journal article·2025-05Open access

Ultrahigh strength in Ti-Fe-Sn-Nb alloys through short-range chemical and topological ordering

D.V. Louzguine-Luzgin, M. Okugawa, A.K.A. Lu, Yu.P. Ivanov, A.L. Greer

Abstract

Alloys with a stabilized β-titanium structure and high concentrations of late transition metals, especially Fe, exhibit exceptionally high mechanical strength exceeding 2 GPa and good biocompatibility but often suffer from insufficient ductility in tension. At the same time, the β-Ti phase in such alloys is sufficiently stabilized to prevent decomposition into ω-phase nanoparticles , which are typically responsible for mechanical embrittlement in Ti alloys. In this study, the atomic structure of a high-strength Ti 82 Fe 12 Sn 3 Nb 3 alloy is examined using high-resolution analytical transmission electron microscopy (TEM). We demonstrate that the high strength of these alloys is achieved primarily because dislocation glide in the supersaturated β-Ti solid solution is hindered by the nanoscale local ordering of iron atoms in the atomic lattice and the formation of solute-enriched clusters. These locally chemically ordered clusters, akin to Guinier-Preston zones and undetectable even by high-resolution TEM, precede the decomposition of β-Ti via ω-phase formation or eutectoid decomposition. This concept is proposed to be general in nature and may apply to other Ti alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A review of metastable beta titanium alloys10.3390/met8070506 ↗
2. High-strength titanium-based alloy for low-temperature superplastic forming10.1007/s11661-020-06058-8 ↗
3. Recent advances and prospects in β-type titanium alloys for dental implants applications10.1021/acsbiomaterials.4c00963 ↗
4. Recent advances in the design of novel β-titanium alloys using integrated theory, computer simulation, and advanced characterization10.1002/adem.202100152 ↗
5. 2004 · 22
6. High-strength Ti-based alloys containing Fe as one of the main alloying elements10.2320/matertrans.M2018114 ↗
7. Phase evolution and mechanical properties of suction cast Ti–Fe–Co ternary alloys10.1007/s12666-017-1174-y ↗
8. Mechanical properties and microstructures of cast dental Ti-Fe alloys10.4012/dmj.2019-254 ↗
9. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
10. Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing – a new candidate for high temperature applications
11. High strength beta titanium alloys: new design approach10.1016/j.msea.2015.01.073 ↗
12. Heat treatment and mechanical properties of Ti-Fe alloys10.1007/BF03377721 ↗
13. Martensitic transformation and metastable β-phase in binary titanium alloys with d-metals of 4-6 periods
14. Electrochemical behavior and biocompatibility of Ti-Fe-Cu alloy with high strength and ductility10.1016/j.jallcom.2016.11.213 ↗
15. Influences of additional alloying elements (V, Ni, Cu, Sn, B) on structure and mechanical properties of high-strength hypereutectic Ti–Fe–Co bulk alloys10.1016/j.intermet.2005.06.002 ↗
16. The rapidly solidified b-type Ti-Fe-Sn alloys with high specific strength and low elastic modulus10.1016/j.jallcom.2019.01.346 ↗
17. High strength Ti–Fe–Sn ultrafine composites with large plasticity10.1016/j.scriptamat.2007.03.031 ↗
18. High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure10.1088/1742-6596/240/1/012103 ↗
19. An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic β Ti-Fe-Nb-Sn composite for implants10.1016/j.surfcoat.2017.08.035 ↗
20. A review on alloy composition and synthesis of β-Titanium alloys for biomedical applications
21. Mechanical behavior and tensile/compressive strength asymmetry of ultrafine structured Ti-Nb-Ni-Co-Al alloys with bi-modal grain size distribution10.1016/j.matdes.2014.05.007 ↗
