Optimization in strength-ductility synergy of extruded Mg-3Sn-2Al-1Zn-0.6Y-0.6Nd alloy via novel FPE processes
Source abstract
Abstract
Three novel FPE processes were proposed by integrating the advantages of conventional extrusion and ECAE, optimizing the strength-ductility synergy of extruded Mg-3Sn-2Al-1Zn-0.6Y-0.6Nd alloy. The deformation mechanism, evolution of texture and variation of the tensile properties of the alloy were investigated. Findings indicate that the alloys fabricated by the FPE processes exhibit a finer and more uniform microstructure with the lowest dislocation density, undergoing the most complete DRX. The FPE process breaks the strength-ductility tradeoff dilemma of the magnesium alloys, achieving a synergistic enhancement of both strength and ductility. The FPE-105 process was determined to be the best process for strengthening the alloy, with a 24.4 % (340 MPa) increase in UTS compared to the FE-10 sample, along with an impressive doubling of the ductility (18.6 %). The excellent mechanical properties provided by the FPE-105 process are primarily stem from the uniform and fine grain distribution and texture modification. The successful application of the three FPE processes to the fabrication of extruded magnesium alloys demonstrates that the series of novel extrusion processes can be further optimized to create magnesium alloys with excellent strength-ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Anisotropy of wrought magnesium alloys: a focused overview10.1016/j.jma.2022.03.006 ↗
2. Simple shear extrusion versus equal channel angular pressing: a comparative study on the microstructure and mechanical properties of an Mg alloy10.1016/j.jma.2023.05.006 ↗
3. Characterization of hot extrusion deformation behavior, texture evolution, and mechanical properties of Mg-5Li-3Sn-2Al-1Zn magnesium alloy10.1016/j.msea.2022.144136 ↗
4. Towards the development of heat-treatable high-strength wrought Mg alloys10.1016/j.scriptamat.2010.01.038 ↗
5. Achieving exceptionally high strength in Mg-3Al-1Zn-0.3Mn extrusions via suppressing intergranular deformation10.1016/j.actamat.2018.08.045 ↗
6. Influences of pre-existing Mg17Al12 particles on static recrystallization behavior of Mg-Al-Zn alloys at different annealing temperatures10.1016/j.jallcom.2019.02.063 ↗
7. Substantial improvement in cold formability of concentrated Mg-Al-Zn-Ca alloy sheets by high temperature final rolling10.1016/j.actamat.2021.117328 ↗
8. Design of multicomponent Mg-Al-Zn-Sn-Bi alloys with refined microstructure and enhanced tensile properties10.1016/j.msea.2020.139696 ↗
9. Tailoring good combinations between strength and ductility in a novel Mg-5Sn-2Al-1Zn alloy via different hot extrusion
10. Eutectic intermetallic formation during solidification of a Mg-Sn-Al-Zn-Mn alloy10.1016/j.matchar.2022.111807 ↗
11. Strong and ductile heat-treatable Mg-Sn-Zn-Al wrought alloys10.1016/j.actamat.2015.06.060 ↗
12. Fabrication of exceptionally high-strength Mg-4Sm-0.6Zn-0.4Zr alloy via low-temperature extrusion10.1016/j.msea.2021.142565 ↗
13. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength10.1016/j.actamat.2018.03.002 ↗
14. Enhanced thermal conductivity and mechanical properties of extruded Mg-4La-2Al-0.3Mn alloy via hot forging10.1016/j.mtla.2024.102073 ↗
15. Effect of Zn addition combined a novel screw twist extrusion technology on the microstructure, texture as well as the ductility of Mg-xZn-1Mn alloys10.1016/j.jallcom.2024.173995 ↗
16. Simultaneous improvement in strength and ductility of extruded Mg alloy via novel closed forging extrusion10.1016/S1003-6326(22)65989-2 ↗
17. Forming novel texture and enhancing the formability in Mg-3Al-Zn alloy sheets fabricated by transverse gradient extrusion10.1016/j.jmrt.2022.03.165 ↗
18. A novel continues multi-shear extrusion process on the microstructure and mechanical property evolution of AZ31 magnesium alloys10.1016/j.jmrt.2023.11.190 ↗
