journal article·2025-06Open access

Dynamic precipitation in Al–Zn–Mg–Cu Alloys: A comparative analysis of uniaxial tension and cross-die forming

Ziyu Ma, Elliot Cooksey-Nash, Madeleine Bignon, Adam Taylor, Joseph D. Robson, Matthew R. Barnett

Abstract

Al-Zn-Mg-Cu alloys are known for their exceptional mechanical properties, primarily achieved through precipitation hardening. This study investigates the dynamic precipitation behaviour in a pre-aged AA7075 alloy under uniaxial tension and cross-die forming at 180 °C. In-situ synchrotron small-angle X-ray scattering (SAXS) revealed a non-monotonic precipitate growth behaviour under uniaxial tension, where growth was initially accelerated but slowed as strain exceeded 7%. Synchrotron SAXS and wide-angle X-ray scattering (WAXS) were used to simultaneously map precipitation and deformation across regions with varied strain conditions in samples subjected to warm cross-die forming demonstrating local variations in precipitation and dislocation arrangement, along with an inverse dependence of precipitate growth on plastic strain. A modified Kampmann-Wagner Numerical (KWN) model was applied to successfully predict the overall precipitation behaviour, highlighting that the competing effects of deformation-induced vacancies enhancing diffusivity and the reduction of supersaturation due to precipitate growth are of primary importance, while the potential influence of strain path in monotonic deformation is of secondary significance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Application of modern aluminum alloys to aircraft10.1016/0376-0421(95)00004-6 ↗
2. Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys10.1016/j.actamat.2009.09.003 ↗
3. Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. Microstructure evolution and mechanical properties10.1016/S1359-6454(98)00293-6 ↗
4. In-situ small-angle X-ray scattering study of dynamic precipitation in an Al–Zn–Mg–Cu alloy10.1080/0141861021000051091 ↗
5. Precipitation kinetics in a severely plastically deformed 7075 aluminium alloy10.1016/j.actamat.2013.11.071 ↗
6. Precipitation kinetics in warm forming of AW-7020 alloy10.1016/j.msea.2012.10.031 ↗
7. Investigations on warm forming of aw-7020-t6 alloy sheet10.1016/j.jmatprotec.2014.03.024 ↗
8. Dynamic precipitation and recrystallization behavior during hot deformation of Al–Zn–Mg–Cu alloy: Experiment and modeling10.1016/j.ijplas.2024.103995 ↗
9. In situ evaluation of dynamic precipitation during plastic straining of an Al–Zn–Mg–Cu alloy10.1016/j.actamat.2012.01.002 ↗
10. Quantitative measurements of dynamic precipitation during fatigue of an Al–Zn–Mg–(Cu) alloy using small-angle X-ray scattering10.1016/j.actamat.2014.04.027 ↗
11. An investigation of the strain dependence of dynamic precipitation in an Al–Zn–Mg–Cu alloy10.1016/j.scriptamat.2017.04.031 ↗
12. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
13. Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays10.1016/j.actamat.2020.116532 ↗
14. Dynamic precipitation in supersaturated Al–Zn–Mg–Cu alloy during warm stretching
15. In-situ investigation of dynamic precipitation in pre-aged Al–Zn–Mg–Cu alloy AA707510.1016/j.jallcom.2023.172098 ↗
16. Strain-induced clustering in Al alloys10.1016/j.mtla.2023.101964 ↗
17. Deformation enhanced diffusion in aluminium alloys10.1007/s11661-020-05960-5 ↗
18. Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al–Zn–Mg alloy10.1016/j.actamat.2021.116682 ↗
19. Modelling dynamic precipitation in pre-aged aluminium alloys under warm forming conditions10.1016/j.actamat.2022.118036 ↗
20. Interactions between plastic deformation and precipitation in aluminium alloys: A crystal plasticity model10.1016/j.actamat.2023.118735 ↗
21. Precipitation kinetics in metallic alloys: Experiments and modeling10.1016/j.actamat.2021.117338 ↗
22. Microstructural stability and paint bake response of pre-aged AA707510.1016/j.matchar.2023.112862 ↗
23. I22: SAXS/WAXS beamline at diamond light source–an overview of 10 years operation10.1107/S1600577521002113 ↗
24. I12: the joint engineering, environment and processing (JEEP) beamline at diamond light source10.1107/S1600577515003513 ↗
25. Data analysis workbench (DAWN)10.1107/S1600577515002283 ↗
26. Precipitate characterisation in metallic systems by small-angle X-ray or neutron scattering10.1016/j.crhy.2011.12.008 ↗
27. Determination of size distribution from small-angle scattering data for systems with effective hard-sphere interactions10.1107/S0021889893013810 ↗
28. A comparative study of precipitate composition and volume fraction in an Al–Zn–Mg alloy using tomographic atom probe and small-angle X-ray scattering10.1080/01418610108217154 ↗
29. Homogeneous second-phase precipitation10.1002/352760264X.ch5 ↗
30. Modelling the overlap of nucleation, growth and coarsening during precipitation10.1016/j.actamat.2004.06.024 ↗
31. Implementation of classical nucleation and growth theories for precipitation10.1016/j.actamat.2007.12.050 ↗
32. Theory of growth of spherical precipitates from solid solution10.1063/1.1698258 ↗
33. Gibbs–Thomson effects in phase transformations10.1016/j.scriptamat.2004.12.026 ↗
34. Modelling the effect of deformation-induced vacancies on segregation and precipitation10.1016/0956-7151(94)90056-6 ↗
35. In situ nuclear magnetic resonance investigation of deformation-generated vacancies in aluminum10.1103/PhysRevB.52.125 ↗
36. Diffusion coefficients of some solutes in fcc and liquid al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
37. The nucleation of precipitates: the system Al–Zn–Mg10.1016/0001-6160(65)90067-2 ↗
38. Atomistic study of pipe diffusion in Al–Mg alloys10.1016/j.actamat.2003.09.002 ↗
39. Mixtures of hard spheres in the Percus–Yevick approximation. Light scattering at finite angles10.1063/1.438756 ↗
40. Hard-sphere interactions between spherical domains in diblock copolymers10.1021/ma00139a013 ↗
41. Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis10.1016/j.msea.2010.08.059 ↗
42. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
43. N. Sotirov, P. Simon, T. Waltenberger, D. Uffelmann, C. Melzer, Towards high strength 7xxx aluminium sheet components through warm forming, in: Proceedings of the 12th International Conference on Aluminium Alloys, ICAA12, 2010, pp. 1237–1242.
44. A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components
45. Stamping of a cross-shaped part with 5052, 5754 and 6016 aluminum alloy sheets–experimental and finite element analysis comparison
46. The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation10.1016/j.msea.2007.06.093 ↗
47. Dislocation climb rate at very high vacancy concentrations10.1016/j.mtla.2019.100472 ↗