Two-phase separation facilitating the ordering of L10-FePt: experimental and thermodynamic investigation on Fe–Pt–Cu phase diagrams
Source abstract
Abstract
The L1 0 -FePt nanocrystals exhibit unique magnetic and catalytic properties, but suffer from the ordering difficulty. The addition of Cu can facilitate the L1 0 -FePt ordering for some Fe–Pt–Cu alloys, however, the action mechanism is far from being well understood. In this work, a systematic study has been performed to the phase diagrams of the Fe–Pt–Cu system. The isothermal sections at 600 °C, 750 °C and 1000 °C, as well as the partial vertical sections of Fe 50Pt 50–Cu 50Pt 50 and Fe 50Pt 50–Cu, were constructed. An emphasis has been paid to the L1 0 -FePt phase, which has a wide composition range with a solid solubility of Cu up to 40.0 at% at 600 °C. Its order-disorder transition temperature decreases rapidly when deviating from 54 at% Pt, but at different lower rates along (FePt) 100-xCu x and (Fe 50-xCu x)Pt 50 with the increase of Cu. The ternary miscibility gap which originates from the Fe–Cu side has been studied by both experimental determinations and thermodynamic calculations. The results indicate that, at certain low temperatures, for instance 300 °C, the metastable miscibility gap can expand even up to 45 at% Pt, entering the L1 0-FePt phase region. An ordering transition mechanism of the L1 0 -FePt phase stimulating by a two-phase separation was thus proposed. For a specially designed disordered Fe–Pt–Cu alloy, a metastable two-phase separation can take place firstly in the annealing process, driving the Cu atoms forming Cu-rich particles, leaving a large number of vacancies in the alloy, and consequently, accelerate the atomic diffusion and stimulate the subsequent L1 0 ordering transition. These results will provide a new perspective for the composition design of Fe–Pt–Cu catalysts and magnetic recording media.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Semiconductor materials and interfaces · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Perpendicular magnetic anisotropy and magnetic domain structure in sputtered epitaxial FePt (001) L10 films10.1063/1.368831 ↗
2. Monodisperse FePt nanoparticles and ferromagnetic FePt nanocrystal superlattices10.1126/science.287.5460.1989 ↗
3. Compositionally controlled FePt nanoparticle materials
4. Magnetically superior and easy to handle L10-FePt nanocrystals10.1063/1.1995959 ↗
5. Chemical synthesis of magnetic nanoparticles for permanent magnet applications10.1002/chem.201902916 ↗
6. Structurally ordered Fe3Pt nanoparticles on robust nitride support as a high performance catalyst for the oxygen reduction reaction10.1002/aenm.201803040 ↗
7. Effect of atomic ordering on the catalytic activity of carbon supported PtM (M = Fe, Co, Ni, and Cu) alloys for oxygen reduction in PEMFCs10.1149/1.1862256 ↗
8. Structurally ordered FePt nanoparticles and their enhanced catalysis for oxygen reduction reaction10.1021/ja1009629 ↗
9. New approach to fully ordered fct-FePt nanoparticles for much enhanced electrocatalysis in acid10.1021/acs.nanolett.5b00320 ↗
10. Multimetallic Au/FePt3 nanoparticles as highly durable electrocatalyst10.1021/nl102369k ↗
11. Ordered alloy formation for Pt3Fe/C, PtFe/C and Pt5.75Fe5.75Cuy/CO2-reduction electro-catalysts10.1016/j.electacta.2012.05.103 ↗
12. Fe stabilization by intermetallic L10-FePt and Pt catalysis enhancement in L10-FePt/Pt nanoparticles for efficient oxygen reduction reaction in fuel cells10.1021/jacs.7b12829 ↗
13. Temperature dependent magnetic properties of highly chemically ordered Fe55-xNixPt45 L10 films10.1063/1.1470254 ↗
14. Size-dependent chemical and magnetic ordering in L10-FePt nanoparticles10.1002/adma.200601904 ↗
15. Hard magnetic FePt nanoparticles by salt-matrix annealing10.1063/1.2166597 ↗
16. Dispersible ferromagnetic FePt nanoparticles10.1002/adma.200801620 ↗
17. Platinum–Iron–Nickel trimetallic catalyst with superlattice structure for enhanced oxygen reduction activity and durability10.1021/acs.iecr.6b02298 ↗
18. L10 ordering and microstructure of FePt thin films with Cu, Ag, and Au additive10.1063/1.1516870 ↗
19. Accelerating disorder–order transitions of FePt by preforming a metastable AgPt phase10.1016/j.actamat.2012.09.045 ↗
20. Effect of the Ag evolution process on ordering the transition for L10-FePt nanoparticles synthesized by Ag addition10.1039/D2NJ00337F ↗
21. Magnetic properties of FexPtyAu100-x-y nanoparticles10.1166/jnn.2010.2166 ↗
22. Au composition dependent order-disorder transitions of Fe−Pt intermetallic compounds: experiments and thermodynamic analysis10.1016/j.actamat.2022.118058 ↗
23. Direct synthesis of L10-FePt nanoparticles with high coercivity via Pb addition for applications in permanent magnets and catalysts10.1021/acsanm.9b02420 ↗
24. Reduction of ordering temperature of an FePt-ordered alloy by addition of Cu10.1063/1.1463213 ↗
25. Effect of Cu on the structure and magnetic properties of FePt sputtered film10.1016/S0304-8853(02)00065-3 ↗
26. Synthesis of L10-(FeyPt100−y)100−xCux nanoparticles with high coercivity by annealing at 400 °C10.1063/1.1803919 ↗
