journal article·2025-04Open access

Countering voltage fade and capacity decay of Li-rich layered oxides endowed by a hydridoaluminate additive

Shujun Qiu, Longde Duan, Errui Wang, Jiaxiao Meng, Fen Xu, Lixian Sun, Hailiang Chu

Abstract

The development of cathode materials exhibiting high capacity and superior cycling performance plays a pivotal role in enhancing the energy density of lithium-ion batteries (LIBs). In this context, lithium-rich layered oxides (LLOs) have emerged as leading candidates among cathode materials owing to their exceptionally high specific capacities. However, prolonged cycling induces the detrimental interfacial reactions between LLOs and electrolytes, leading to oxygen release, transition metal dissolution, and structural microcracks, collectively driving progressive voltage fade and capacity deterioration. In this study, lithium tri(tert-butoxy)hydridoaluminate (LTBA) was employed as a functional electrolyte additive to optimize the electrochemical performance of a model Li-rich layered oxide cathode (Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 , denoted as LMNCO). Remarkably, the LTBA-modified LMNCO exhibited a capacity retention of 83.6 % after 300 cycles at 1 C, significantly outperforming the bare electrolyte system (only 45.6 % retention). Notably, the voltage fade in LTBA-modified electrolyte was attenuated to 1.31 mV per cycle, representing a 39.4 % reduction compared to conventional electrolyte (2.16 mV per cycle). The experimental results indicate that the LTBA additive in electrolyte acts as an HF scavenger and moderate reducing agent, preventing transition metals from dissolving in the LMNCO cathode.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Harnessing hydrogen spillover by lattice strain for enhanced photocatalytic hydrogen evolution of ZnIn2S410.1021/acscatal.4c07308 ↗
2. Rational design of bismuth based photocatalysts for solar energy conversion10.3866/PKU.WHXB202405016 ↗
3. Chalcogenide-based S-scheme heterojunction photocatalysts10.1016/S1872-2067(24)60072-0 ↗
4. Structurally robust lithium-rich layered oxides for high-energy and long-lasting cathodes10.1038/s41467-024-45490-x ↗
5. Al/Ti synergistic doping enhanced cycle stability of Li-rich layered oxides10.1002/adfm.202201744 ↗
6. Activation of oxygen redox by inhibited dynamic phase transition for high-energy Li-rich layered oxide cathode10.1016/j.cej.2024.153122 ↗
7. Composite nanostructure construction on the grain surface of Li-rich layered oxides10.1002/adma.201906070 ↗
8. Organic carbon gel assisted-synthesis of Li1.2Mn0.6Ni0.2O2 for a high-performance cathode material for Li-ion batteries10.1039/C6RA26077B ↗
9. Li1.2Mn0.6Ni0.2O2 with 3D porous rod-like hierarchical micro/nanostructure for high-performance cathode material10.1016/j.jallcom.2019.03.282 ↗
10. Revealing proton-coupled exchange mechanism in aqueous ion-exchange synthesis of nickel-rich layered cathodes for lithium-ion batteries10.1016/j.esci.2024.100229 ↗
11. Advances on defect engineering of niobium pentoxide for electrochemical energy storage10.1002/smll.202410211 ↗
12. Stabilizing oxygen by high-valance element doping for high-performance Li-rich layered oxides10.1002/bte2.20220030 ↗
13. Review on the synthesis of Li-rich layered oxide cathodes10.1039/D4TA03917C ↗
14. Enhanced electrochemical properties of sodium-doped lithium-rich manganese-based cathode materials
15. Mitigating chain degradation of lithium-rich manganese-based cathode material by surface engineering
16. Unraveling 3d transition metal (Ni, Co, Mn, Fe, Cr, V) ions migration in layered oxide cathodes: a pathway to superior Li-ion and Na-ion battery cathodes
17. Stable surface lattice for prolonged cycle life of single-crystal lithium-rich layered oxide cathodes10.1016/j.cej.2024.151257 ↗
18. A cable-stayed honeycomb superstructure to improve the stability of Li-rich materials via inhibiting interlaminar lattice strain10.1002/adma.202404982 ↗
19. Quenching-induced lattice modifications endowing Li-rich layered cathodes with ultralow voltage decay and long life10.1039/D4EE02511C ↗
20. Bulk/Interfacial structure design of Li-rich Mn-based cathodes for all-solid-state lithium batteries10.1021/jacs.4c08115 ↗
21. Mg/V co-doping induced functional surface-disordered phase to improve the stability and kinetics of Li-rich manganese-based cathode
22. Elements gradient doping in Mn-based Li-rich layered oxides for long-life lithium-ion batteries10.1016/j.jmst.2024.04.066 ↗
23. Multifunctional surface-integrated structures enabling layered oxide cathodes with stable high-voltage cycling10.1021/acsenergylett.4c01719 ↗
24. Advanced TiO2/Al2O3 bilayer ALD coatings for improved lithium-rich layered oxide electrodes10.1021/acsami.3c16948 ↗
25. Enhancing cycling stability in Li-rich layered oxides by atomic layer deposition of LiNbO3 nanolayers10.1016/j.ssi.2024.116727 ↗
26. Lattice-compatible piezoelectric modification for suppressing lattice oxygen evolution of Ni-rich cathode materials at high cut-off voltage
27. Bifunctional modulation of Li-rich layered oxide cathode material via W-modification for improved electrochemical performance
