Control of Li-ion transport through a combination of conductive coating and charging protocol for a stable and extremely fast charging cathode
Source abstract
Abstract
This study demonstrates the importance of controlling Li-ion transport through a combination of conductive coating and charging protocol to achieve a stable and extremely fast charging cathode. In this research, the LiFePO 4 (LFP) material coated with carbon (C) and Li 1.3Al 0.3Ti 1.7(PO 4) 3 (LATP) solid electrolyte exhibits superior performance to the conventional carbon-coated LFP (LFP@C), especially at high current rates, demonstrating the possibility of developing an extremely fast charging cathode for practical applications. Our systematic experimental results reveal that the LATP coating effectively regulates the surface reactions, prolongs the voltage plateaus, and contributes additional capacity to the olivine LFP cathode material. To take advantage of the coating, a charging protocol consisting of multi-step constant current (MCC) charging combined with constant voltage (CV) charging has been proposed. During MCC charging, the current gradually increases to initiate Li-ion transport on the particle surface before accelerating charging in a short time. Under the proposed charging protocol, the LFP@LATP can stably deliver an average charge capacity of 161.7 mAh g −1 within 10 min for 100 cycles. This research also demonstrates the advantage of incorporating a Li-ion conductor into the electrode for the development of an extremely fast charging electrode.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Challenges and opportunities towards fast-charging battery materials10.1038/s41560-019-0405-3 ↗
2. Fast charging materials for high power applications10.1002/aenm.202001128 ↗
3. Fast charging of lithium-ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
4. Review of fast charging for electrified transport: demand, technology, systems, and planning10.3390/en15041276 ↗
5. Enabling fast charging - a battery technology gap assessment10.1016/j.jpowsour.2017.06.055 ↗
6. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries10.1016/j.jpowsour.2018.09.069 ↗
7. Extreme fast charge challenges for lithium-ion battery: variability and positive electrode issues10.1149/2.0731910jes ↗
8. How fast can a li-ion battery be charged? Determination of limiting fast charging conditions10.1021/acsaem.0c03114 ↗
9. Optimized charging of lithium-ion battery for electric vehicles: adaptive multistage constant current-constant voltage charging strategy10.1016/j.renene.2019.08.077 ↗
10. The development of optimal charging protocols for lithium-ion batteries to reduce lithium plating10.1016/j.est.2021.102573 ↗
11. Fast charging design for lithium-ion batteries via Bayesian optimization10.1016/j.apenergy.2021.118244 ↗
12. Who will drive electric vehicles, olivine or spinel?10.1039/c0ee00559b ↗
13. A general discussion of Li ion battery safety
14. Experimental and theoretical investigation of fluorine substituted LiFe0.4Mn0.6PO4 as cathode material for lithium rechargeable batteries10.1016/j.ssi.2014.03.005 ↗
15. Enhanced electrochemical performance of LiFe0.4Mn0.6(PO4)1-x(BO3)x as cathode material for lithium ion batteries10.1016/j.jelechem.2015.08.012 ↗
16. Enhanced electrochemical performance and manganese redox activity of LiFe0.4Mn0.6PO4 by iodine anion substitution as cathode material for Li-ion battery10.1016/j.jpowsour.2016.02.067 ↗
17. How to make lithium iron phosphate better: a review exploring classical modification approaches in-depth and proposing future optimization methods10.1039/C6TA05048D ↗
18. Review on defects and modification methods of LiFePO4 cathode material for lithium-ion batteries10.1021/acs.energyfuels.1c03757 ↗
19. LiFePO4/C nanocomposites for lithium-ion batteries10.1016/j.jpowsour.2017.01.080 ↗
20. Preparation and characterization of fluorine-substituted LiFeBO3 with carbon coating to enhance electrochemical performance and stability as a cathode material for Li-ion batteries10.1016/j.jpowsour.2022.231395 ↗
