015.09.002 ↗
31. First-principles study of the phase stability and elastic properties of Ti-X alloys (X = Mo, Nb, Al, Sn, Zr, Fe, Co, and O)10.1016/j.jallcom.2017.08.128 ↗
32. Order–disorder competition in equiatomic 3d–transition–metal quaternary alloys: phase stability and electronic structure
33. Sims · 1987 · 135
34. Effects of Ni and Mo on the microstructure and some other properties of Co–Cr dental alloys10.1016/j.jallcom.2003.07.004 ↗
35. ASTM F562-22, Standard specification for wrought 35cobalt-35nickel-20chromium-10molybdenum alloy for surgical implant applications (UNS R30035), vol.13.01, ASTM International, USA, 2022. https://doi.org/10.1520/F0562-22.10.1520/F0562-22 ↗
36. Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy
37. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments10.1080/14686996.2022.2080512 ↗
38. Automating first-principles phase diagram calculations10.1361/105497102770331596 ↗
39. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
40. Evaluating the phase stability of binary titanium alloy Ti-X (X = Mo, Nb, Al, and Zr) using first-principles calculations and a Debye model10.1016/j.calphad.2020.102207 ↗
41. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
42. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
43. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
44. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
45. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
46. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
47. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
48. Density functional theory study on stacking faults and twinning in Ni nanofilms10.1016/j.scriptamat.2008.09.018 ↗
49. Temperature-dependent ideal strength and stacking fault energy of fcc Ni: a first-principles study of shear deformation10.1088/0953-8984/24/15/155402 ↗
50. 2020
51. Effect of strain on the intrinsic stacking fault energy of fcc Co: a first-principles study10.1007/s10853-018-2320-6 ↗
52. Effects of alloying elements concentrations and temperatures on the stacking fault energies of Co-based alloys by computational thermodynamic approach and first-principles calculations10.1016/j.jallcom.2016.10.113 ↗
53. First-principles calculations of generalized-stacking-fault-energy of Co-based alloys10.1016/j.commatsci.2016.04.031 ↗
54. Corrosion of cobalt and cobalt alloys10.5006/0010-9312-25.7.307 ↗
55. Improvement of mechanical properties of Co–Cr–W–Ni alloy tube suitable for balloon-expandable stent applications through heat treatment10.1016/j.msea.2022.144505 ↗
56. Exceptional balance of strength and ductility in biomedical Co-Cr-W-Ni alloy with added carbon10.1016/j.msea.2024.146722 ↗