19. Improving mechanical properties of AZ31 alloy sheets via novel turned-bearing extrusion by introducing shear strain10.1016/j.jmrt.2023.05.128 ↗
20. Unveiling the formation of gradient microstructure in the magnesium alloy sheet fabricated via turned-bearing extrusion10.1016/j.jmrt.2024.03.111 ↗
21. Microstructure evolution and mechanical properties of Mg94Sn3Al2Zn1 alloy under different extrusion processes10.1016/j.msea.2024.146834 ↗
22. Study on the strengthening mechanism of rare earth yttrium on magnesium alloys10.1016/j.msea.2022.143513 ↗
23. The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys10.1016/j.actamat.2017.02.044 ↗
24. Grain size effect on the thermally activated twin boundary migration in a zirconium alloy10.1016/j.msea.2018.03.118 ↗
25. Effect of unidirectional rolling and cross-rolling on microstructure and mechanical anisotropy of Mg-Gd-Y-Ag-Zr plates10.1016/j.jallcom.2023.170680 ↗
26. Polymorphism of dislocation core structures at the atomic scale
27. Evaluation of microstructure and tensile properties of Mg-5Zn-xZr-yCa alloys10.1016/j.msea.2023.145288 ↗
28. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
29. Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speed
30. Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging10.1016/j.jma.2021.01.001 ↗
31. Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments10.1016/j.jmrt.2022.07.019 ↗
32. Strength-ductility synergy in Mg98.3Y1.3Ni0.4 alloy processed by high temperature homogenization and rolling10.1016/j.scriptamat.2021.114345 ↗
33. Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg-3Gd alloy10.1016/j.jmst.2023.11.044 ↗
34. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
35. Mechanism of plasticity enhancement of AZ31B magnesium alloy sheet by accumulative alternating back extrusion10.1016/j.jma.2021.08.035 ↗
36. Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes10.1016/j.jmrt.2022.02.061 ↗
37. Microstructure characterization of LAE442 magnesium alloy processed by extrusion and ECAP10.1016/j.matchar.2015.12.002 ↗
38. Effect of effective strain gradient on texture and mechanical properties of Mg-3Al-1Zn alloy sheets produced by asymmetric extrusion10.1016/j.msea.2017.09.004 ↗
39. Ideal orientations and persistence characteristics of hexagonal close packed crystals in simple shear10.1016/j.actamat.2006.12.021 ↗
40. Analysis of texture evolution in magnesium during equal channel angular extrusion10.1016/j.actamat.2007.09.032 ↗
41. Difference in extrusion temperature dependences of microstructure and mechanical properties between extruded AZ61 and AZ91 alloys10.1016/j.jma.2022.05.015 ↗
42. Influence of rolling directions on microstructure, mechanical properties and anisotropy of Mg-5Li-1Al-0.5Y alloy10.1016/j.jma.2015.11.001 ↗
43. Enhancing strength and ductility of low RE content Mg-Gd-Y-Zr alloy via a novel thermomechanical treatment based on multi-directional forging10.1016/j.jallcom.2023.170535 ↗
44. Microstructure, texture, and strain-hardening behavior of extruded Mg-Gd-Zn alloys10.1016/j.msea.2019.138833 ↗
45. Microstructures and mechanical properties of Mg-5Li-4Sn-2Al-1Zn alloy after hot extrusion10.1016/j.msea.2022.144329 ↗
46. Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) alloy prepared by pre-deformation annealing, hot extrusion and ageing10.1016/j.msea.2017.06.096 ↗
47. High ductility of a Mg-Y-Ca alloy via extrusion10.1016/j.msea.2012.09.042 ↗
48. Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling10.1016/j.msea.2020.140488 ↗
49. Improving ductility of a Mg alloy via non-basal slip induced by Ca addition10.1016/j.ijplas.2019.04.020 ↗
50. Demonstration of alloying, thermal activation, and latent hardening effects on quasi-static and dynamic polycrystal plasticity of Mg alloy, WE43-T5, plate10.1016/j.ijplas.2016.01.005 ↗
51. Observation of non-basal slip in Mg-Y by in situ three-dimensional X-ray diffraction10.1016/j.scriptamat.2017.09.011 ↗