21. Electrochemical and spectroscopic studies on carbon-coated and iodine-doped LiFeBO3 as a cathode material for lithium-ion batteries10.1002/bkcs.12663 ↗
22. Overcoming the ultra-high C-rate limitation of LiFeBO3 with careful optimization of carbothermal synthesis conditions10.1016/j.jallcom.2023.169765 ↗
23. Influence of carbon coating on intercalation kinetics and transport properties of LiFePO410.1002/celc.201901219 ↗
24. Unlocking charge transfer limitations for extreme fast charging of Li-Ion batteries
25. Mechanical alloy coating of LATP decorated porous carbon on LiFe1/3Mn1/3Co1/3PO4/C composite cathode for high-voltage Li-ion battery10.1016/j.electacta.2020.136980 ↗
26. Construction of carbon-coated LiMn0.5Fe0.5PO4@Li0.33La0.56TiO3 nanorod composites for high-performance Li-Ion batteries10.1021/acsami.1c08373 ↗
27. Enhanced Electrochemical performance of Ni-rich cathode materials with Li1.3Al0.3Ti1.7(PO4)3 coating10.1021/acssuschemeng.9b05539 ↗
28. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes10.1016/j.nanoen.2021.106665 ↗
29. The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies10.1016/j.ensm.2022.08.026 ↗
30. Design of interfacial Li-ion transfer channels for practical improvement of a multicomponent high-voltage olivine cathode10.1016/j.ceramint.2024.01.140 ↗
31. Nonconjugated Redox-active Polymer Mediators For Rapid Electrocatalytic Charging Of Lithium Metal Oxides10.1021/acsaem.9b01007 ↗
32. Ultrafast charge/discharge by a 99.9% conventional lithium iron phosphate electrode containing 0.1% redox-active fluoflavin polymer10.1021/acsenergylett.0c00622 ↗
33. A hybrid Carbon–Li1.3Al0.3Ti1.7(PO4)3 conductive coating for high current rate LiFePO4 cathode material
34. Li1.3Al0.3Ti1.7(PO4)3 behaving as a fast ionic conductor and bridge to boost the electrochemical performance of Li4Ti5O1210.1021/acssuschemeng.7b04361 ↗
35. Solid-state reaction synthesis of nanoscale materials: strategies and applications10.1021/acs.chemrev.1c00637 ↗
36. Hyperfine fields at the li site in LiFePO4-type olivine materials for lithium rechargeable batteries: a 7Li MAS NMR and SQUID study10.1021/ja017838m ↗
37. M.E. Smith, Solid state NMR characterization of lithium conducting ceramics10.1016/0167-2738(96)00320-7 ↗
38. MAS NMR study of the metastable solid solutions found in the LiFePO4/FePO4 system10.1021/cm902714v ↗
39. Characterization of bulk and surface chemical states on electrochemically cycled LiFePO4: a solid state NMR study10.1149/2.060406jes ↗
40. Dependence of ionic conductivity on composition of fast ionic conductors Li1+xTi2-xAlx(PO4)3, 0≤x≤0.7. A parallel NMR and electric impedance study10.1021/cm010528i ↗
41. NMR Investigations in Li1.3Al0.3Ti1.7(PO4)3 ceramics. part i: structural aspect10.1021/acs.jpcc.6b06764 ↗
42. X-Ray Photoelectron spectroscopy investigations of carbon-coated LixFePO4 materials10.1021/cm801995p ↗
43. XPS and ionic conductivity studies on Li2O-Al2O3-(TiO2 or GeO2)-P2O5 glass-ceramics10.1016/S0167-2738(00)00500-2 ↗
44. Surface chemistry of LiFePO4 studied by Mössbauer and X-ray photoelectron spectroscopy and its effect on electrochemical properties10.1149/1.2433539 ↗
45. A novel and accurate analytical method based on X-ray photoelectron spectroscopy for the quantitative detection of the lithium content in LiFePO410.1039/C4AY00980K ↗
46. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
47. Roles of lithium aluminum titanium phosphate in lithium batteries10.1021/acsaem.2c04006 ↗
48. XPS studies of graphite electrode materials for lithium ion batteries10.1016/S0169-4332(00)00525-0 ↗
49. Interpretation of X-ray photoelectron spectra of carbon-nitride thin films: new insights from in situ XPS10.1016/j.carbon.2016.07.017 ↗
50. Deconvoluting the XPS spectra for nitrogen-doped chars: an analysis from first principles10.1016/j.carbon.2020.02.065 ↗
51. Lithium insertion into titanium phosphates, silicates, and sulfates10.1021/cm0201798 ↗
52. Fundamentals of inorganic solid-state electrolytes for batteries10.1038/s41563-019-0431-3 ↗
53. Active interphase enables stable performance for an all-phosphate-based composite cathode in an all-solid-state battery