Microstructure evolution and mechanical properties of Ti-6Al-4V alloy prepared by fused filament fabrication
Source abstract
Abstract
The Ti-6Al-4V alloy may significantly reduce production costs by Fused filament fabrication (FFF) technology. However, this technique may give rise to metallurgical defects, such as pores, which can notably reduce the mechanical properties of Ti-6Al-4V alloy. Hence, the study probed into the influence of different process parameters on the microstructure and mechanical properties of Ti-6Al-4V alloy.Firstly, the optimum parameters were obtained, including printing speed of 40 mm/s, the raster width of 0.5 mm, layer thickness of 0.1 mm, and extrusion temperature of 190 °C. Furthermore, the as-fabricated parts exhibited maximum tensile and compressive strengths of 896.87 MPa and 1494.16 MPa. After sintering, the microstructure of Ti-6Al-4V displayed a distinct basketweave pattern composed of an interconnected network of β-phase, lamellar α-phase and pores. Finally, this paper discussed the effect of process parameters on pores. The layer thickness had the most notable impact on the pores, with raster width coming in second. Reducing layer thickness reduced pores by improving the connection between layers. The raster width has a significant effect on part density, as it influences the dimensions of inter-filament pores.A wider rating width results in an increase in inter-filament pores.The results of this study can be used to develop a strategic method for optimizing the printing process of various materials for reducing pores and improving material properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Mechanical property of FDM printed ABS: influence of printing parameters10.1007/s00170-019-03313-0 ↗
2. Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting10.1016/j.msea.2021.142108 ↗
3. Support optimization for additive manufacturing: application to FDM10.1108/RPJ-04-2016-0055 ↗
4. Effect of fabrication parameters on surface roughness of FDM parts10.1007/s12541-018-0016-0 ↗
5. Effect of multi-infill patterns on tensile behavior of FDM printed parts10.1007/s40430-020-02742-3 ↗
6. Cork–PLA composite filaments for fused deposition modelling10.1016/j.compscitech.2018.10.008 ↗
7. Effect of FDM infill patterns on mechanical properties10.1016/j.polymertesting.2022.107654 ↗
8. A novel hybrid additive manufacturing methodology for the development of Ti6Al4V parts
9. Fused deposition modelling: a review10.1108/RPJ-04-2019-0106 ↗
10. Experimental investigation of FDM manufacturing of 316 l stainless steel10.1007/s00170-024-14602-8 ↗
11. Nylon 12 composite optimization: Investigating influence of ceramic functional fillers on FFF 3D printing performance and rheological properties10.1002/pc.28684 ↗
12. Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: perspective and prospects
13. A comparative study of artificial neural network and regression model for hybrid additive manufacturing of Ti6Al4V parts and microstructural analysis10.1007/s11665-024-09862-0 ↗
14. Torsion analysis of the anisotropic behavior of FDM technology10.1007/s00170-018-1602-0 ↗
15. Synthesis and properties of modified PBT for FDM10.1108/RPJ-12-2015-0197 ↗
16. Healing simulation for bond strength prediction of FDM10.1108/RPJ-03-2016-0051 ↗
17. 3D inkjet printing of biomaterials with strength reliability and cytocompatibility: quantitative process strategy for Ti-6Al-4V10.1016/j.biomaterials.2019.05.023 ↗
18. Toward a better understanding of the fused deposition modeling process: comparison with injection molding10.1089/3dp.2017.0060 ↗
19. Deposition of biocompatible polymers by 3D printing (FDM) on titanium alloy10.3390/polym14020235 ↗
20. Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges10.1016/j.pmatsci.2020.100707 ↗
21. Optimising large-area crystal orientation mapping of nanoscale β phase in α+β titanium alloys using EBSD10.1016/j.matchar.2022.112371 ↗
22. EBSD analysis of grain-refinement mechanisms operating during equal-channel angular pressing of commercial-purity titanium10.1016/j.actamat.2019.05.014 ↗
23. A review of melt extrusion additive manufacturing processes: I. Process design and modeling10.1108/RPJ-01-2013-0012 ↗
24. Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review10.1007/s40964-021-00250-x ↗
25. Metal injection molding (MIM) of titanium and titanium alloys10.1016/B978-0-08-102152-1.00023-4 ↗
26. Density variation in binder jetting 3D-printed and sintered Ti-6Al-4V
27. Study of NiAl-based alloy parts produced by metal injection moulding10.1080/00325899.2021.1928996 ↗
28. Mechanical properties variation of samples fabricated by fused deposition additive manufacturing as a function of filler percentage and structure for different plastics10.1038/s41598-024-79213-5 ↗
29. Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite10.1002/pen.26900 ↗
30. Enhancing shear strength in 3D printed single lap composite joints: a multi-faceted exploration of GNP integration, print orientation, utilizing artificial neural networks, and dynamic analysis10.1002/app.55469 ↗
31. Effects of fused filament fabrication (FFF) process parameters on tensile and flexural properties of ABS/PLA multi-material10.1007/s40430-024-05189-y ↗
32. Investigation of an optimal material addition rate for energy consumption and dimensional accuracy in fused filament fabrication of CFR-PEEK10.3390/polym16040492 ↗
33. Effect of process parameter on tensile properties of FDM printed PLA
34. A pilot-study on the influence of fused filament fabrication (FFF) parameters on multiple performance metrics
35. Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method10.1007/s00170-016-9263-3 ↗
36. Interactions of polymeric components in a POM-based binder system for titanium metal injection moulding feedstocks10.1080/00325899.2023.2194478 ↗
37. Post-processing of FDM parts to improve surface and thermal properties10.1108/RPJ-12-2016-0207 ↗
38. Optimization of key quality indicators in material extrusion 3D printing of acrylonitrile butadiene styrene: the impact of critical process control parameters on the surface roughness, dimensional accuracy, and porosity
39. 3D printing of silk powder by Binder Jetting technique
40. High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulations
41. Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing10.1016/j.matdes.2018.06.038 ↗
42. Supersolidus liquid phase sintering of water-atomized low-alloy steel in binder jetting additive manufacturing10.1016/j.heliyon.2023.e13882 ↗
43. Binder jetting of ceramics: powders, binders, printing parameters, equipment, and post-treatment10.1016/j.ceramint.2019.04.012 ↗