22. Favorable microstructural modulation and enhancement of mechanical properties of Ti–Fe–Nb ultrafine composites10.1080/09500830903236020 ↗
23. Sn and Nb modified ultrafine Ti-based bulk alloys with high-strength and enhanced ductility10.1063/1.4792592 ↗
24. High-strength bimodal ultrafine Ti-based alloys with enhanced ductility10.1002/crat.201400035 ↗
25. Ti-Fe-Sn-Nb hypoeutectic alloys with superb yield strength and significant strain-hardening10.1016/j.scriptamat.2017.03.033 ↗
26. New beta-type Ti-Fe-Sn-Nb alloys with superior mechanical strength10.1016/j.msea.2017.08.060 ↗
27. Modelling strengthening mechanisms in beta-type Ti alloys10.1016/j.msea.2019.04.027 ↗
28. Alloy design by tailoring phase stability in commercial Ti alloys10.1016/j.msea.2021.141229 ↗
29. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
30. Review - phase transitions in Ti alloys driven by the high pressure torsion10.2320/matertrans.MT-MF2022044 ↗
31. A binary beta titanium superalloy containing ordered-beta TiFe, alpha and omega10.1016/j.scriptamat.2021.113905 ↗
32. The effect of omega phase on the mechanical properties of titanium alloys10.1007/BF02913423 ↗
33. An X-ray examination of the to phase in TiV, TiMo and TiCr alloys10.1016/0001-6160(58)90111-1 ↗
34. A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties10.1080/09506608.2022.2036401 ↗
35. Phase transformations in Ti–Fe alloys induced by high-pressure torsion10.1002/adem.201500143 ↗
36. The α→ω and β→ω phase transformations in Ti-Fe alloys under high-pressure torsion10.1016/j.actamat.2017.10.051 ↗
37. Metastable phases of electron type in titanium alloys with 3d-metals10.1007/s11041-006-0111-1 ↗
38. Electron microscopic study of Cr-Ti alloys10.1016/0921-5093(91)90145-D ↗
39. An electron diffraction investigation of the diffuse ω structure in quenched Ti-3d transition metal alloys10.1016/0956-7151(94)90141-4 ↗
40. 2004 · 4
41. The omega phase transformation in titanium alloys as an example of displacement controlled reactions10.1016/0001-6160(71)90047-2 ↗
42. Composition-dependent microstructure-property relationships of Fe and Al modified Ti-12Cr (wt%)10.1007/s11837-019-03467-y ↗
43. Minor additions of Sn suppress the omega phase formation in beta titanium alloys10.1016/j.actamat.2023.119466 ↗
44. 2004 · 13
45. Thermomechanical processing of beta titanium alloys–an overview10.1016/S0921-5093(97)00783-1 ↗
46. Formation of nanocrystalline nuclei in the amorphous phase of Ge55Al30Cr10Y5 alloy10.1016/S0167-577X(99)00008-7 ↗
47. Coupled experimental and computational investigation of omega phase evolution in a high misfit titanium-vanadium alloy10.1016/j.actamat.2017.03.047 ↗
48. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
49. Origin of large plasticity in Fe-based bulk metallic glasses10.1038/s41467-018-03744-5 ↗
50. Short-range ordering mechanics in FCC materials10.1016/j.ijplas.2024.103919 ↗
51. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
52. Short-range ordering and its effects on mechanical properties of high-entropy alloys10.1016/j.jmst.2020.06.018 ↗
53. Mechanically derived short-range order and its impact on the multi-principal-element alloys10.1038/s41467-022-34470-8 ↗
54. Short-range order (SRO) and its effect on the primary creep behavior of a Ti–6wt%Al alloy10.1016/S0921-5093(01)01045-0 ↗
55. Omega-like diffuse X-ray scattering in Ti–V caused by static lattice distortions10.1016/j.actamat.2007.11.015 ↗
56. Direct imaging of short-range order and its impact on deformation in Ti-6Al10.1126/sciadv.aax2799 ↗
57. Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid10.1016/j.matdes.2018.07.013 ↗