28. Low-temperature tolerant lithium-rich manganese-based cathode enabled by facile SnO2 decoration10.1039/D4TA01971G ↗
29. Constructing oxygen-deficient shell on Li-rich cathodes by spark plasma sintering for high-performance lithium-ion batteries, Next
30. Lattice engineering toward extraordinary structural stability of high-performance single-crystal Li-rich layered oxides cathodes10.1002/adfm.202407692 ↗
31. Regulating the multiscale stability of Li-rich cathode through lewis acid gas treatment10.1002/adfm.202406947 ↗
32. Exceptional rate performances of Li-rich Mn-based cathodes enabled by boron-based additives-driven self-optimized interface10.1021/acs.nanolett.4c01104 ↗
33. Application of a cost-effective boron-based electrolyte additive in high-voltage lithium metal battery10.1016/j.est.2025.115596 ↗
34. Two-in-one strategy: discretely functionalized electrolyte additive for stable lithium metal batteries coupled with Ni-rich cathode
35. Elucidating the limit of lithium difluorophosphate electrolyte additive for high-voltage Li/Mn-rich layered oxide || graphite Li ion batteries10.1002/eem2.12835 ↗
36. In situ construction of uniform and robust cathode–electrolyte interphase for Li-rich layered oxides10.1002/adfm.202009192 ↗
37. Rational design of vinylene carbonate-inspired 1,3-dimethyl-1H-imidazol-2(3H)-one additives to stabilize high-voltage lithium metal batteries
38. Dimethyl sulfide electrolyte additive enabled high-voltage lithium-ion battery10.1021/acsenergylett.4c00519 ↗
39. Tuning the interface stability of nickel-rich NCM cathode against aggressive structural collapse via the synergistic effect of additives10.1021/acs.inorgchem.4c00269 ↗
40. Charge-storage performance of Li/LiFePO4 cells with additive-incorporated ionic liquid electrolytes at various temperatures10.1016/j.jpowsour.2014.02.085 ↗
41. Constructing matching cathode–anode interphases with improved chemo-mechanical stability for high-energy batteries10.1021/acsnano.3c12823 ↗
42. A hydridoaluminate additive producing a protective coating on Ni-rich cathode materials in lithium-ion batteries10.1002/aenm.202402051 ↗
43. Stabilizing Li-rich layered oxide cathode interface by using silicon-based electrolyte additive10.1016/j.jcis.2024.02.010 ↗
44. Vinyltrimethylsilane as a novel electrolyte additive for improving interfacial stability of Li-rich cathode working in high voltage10.1016/j.cclet.2023.108649 ↗
45. High-energy ‘composite’ layered manganese-rich cathode materials via controlling Li2MnO3 phase activation for lithium-ion batteries10.1039/c2cp40745k ↗
46. Multiple-functional LiTi2(PO4)3 modification improving long-term performances of Li-rich Mn-based cathode material for advanced lithium-ion batteries10.1016/j.jpowsour.2024.234870 ↗
47. Investigation of structures and electrochemical performances of synergetic ZnO-Al2O3 nanolaminated coatings for Li-rich layered oxide cathodes10.1016/j.est.2024.114331 ↗
48. Boosting cationic and anionic redox activity of Li-rich layered oxide cathodes via Li/Ni disordered regulation10.1016/j.jechem.2024.09.015 ↗
49. Voltage fade of layered oxides: Its measurement and impact on energy density10.1149/2.034311jes ↗
50. Compatibility between lithium difluoro (oxalate) borate-based electrolytes and Li1.2Mn0.54Ni0.13Co0.13O2 cathode for lithium-ion batteries10.1016/j.jelechem.2018.07.019 ↗
51. Electrochemical kinetics of the 0.5Li2MnO3·0.5LiMn0.42Ni0.42Co0.16O2 ‘composite’ layered cathode material for lithium-ion batteries10.1039/c2ra20772a ↗
52. Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS10.1016/j.electacta.2011.02.119 ↗
53. Analysis of the galvanostatic intermittent titration technique (GITT) as applied to a lithium-ion porous electrode10.1016/j.jpowsour.2008.09.045 ↗
54. Li-ion kinetics and polarization effect on the electrochemical performance of Li(Ni1/2Mn1/2)O210.1016/S0013-4686(03)00964-2 ↗
55. Electrochemical kinetics of the Li[Li0.23Co0.3Mn0.47]O2 cathode material studied by GITT and EIS10.1021/jp1088788 ↗
56. Polyethylene glycol-assisted synthesis of hierarchically porous layered lithium-rich oxide as cathode of lithium ion battery10.1016/j.jpowsour.2015.01.004 ↗
57. Surface-functionalized coating for lithium-rich cathode material to achieve ultra-high rate and excellent cycle performance10.1021/acsnano.9b05960 ↗
58. Pentafluorophenyl diethoxy phosphate: an electrolyte additive for high-voltage cathodes of lithium-ion batteries10.1016/j.est.2024.111364 ↗
59. Aminoalkyldisiloxane as effective electrolyte additive for improving high temperature cycle life of nickel-rich LiNi0.6Co0.2Mn0.2O2/graphite batteries10.1016/j.jpowsour.2020.228099 ↗
60. NaH2PO4 as an electrolyte additive for enhanced thermal stability of LiNi0.8Co0.1Mn0.1O2/graphite batteries10.1149/1945-7111/abb566 ↗
61. Mitigating Li-rich layered cathode capacity loss by using a siloxane electrolyte additive10.1021/acsami.4c15211 ↗
62. Tris(trimethylsilyl)borate as multifunctional additive for Li-rich layered oxide-based batteries10.1016/j.est.2025.115553 ↗
63. Tunable and robust phosphite-derived surface film to protect lithium-rich cathodes in lithium-ion batteries10.1021/acsami.5b01770 ↗