journal article·2025-05Open access

Laser processing of a CuTiZr-based alloy by powder bed fusion: From bulk metallic glass to metallic glass composite

Aleksandr M. Filimonov, K.M. Saiful Alam, Askar R. Kvaratskheliya, Tim Grieb, Binkal Kumar Sharma, Bruno Bianchini, Rafael Formenton Macedo dos Santos, Leonardo Fernandes Gomes, Andreas Rosenauer, Piter Gargarella, Nattamon Suwannaharn, Taisuke T. Sasaki, Lutz Mädler, Ilya V. Okulov

Abstract

Additive manufacturing of bulk metallic glasses using laser powder bed fusion is a challenging task, even for materials with a high glass-forming ability. This is due to the complex thermal history of the additively manufactured glass-forming materials, which are repeatedly heated upon laser processing of subsequent layers, leading to their devitrification. In this study, the influence of laser processing on the commercial Cu-based metallic glass AMLOY-CU01, having a reduced glass transition temperature T rg ∼0.44, has been systematically explored, incorporating high-energy synchrotron X-ray diffraction studies complemented by transmission electron microscopy. Despite the low T rg , both vitrified and devitrified states can be obtained. The findings reveal that phase composition is weakly correlated with porosity in the keyhole regime but shows a strong correlation in the lack of fusion regime. The stabilization of the nearly glassy state of the metallic glass is achieved within a laser energy density range of 11 J mm −3 ≤ e ≤ 25 J mm −3 and a normalized enthalpy range of 92 ≤ Δ H ≤ 239, correlating with moderate porosity values in the obtained samples. The current results provide insights into the fundamental understanding of phase formation in glass-forming materials synthesized by laser processing and pave the way for their engineering application. • The different phase composition can be controlled through the process conditions. • The thermal history determines the phase formation in the glass-forming alloy. • The porosity contributes to the stabilization of crystalline phases near the pores.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Additive Manufacturing Materials and Processes · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Bulk metallic glasses — a new engineering material10.1016/S1359-0286(96)80029-5 ↗
2. Processing of bulk metallic glass10.1002/adma.200902776 ↗
3. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
4. Mechanical behavior of emerging materials10.1016/S1369-7021(12)70218-3 ↗
5. Bulk metallic glasses as structural materials: a review10.1002/adem.201600066 ↗
6. Manufacturing of metallic glass components: processes, structures and properties10.1016/j.pmatsci.2024.101283 ↗
7. Identification of the metallic glass state
8. The glassy state of matter: its definition and ultimate fate10.1016/j.jnoncrysol.2017.05.019 ↗
9. Non-crystalline solids: glasses and amorphous solids10.1016/0022-3093(95)00502-1 ↗
10. Formation of Ti-Zr-Cu-Ni bulk metallic glasses10.1063/1.360537 ↗
11. Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites10.1016/j.jallcom.2017.08.120 ↗
12. Crystallization of Cu60Zr20Ti20 bulk metallic glass by high pressure torsion10.1515/rams-2019-0037 ↗
13. Thermoplastic micro-forming of bulk metallic glasses: a review10.1007/s11837-016-1844-y ↗
14. Thermoplasticity of metallic glasses: processing and applications10.1016/j.pmatsci.2022.100941 ↗
15. Preparation of Zr-based metallic glass nanowires and nanoparticles by selective etching10.1016/j.scriptamat.2007.07.032 ↗
16. New nickel-based bulk metallic glasses with extremely high nickel content10.1016/j.jallcom.2009.09.016 ↗
17. Phase formation and mechanical properties of Ti-Cu-Ni-Zr bulk metallic glass composites10.1016/j.actamat.2013.10.068 ↗
18. Gibson · 2015
19. Enhanced mechanical properties of additively manufactured bulk metallic glasses produced through laser foil printing from continuous sheetmetal feedstock
20. Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion
21. Selective laser melting of a Ti-based bulk metallic glass10.1016/j.matlet.2017.10.130 ↗
22. Additive manufacturing of bulk metallic glasses—process, challenges and properties: A review10.3390/met11081279 ↗
23. Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review10.1007/s00170-021-07990-8 ↗
24. 3D printing of bulk metallic glasses10.1016/j.mser.2021.100625 ↗
25. Controlling the glassy state toward structural and mechanical enhancement: additive manufacturing of bulk metallic glass using advanced laser beam shaping technology
27. Laser deposition of a Cu-based metallic glass powder on a Zr-based glass substrate10.1557/JMR.2008.0329 ↗
28. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
29. The role of a low-energy-density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting10.1016/j.matdes.2014.06.022 ↗
30. Structural and mechanical characteristics of Cu50Zr43Al7 bulk metallic glass fabricated by selective laser melting10.3390/ma12050775 ↗
