Effect of single-step hot isostatic pressing & solution treatment on the microstructure of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion
Source abstract
Abstract
Hot isostatic pressing (HIP) is increasingly used as a post-processing technique for components produced via laser powder bed fusion (LPBF). However, the microstructural evolution of the as-HIPed condition, particularly in precipitation-hardening alloys, remains largely unexplored. This study investigates the as-HIPed microstructure of a precipitation-hardening Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by LPBF. A combined HIP & solution treatment (HIP-Quench) was performed in a single-step to evaluate the effectiveness of HIP in promoting the dissolution of secondary phases. The HIP cycle involved a controlled ramp rate (7 °C/min) to the desired solution temperature, a 1-hour hold at 100 MPa, followed by quenching. Solution temperatures of 530 °C and 540 °C were examined. For a comparison, an equivalent non-HIP cycle with various interruptions was conducted. Preliminary assessments revealed a reduction in porosity from 0.23% in the as-built condition to 0.05% and 0.07% in the as-HIPed conditions. Microstructural analysis indicated that, despite HIP-Quench being conducted at different solutioning temperatures, the complete dissolution of the θ-Al₂Cu phase was not achieved. Furthermore, signs of incipient melting along the grain boundaries were noticed in both HIPed samples but were absent in the non-HIPed samples. The findings suggest that HIP treatment induces re-precipitation of the blocky θ-Al₂Cu phase along the grain boundaries, which subsequently undergoes interfacial premelting.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges10.1063/1.4937809 ↗
2. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
3. SAE International, AMS AM Additive Manufacturing Metals, Aluminum Alloy Powder 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg, SAE International, 2021, n.d. https://doi.org/https://doi.org/10.4271/AMS7033.10.4271/AMS7033 ↗
4. S.A. Butler, An aluminium-copper alloy, GB2334966A, UK Pat. (2003).
5. Microstructure and mechanical properties of a TiB2-modified Al–Cu alloy processed by laser powder-bed fusion10.1016/j.msea.2020.140209 ↗
6. Effect of TiB2 addition on the microstructure and mechanical properties of Al-Cu-Mg-Ag alloy
7. Achieving strength-ductility balance in a laser powder bed fusion fabricated TiB2/Al–Cu-Mg-Ag alloy10.1016/j.jallcom.2023.169311 ↗
8. Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy10.1016/j.matdes.2022.111566 ↗
9. Atomic structure and evolution of a precursor phase of Ω precipitate in an Al-Cu-Mg-Ag alloy10.1016/j.actamat.2021.117538 ↗
10. Origin of the nucleation preference of coherent and semicoherent nanoprecipitates in Al–Cu alloys based on atomistically informed classical nucleation theory10.1016/j.jallcom.2022.168559 ↗
11. Microstructural design of high-strength aluminum alloys10.1361/105497198770341734 ↗
12. Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis
13. Processability and characterization of A20X aluminum alloy fabricated by laser powder bed fusion
14. The influence of post-thermal treatments on microstructure and mechanical properties in A20X alloy fabricated through powder bed fusion10.1016/j.jmapro.2024.07.019 ↗
15. Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
16. M.C. Brennan, J.S. Keist, T.A. Palmer, Defects in metal additive manufacturing processes, (2021).10.31399/asm.hb.v24.a0006557 ↗
17. The effect of heat treatment on local mechanical properties of laser powder bed fused and hot isostatically pressed Al-Cu-Mg-Ag-TiB2 (A20X) aluminum alloy10.1007/s11837-023-06233-3 ↗
18. Effect of hot isostatic pressing on the microstructure of laser powder bed fused A20XTM alloy
19. Exceptional fatigue life and ductility of new liquid healing hot isostatic pressing especially tailored for additive manufactured aluminum alloys10.1016/j.scriptamat.2023.115512 ↗
20. Liquid-induced healing of cracks in nickel-based superalloy fabricated by laser powder bed fusion10.1016/j.actamat.2024.119731 ↗
21. Fundamental aspects of hot isostatic pressing: an overview10.1007/s11661-000-0078-2 ↗
22. Densification mechanisms made during creep techniques applied to the hot isostatic pressing
23. Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy10.1108/RPJ-07-2019-0180 ↗
24. Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment10.1016/j.matchar.2020.110225 ↗
25. Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions10.1016/j.matdes.2021.109645 ↗
26. Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties10.1007/s10853-022-07027-9 ↗
27. A combination strategy for additive manufacturing of AA2024 high-strength aluminium alloys fabricated by laser powder bed fusion: Role of hot isostatic pressing10.1016/j.msea.2022.143597 ↗
28. Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via laser powder bed fusion (LPBF)10.1016/j.jallcom.2022.164213 ↗
29. G. Marchese, E. Bassini, A. Aversa, M. Lombardi, D. Ugues, P. Fino, S. Biamino, Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion, (2019). https://doi.org/10.3390/ma12030486.10.3390/ma12030486 ↗
30. Influence of temperature, pressure, and cooling rate during hot isostatic pressing on the microstructure of an SX Ni-base superalloy10.1016/j.matdes.2016.02.051 ↗
31. High Pressure Heat Treatment for L-PBF Hastelloy X
32. M. Ahlfors, High pressure heat treatment of AM parts - Combining HIP and heat treatment, 30th ASM Heat Treat. Soc. Conf. Expo. Heat Treat 2019 - Ext. Abstr. 2 (2019) 11–17. https://doi.org/10.31399/asm.cp.ht2019p0011.10.31399/asm.cp.ht2019p0011 ↗
33. Hot isostatic pressing (HIP) to achieve isotropic microstructure and retain as-built strength in an additive manufacturing titanium alloy (Ti-6Al-4V)10.1016/j.matlet.2019.126690 ↗
34. Effect of a New High-Pressure Heat Treatment on Additively Manufactured AlSi10Mg Alloy10.1007/s11661-020-05905-y ↗
35. Eckart GmbH, Technical Information Sheet - A205 gas atomized powder, (n.d.). 〈https://eckart.net/de/en/microsite/am〉.
