Study on the microstructure evolution and strengthening mechanism of Rheo-extruded A356 aluminum alloy with grain refiners addition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Effects of micron-sized Si particles on the static and dynamic mechanical properties and fracture behavior of Al-xSi alloy sheets
2. In situ X-ray imaging of α-Al(FeMn)Si grain evolution during solidification of an Al-Si alloy with electromagnetic stirring10.1016/j.jallcom.2024.175866 ↗
3. Rapid hydrogen generation from Al-Si alloy and recovery of the byproducts
4. Mechanical properties and microstructural evolution of rheocast A356 semi-solid slurry prepared by annular electromagnetic stirring10.1007/s41230-023-3041-2 ↗
5. Microstructure evolution and strengthening mechanism of A356/Al-X-Ce(Ti, C) system by inoculation treatment10.1016/j.jmrt.2023.12.057 ↗
6. Accurate simulation of complex temperature field in counter-pressure casting process using A356 aluminum alloy
7. Design, effect of Fe-rich intermetallics on the wear behavior of eutectic Al-Si piston alloy (LM13)10.1016/j.matdes.2010.02.015 ↗
8. Performance, effect of grain refiner on microstructural feature influence hardness and tensile properties of Al-7Si alloy
9. Effects of the addition of Mg on the microstructure and mechanical properties of hypoeutectic Al-7% Si alloy
10. Technology, achieving superior grain refinement efficiency for Al-Si casting alloys through a novel Al-La-B grain refiner10.1016/j.jmrt.2024.03.070 ↗
11. Microstructure and properties of spinning deformed A356 alloy subject to the solution-DCT-aging multiplex heat treatment10.1016/j.jmrt.2023.02.157 ↗
12. Effect of deep cryogenic treatment on microstructures and mechanical properties of automotive 6063Al alloy10.1007/s10853-024-09505-8 ↗
13. Modification of FeCoNi1.5CrCuP/2024Al composites subject to improved aging treatments with cryogenic and magnetic field10.1016/j.jallcom.2023.171763 ↗
14. A calculation model for cooling rate of aluminum alloy melts during continuous rheo-extrusion10.3390/ma14195684 ↗
15. Effect of Sc on microstructure and mechanical properties of Al-Mg alloys during continuous rheo-extrusion
16. Formation mechanism of refined Al6(Mn, Fe) phase particles during continuous rheo-extrusion and its contribution to tensile properties in Al-Mg-Mn-Fe alloys10.1016/j.msea.2023.144952 ↗
17. Dynamic recrystallization behavior and mechanical properties response of rheo-extruded Al-Mg alloys with various Mg contents10.1016/j.msea.2022.143450 ↗
18. Effects of Mg17Al12 phase on microstructure evolution and ductility in the AZ91 magnesium alloy during the continuous rheo-squeeze casting-extrusion process10.1016/j.jmst.2023.12.031 ↗
19. Squeeze casting for metal alloys and composites: An overview of influence of process parameters on mechanical properties and microstructure10.1007/s41230-022-2030-1 ↗
20. Study on formation of microstructure in rheo-diecastings of semi-solid A380 aluminum alloy slurry10.1007/s12540-020-00733-6 ↗
21. Effect of Ti, Sc and Zr additions on microstructure and mechanical properties of rheo-diecasting Al-6Zn-2Mg-2Cu alloys10.1007/s41230-022-2028-8 ↗
22. Improved microstructures of AZ31 magnesium alloy by semi-solid extrusion10.1016/j.msea.2020.140204 ↗
23. Injection printing: additive molding via shell material extrusion and filling
24. Semisolid rheoforming of magnesium alloys: a review10.1016/j.matdes.2020.108990 ↗
25. Optimization strategy for the indirect isothermal extrusion of high-strength aluminum alloy based on temporal fusion transformer10.1007/s00170-023-11370-9 ↗
26. Corrosion behaviours of hot-extruded Al-xMg alloys10.1016/j.jmrt.2019.08.047 ↗
27. Fabrication of aluminum-magnesium clad composites by continuous extrusion10.1016/j.msea.2020.140670 ↗