27. Magnetic properties, nanostructure and ordering kinetics of FePtCu thin films10.1142/S021797920906141X ↗
28. Effect of Cu doping on the structure and phase transition of directly synthesized FePt nanoparticles10.1016/j.jmmm.2016.09.047 ↗
29. Core/shell Cu/FePtCu nanoparticles with face-centered tetragonal texture: an active and stable low-Pt catalyst for enhanced oxygen reduction10.1016/j.nanoen.2018.10.034 ↗
30. Fabrication of electrodeposited FeCuPt nanodot arrays toward L10 ordering10.1109/TMAG.2017.2746741 ↗
31. Cu induced low temperature ordering of fct-FePtCu nanoparticles prepared by solution phase synthesis10.1039/C9TC03961A ↗
32. Influence of Cu on the improvement of magnetic properties and structure of L10 FePt nanoparticles
33. Evolution of stress with L10 ordering in FePt and FeCuPt thin films10.1063/1.1555893 ↗
34. Impact of stoichiometry on L10 ordering in FePt and FePtCu thin films10.1016/j.jmmm.2003.12.1387 ↗
35. Differential scanning calorimetry studies of the effect of Cu on the A1 to L10 transformation in FePt thin films10.1016/j.scriptamat.2005.04.026 ↗
36. Re-evaluation of the impact of ternary additions of Ni and Cu on the A1 to L10 transformation in FePt films10.1063/1.3592980 ↗
37. Copper-induced formation of structurally ordered Pt–Fe–Cu ternary intermetallic electrocatalysts with tunable phase structure and improved stability10.1021/acs.chemmater.8b02172 ↗
38. Effect of Pt substitution by Cu on structural and morphological changes in Fe–Pt nanoparticles during annealing as studied by in-situ transmission electron microscopy10.2320/matertrans.MD200710 ↗
39. Electronic and magnetic properties of Fe1−xCuxPt10.1063/1.1669126 ↗
40. Nanostructure and magnetic properties of highly (001) oriented L10 (Fe49Pt51)1−xCux films10.1063/1.2164428 ↗
41. Tuning magnetic anisotropy in (001) oriented L10 (Fe1−xCux)55Pt45 films10.1063/1.4799651 ↗
42. Magnetic anisotropy of Fe1−yXyPt-L10 [X = Cr, Mn, Co, Ni, Cu] bulk alloys10.1063/1.4898574 ↗
43. Re-examination of phase diagram of Fe–Pt system10.2320/matertrans.44.2723 ↗
44. Tuning nanoparticle structure and surface strain for catalysis optimization10.1021/ja5030172 ↗
45. Beneficial role of copper in the enhancement of durability of ordered intermetallic PtFeCu catalyst for electrocatalytic oxygen reduction10.1021/acsami.5b03137 ↗
46. Evaluation of performance and durability of platinum–iron–copper with L10 ordered face-centered tetragonal structure as cathode catalysts in polymer electrolyte fuel cells10.1007/s10800-018-1193-3 ↗
47. Redetermination of the Fe–Pt phase diagram by using diffusion couple technique combined with key alloys10.1515/ijmr-2021-8496 ↗
48. Second ed
49. Thermodynamics of alloys and phase equilibria in the copper–iron system10.1361/105497103770330280 ↗
50. Structural and phase equilibria studies in the system Pt–Fe–Cu and the occurrence of tulameenite (Pt2FeCu)10.1180/minmag.1985.049.353.08 ↗
51. Phase diagrams, crystallographic and thermodynamic data: Cu–Fe–Pt (Copper–Iron–Platinum)
52. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
53. The diffusion couple technique in phase diagram determination10.1016/S0925-8388(00)01487-0 ↗
54. Reliability of the diffusion-multiple approach for phase diagram mapping10.1023/B:JMSC.0000031472.25241.c5 ↗
55. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
56. Thermodynamic assessment of the Cu–Pt system10.1361/105497196X92736 ↗
57. A thermodynamic assessment of the Fe–Pt system10.1016/S0364-5916(02)00006-8 ↗
58. In situ X-ray measurement of order-disorder transition temperature of Fe-rich Fe–Pt alloys10.1143/JJAP.41.L155 ↗
59. Differential thermal analysis of the iron–platinum system10.1111/j.1600-0692.2004.00682.x ↗
60. Interdiffusion in the Fe–Pt system10.1007/s11661-011-1052-x ↗
61. Thermodynamic modeling of fcc order/disorder transformations in the Co–Pt system10.1016/j.calphad.2011.04.005 ↗
62. Experimental measurements of the heats of formation of Fe3Pt, FePt, and FePt3 using differential scanning calorimetry
63. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
64. A thermodynamic study of the γ phase solid solutions formed between palladium, platinum and iron10.1016/0001-6160(69)90024-8 ↗
65. Thermodynamic studies of some Fe–Pt alloys by the solid electrolyte galvanic cell method10.1034/j.1600-0692.2001.300410.x ↗
66. Activities of iron in iron-platinum alloys at 1300 °C
67. Activity of iron in iron-platinum solid solutions10.1016/0001-6160(54)90085-1 ↗
68. Empirical methods of predicting and representing thermodynamic properties of ternary solution phases10.1016/0364-5916(80)90016-4 ↗
69. The thermodynamic activities of copper and iron in the system copper–iron–platinum at 1300 °C10.1007/BF02825593 ↗
70. Study of the long-period ordered alloy Cu3Pt10.1143/JPSJ.34.384 ↗
71. Electron microscope and diffraction study on the ordered structures of platinum-rich copper–platinum alloys10.1107/S0021889874008697 ↗
72. Observation of twin-related order domains in CuFePt210.1002/pssa.2210950106 ↗
73. On the compound energy formalism applied to fcc ordering10.1016/S0364-5916(02)00007-X ↗