36. Mg and mg-based blowing agents for aluminum foam10.1007/s11663-020-02008-2 ↗
37. Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 231910.1016/j.jmatprotec.2022.117769 ↗
38. Prediction of steel corrosion resistance based on EBSD-data analysis10.1088/1757-899X/192/1/012031 ↗
39. Influence of Al2Cu morphology on the incipient melting characteristics in B206 Al alloy10.1016/j.jallcom.2018.02.329 ↗
40. In-situ analysis of incipient melting of Al2Cu in a novel high strength Al-Cu casting alloy using laser scanning confocal microscopy10.1016/j.matchar.2019.110064 ↗
41. Analysis of endurance limits under very high cycle fatigue using a unified damage approach10.1016/j.ijfatigue.2007.02.028 ↗
42. V. Kerlins, Modes of fracture, in: Fractography, Vol 12, By ASM Handb. Committee, ASM Int., 1987: p. p 12–71.10.31399/asm.hb.v12.a0001831 ↗
43. Advances in 3D focused ion beam tomography10.1557/mrs.2014.54 ↗
44. Depth Resolution and Surface Sensitivity with the Multiple Detection System of a HR-SEM10.1002/9783527808465.EMC2016.6393 ↗
45. A review and a statistical analysis of porosity in metals additively manufactured by laser powder bed fusion
46. Factors that affect the properties of additively-manufactured AlSi10Mg: Porosity versus microstructure
47. Influence of trapped gas on pore healing under hot isostatic pressing in nickel-base superalloys10.3390/cryst10121147 ↗
48. Role of grain boundary segregation in diffusional creep10.1007/BF02643770 ↗
49. Vacancy-mediated transport and segregation tendencies of solutes in fcc nickel under diffusional creep: A density functional theory study
50. Microstructural evolution of Al-Cu-Mg-Ag alloy during homogenization10.1016/j.jallcom.2009.05.046 ↗
51. Dependence of Creep Properties on Aging Treatment in Al–Cu–Mg Alloy10.1002/adem.202101293 ↗
52. Effect of grain-boundary θ-Al2Cu precipitates on tensile and compressive creep properties of cast Al–Cu–Mn–Zr alloys10.1016/j.msea.2022.142946 ↗
53. Mechanisms of precipitation induced by large strains in the Al-Cu system10.1016/j.jallcom.2017.03.312 ↗
54. Modelling the effect of deformation-induced vacancies on segregation and precipitation10.1016/0956-7151(94)90056-6 ↗
55. M.E. Kassner, M.-T. Pérez-Prado, Five-Power-Law Creep, 2004. https://doi.org/10.1016/b978-008043637-1/50003-x.10.1016/B978-008043637-1/50003-X ↗
56. Dissolution of Al2Cu phase in non-modified and Sr modified 319 type alloys10.1179/136404608X347662 ↗
57. Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment10.1007/BF02651928 ↗
58. Optimization of solution treatment of cast Al-7Si-0.3 Mg and Al-8Si-3Cu-0.5 Mg alloys10.1007/s11661-013-2141-9 ↗
59. Premelting dynamics10.1146/annurev.fluid.37.061903.175758 ↗
60. Dissolution and melting of secondary Al2Cu phase particles in an AlCu alloy10.1007/BF02672585 ↗
61. Heat-affected zone liquation cracking resistance of friction stir processed aluminum-copper alloy AA 221910.1007/s11663-016-0892-6 ↗
62. Phase-field crystal study of grain-boundary premelting10.1103/PhysRevB.78.184110 ↗
63. Melting at dislocations and grain boundaries: a phase field crystal study10.1103/PhysRevB.77.224114 ↗
64. Hot isostatic processing of metal matrix composites10.1016/S0261-3069(97)00058-7 ↗
65. Properties and abrasive wear of TiB2/Al-4%Cu composites produced by hot isostatic pressing10.1016/S0266-3538(99)00056-1 ↗