31. Influence of Processing Route on the Surface Reactivity of Cu47Ti33Zr11Ni6Sn2Si1 Metallic Glass10.3390/met11081173 ↗
32. Laser powder bed fusion of Cu-Ti-Zr-Ni bulk metallic glasses in the Vit101 alloy system
33. Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content10.1016/j.matdes.2024.112744 ↗
34. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
35. Investigation of scanning strategies and laser remelting effects on top surface deformation of additively manufactured IN 62510.3390/ma15093198 ↗
36. A comprehensive comparison of the Analytical and numerical prediction of the thermal history and solidification microstructure of Inconel 718 products made by laser powder-bed fusion10.1016/J.ENG.2017.05.023 ↗
37. Semi-analytical and experimental heat input study of additively manufactured Zr-based bulk metallic glass: insights into nano- and global-scale relaxation and crystallization
38. A simple methodology for predicting laser-weld properties from material and laser parameters10.1088/0022-3727/44/44/445401 ↗
39. Scaling laws for the additive manufacturing10.1016/j.jmatprotec.2018.02.034 ↗
40. Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process
41. Systematic approach to process parameter optimization for laser powder bed fusion of low-alloy steel based on melting modes10.1007/s00170-023-11377-2 ↗
42. Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion10.1016/j.jallcom.2023.168946 ↗
43. How to control the crystallization of metallic glasses during laser powder bed fusion? Towards part-specific 3D printing of in situ composites
44. Synthesis and characterization of Fe-based amorphous composite by laser direct deposition10.1016/j.surfcoat.2013.11.013 ↗
45. Additive manufacturing of a precious bulk metallic glass
46. Laser solid forming Zr-based bulk metallic glass10.1016/j.intermet.2011.10.008 ↗
47. Selective laser melting of crack-free Fe-based bulk metallic glass via chessboard scanning strategy10.1016/j.matlet.2020.127824 ↗
48. On the fragility of Cu47Ti33Zr11Ni8Si1 metallic glass10.1088/0022-3727/39/12/020 ↗
49. Porosity measurements and analysis for metal additive manufacturing process control10.6028/jres.119.019 ↗
50. Scanning optical microscopy for porosity quantification of additively manufactured components
51. A modified volumetric energy density-based approach for porosity assessment in additive manufacturing process design10.1007/s00170-020-05949-9 ↗
52. Mechanism of keyhole pore formation in metal additive manufacturing10.1038/s41524-022-00699-6 ↗
53. Thermodynamics of Cu47Ti34Zr11Ni8, Zr52.5Cu17.9Ni14.6Al10Ti5 and Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloys10.1063/1.372975 ↗
54. Thermal conductivity of metallic glassy alloys and its relationship to the glass forming ability and the observed cooling rates10.1557/JMR.2008.0286 ↗
55. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry10.1016/j.jmatprotec.2021.117130 ↗
56. Absorbance study of powder conditions for laser additive manufacturing10.1016/j.matdes.2022.110591 ↗
57. Selective laser melting of CuZr-based metallic glass composites10.1016/j.matlet.2019.126724 ↗
58. Critical cooling rates for amorphous-to-ordered complexion transitions in Cu-rich nanocrystalline alloys10.1016/j.actamat.2021.116650 ↗
59. In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing10.1016/j.matdes.2017.09.044 ↗
60. Fabrication of metastable crystalline nanocomposites by flash annealing of Cu47.5Zr47.5Al5 metallic glass using joule heating10.3390/nano10010084 ↗
61. Thermodynamic assessment of the Cu-Ti-Zr system10.1016/S0925-8388(02)01035-6 ↗
62. Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element10.2320/matertrans.46.2817 ↗
63. Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses10.1016/j.msea.2006.07.141 ↗
64. Dynamic crystallization process in a supercooled liquid region of Cu40Ti30Ni15Zr10Sn5 amorphous alloy10.1016/S0022-3093(99)00661-4 ↗
65. Quantifying the origin of metallic glass formation10.1038/ncomms10313 ↗
66. Flash Joule heating for ductilization of metallic glasses10.1038/ncomms8932 ↗
67. Rappaz · 2009
68. Gottstein · Phys. Found. Mater. Sci. · 200410.1007/978-3-662-09291-0 ↗
69. Improvement of glass-forming ability and phase separation in Cu-Ti-rich Cu-Ti-Zr-Ni-Si bulk metallic glasses10.1016/j.jallcom.2010.04.129 ↗
70. Microstructural evolution of slowly solidified Cu-Ti-Zr-Ni amorphous alloy10.1016/j.jnoncrysol.2010.12.043 ↗
71. Virtual development of process parameters for bulk metallic glass formation in laser-based powder bed fusion10.3390/ma15020450 ↗
72. N. Ciftci, Cooling strategies for the atomization of glass-forming alloys, PHD Thesis(June) 153.10.26092/elib/84.
73. Fabrication of Fe-based bulk metallic glass by selective laser melting: a parameter study10.1016/j.matdes.2015.07.145 ↗
74. Fabrication and characterization of Fe-based metallic glasses by selective laser melting10.1016/j.optlastec.2018.07.059 ↗