28. Microstructural evolution and strengthening mechanism of Al-Mg alloys with fine grains processed by accumulative continuous extrusion forming10.1016/j.jmst.2022.03.032 ↗
29. Mechanical properties of refined A356 alloy in response to continuous rheological extruded Al-5Ti-0.6C-1.0Ce alloy prepared at different temperatures10.3390/met13081344 ↗
30. Effects of different heat treatment on microstructure, mechanical and conductive properties of continuous Rheo-extruded Al-0.9Si-0.6Mg (wt%) alloy10.3390/met5020648 ↗
31. Modification and refinement of Fe-containing phases, mechanical properties and strengthening mechanisms in Al-Fe alloys via Cr alloying and continuous rheo-extrusion10.1016/j.msea.2022.143557 ↗
32. Measurement of the critical resolved shear stress for basal slip in magnesium alloys using instrumented indentation10.1016/j.scriptamat.2018.07.003 ↗
33. Shear stress-triggered deformation of microparticles in a tapered microchannel10.3390/polym13010055 ↗
34. Shear model of metal melt flowing on vibration wall and effect of shear stress on solidification microstructure10.1007/s40195-017-0690-4 ↗
35. Metal foams: a review for mechanical properties under tensile and shear stress10.3389/fmats.2022.998673 ↗
36. Evolution of recrystallization texture in non-oriented electrical steels during final annealing - influence of shear stress after cold rolling
37. Effect of pre-ageing on dynamic strain ageing in Al-Mg-Si alloys10.1016/j.msea.2017.01.051 ↗
38. On the influence of precipitation on the dynamic strain aging in Mg-2%Nd10.1007/s11837-023-05796-5 ↗
39. Enhanced grain refinement of Al-Si alloys by novel Al-V-B refiners10.1016/j.jmst.2021.02.065 ↗
40. High-temperature in-situ synthesis and formation mechanism of VB2 substrates in Al-V-B grain refiner
41. Grain refinement of AZ91 magnesium alloy induced by Al-V-B master alloy10.3390/met9121333 ↗
42. Grain refinement of hypoeutectic Al-7wt%Si alloy induced by an Al-V-B master alloy10.1016/j.jallcom.2019.152022 ↗
43. Effect of Al-V-B grain refiner on refining aluminium alloys: estimation from ab initio calculations10.1088/1757-899X/861/1/012047 ↗
44. Effect of (Ti + V)B2 on the Grain Structure of Al-7Si Alloy10.1007/s12666-023-02954-w ↗
45. On the effect of Nb-based compounds on the microstructure of Al-12Si alloy10.1016/j.matchemphys.2015.05.076 ↗
46. Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation10.1016/j.msea.2019.03.028 ↗
47. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion10.1016/j.scriptamat.2018.09.033 ↗
48. Effect of Mg content on the minimum grain size of Al-Mg alloys obtained by friction stir processing10.1016/j.scriptamat.2010.10.033 ↗
49. Microstructural evolution, dislocation density and tensile properties of Al-6.5Si-2.1Cu-0.35Mg alloy produced by different casting processes10.1016/j.jmst.2021.02.074 ↗
50. On the effect of fine second-phase particles on primary recrystallization as a function of strain10.1016/S1359-6454(96)00215-7 ↗
51. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
52. The relationship between viscosity and refinement efficiency of pure aluminum by Al-Ti-B refiner10.1016/j.jallcom.2006.08.257 ↗
53. Grain refinement and mechanical properties enhancement of Cu-10 wt% Fe alloys via Zr addition10.1016/j.msea.2022.143309 ↗
54. Shear deformation mechanical performance of Ni-Co alloy nanoplate by molecular dynamics simulation10.1142/S0217984921503231 ↗
55. Investigation of the 12 orientations variants of nanoscale Al precipitates in eutectic Si of Al-7Si-0.6 Mg alloy10.1016/j.jmst.2020.06.032 ↗
56. Effect of Ce on microstructure and mechanical properties of Mg-Zn-Ce magnesium alloys10.1007/s41230-023-2183-6 ↗
57. On the additivity of solid solution and dispersion strengthening10.1016/S0921-5093(01)00937-6 ↗
58. Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys10.1016/j.actamat.2018.11.031 ↗
59. Strengthening mechanisms and modelling of mechanical properties of submicron-TiB2 particulate reinforced Al 7075 metal matrix composites10.1016/j.msea.2021.141873 ↗
60. Effects of natural aging on the formation and strengthening effect of GP zones in a retrogression and re-aged Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2020.154469 ↗
61. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
62. Microstructure and properties of FeCoNi1.5CrCup/Al high-entropy alloy strengthened aluminum matrix composites and finite element simulation
63. Microstructure and properties of FeCoNiCrMn and Al2O3 hybrid particle-reinforced aluminum matrix composites fabricated by microwave sintering10.1016/j.jmrt.2023.05.100 ↗
64. Evolution of microstructure and mechanical properties of aluminum matrix composites reinforced with dual-phase heterostructures10.1016/j.msea.2024.146500 ↗
65. Interface regulation strategy of Al-CNTs composite induced by Al-Si eutectic reaction and its strengthening mechanism10.1016/j.jmst.2022.11.041 ↗
66. Enhanced grain refinement and mechanical properties of AZ91 alloy by a novel Al-5.1V-2.3B refiner containing VB2 and VB particles10.1016/j.matdes.2022.111474 ↗
67. Synthesis of TiB2 from a carbon-coated precursors method10.1111/jace.14794 ↗
68. Microstructure, tensile properties, and wear resistance of in situ TiB2/6061 composites prepared by high energy ball milling and stir casting10.1007/s11665-021-05964-1 ↗
69. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
70. Microstructure evolution and strengthening mechanisms in friction-stir welded Al-Mg-Sc alloy10.1016/j.msea.2019.138540 ↗
71. Enhanced strength-plasticity combination in an Al-Cu-Mg alloy—atomic scale microstructure regulation and strengthening mechanisms10.1016/j.msea.2020.139447 ↗
72. Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation10.1016/j.msea.2019.03.028 ↗
73. An improved modelling framework for strength and work hardening of precipitate strengthened Al-Mg-Si alloys10.1016/j.msea.2021.142500 ↗
74. Microstructure evolution and mechanical behavior of a binary Al-7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
75. The dislocation-twin interaction and evolution of twin boundary in AZ31 Mg alloy10.1016/j.actamat.2017.05.034 ↗
76. In situ observation of twin boundary formation at grain-boundary groove during directional solidification of Si10.1016/j.scriptamat.2017.02.028 ↗
77. Dislocation induced twin growth and formation of basal stacking faults in [1] twins in pure Mg10.1016/j.actamat.2018.12.003 ↗
78. Evolution of dislocations and twins in a strong and ductile nanotwinned steel10.1016/j.actamat.2016.03.057 ↗
79. Interplay between dislocation type and local structure in dislocation-twin boundary reactions in Cu
80. Grain refinement of aluminum and aluminum alloys by Sc and Zr10.3390/met13040751 ↗
81. Mechanical properties of cold-rolled and annealed Al-12% Mg alloy sheet with high Mg solid solubility fabricated from vertical-type high-speed twin-roll cast strip10.2320/matertrans.F-M2019850 ↗
82. Correlation of microstructure with mechanical properties and fracture toughness of A356 aluminum alloys fabricated by low-pressure-casting, rheo-casting, and casting-forging processes10.1016/j.engfracmech.2008.04.004 ↗
83. Effect of La addition on microstructure and mechanical properties of hypoeutectic Al-7Si aluminum alloy10.1007/s41230-021-0137-4 ↗
84. Effect of slow shot speed on externally solidified crystal, porosity and tensile property in a newly developed high-pressure die-cast Al-Si alloy10.1007/s41230-023-3037-y ↗
85. Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology10.1016/j.jmst.2018.12.005 ↗