Influence of different raw materials on the preparation of single-crystal LiNi0.5Mn1.5O4 by sol-gel method
Source abstract
Abstract
Recently, due to the escalating cost of cobalt, there has been a growing interest in the LiNi 0.5Mn 1.5O 4 (LNMO) cathode material, prompting efforts to enhance its performance in various aspects. However, there is a lack of research regarding the influence of raw materials used in the sol-gel method for LNMO preparation on the properties of the resulting product. In this study, we employed acetates, chlorides, and nitrates as raw materials and utilized a simple sol-gel approach to synthesize three types of single-crystal LNMO particles. Characterization of the material structures of these three samples revealed that LNMO prepared from acetates exhibited the highest concentration of oxygen vacancies (OVs) and demonstrated a more disordered structure, as well as better high-temperature stability. Scanning electron microscopy observations also indicated distinct differences in particle morphologies among samples prepared from different raw materials. The LNMO sample synthesized from acetates showed exceptional electrochemical performance. It achieved an initial coulombic efficiency of 85.62 % and a specific capacity of 111.19 mA h g –1, retaining 93.28 % of its capacity after 500 cycles at a 1 C rate.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Research progress in improving the cycling stability of high-voltage LiNi0.5Mn1.5O4 cathode in lithium-ion battery
2. Synthesis of high-voltage cathode material using the Taylor-Couette flow-based co-precipitation method10.3389/fchem.2023.1195170 ↗
3. Lattice deformation of LiNi0.5Mn1.5O4 spinel cathode for Li-ion batteries by ball milling10.1016/j.jpowsour.2019.02.063 ↗
4. In situ Sr2+-doped spinel LiNi0.5Mn1.5O4 cathode material for Li-ion batteries with high electrochemical performance and its impact on morphology10.1016/j.ceramint.2021.08.093 ↗
5. Simplified crystal grain boundary engineering of solid electrolyte-infused LiNi0.5Mn1.5O4 cathodes for high cycling stability lithium-ion batteries10.1016/j.jpowsour.2023.233434 ↗
6. Preparation and electrochemical properties of double-shell LiNi0.5Mn1.5O4 hollow microspheres as cathode materials for Li-ion batteries10.1039/C6RA05620B ↗
7. Impact of morphology of conductive agent and anode material on lithium storage properties
8. Formation kinetics of sol-gel derived LiFePO4 olivine analyzed by reliable non-isothermal approach10.1016/j.ceramint.2022.03.043 ↗
9. Preparation of Li(3)V(2)(PO(4))(3) as cathode material for aqueous zinc ion batteries by a hydrothermal assisted sol-gel method and its properties10.1039/D3RA01816D ↗
10. Photo-assisted low temperature crystallization of solution-derived LiCoO2 thin film10.1016/j.materresbull.2021.111241 ↗
11. LiMn2O4 prepared from waste lithium ion batteries through sol-gel process10.1016/j.jallcom.2021.159222 ↗
12. Ti surface doping of LiNi0.5Mn1.5O4−δ positive electrodes for lithium ion batteries10.1039/C7RA12932G ↗
13. Extremely conductive RuO2-coated LiNi0.5Mn1.5O4 for lithium-ion batteries10.1016/j.electacta.2017.02.109 ↗
14. Crystalline geometry engineering towards high-energy spinel cathode for lithium-ion batteries10.1016/j.jallcom.2022.165798 ↗
15. Granularity control enables high stability and elevated-temperature properties of micron-sized single-crystal LiNi0.5Mn1.5O4 cathodes at high voltage
16. Structure and morphology evolution in solid-phase synthesis lithium ion battery LiNi0.80Co0.15Al0.05O2 cathode materials with different micro-nano sizes of raw materials10.1016/j.ceramint.2018.02.141 ↗
17. Effects of raw materials on nonhydrolytic sol-gel synthesis of Ba0.6Sr0.4TiO310.1016/j.ceramint.2022.05.165 ↗
18. Effect of different MnO2 precursors on the electrochemical properties of spinel LiNi0.5Mn1.5O4 cathode active materials for high-voltage lithium ion batteries10.1016/j.mseb.2016.04.011 ↗
19. Octahedral nano-particles constructed LiNi0.5Mn1.5O4 microspheres as high-voltage cathode materials for long-life lithium-ion batteries10.1016/j.ceramint.2018.07.278 ↗
20. LiNi0.5Mn1.5O4-δ (LNMO) as Co-free cathode for lithium ion batteries via solution-gel synthesis: particle size and morphology investigation10.1016/j.jallcom.2021.162175 ↗
21. Improvement of the electrochemical properties of LiNi0.5Mn1.5O4 by controlling the heating atmosphere during synthesis10.1016/j.ceramint.2017.08.100 ↗
22. Effect of sol composition on solid electrode/solid electrolyte interface for all-solid-state lithium ion battery10.1016/j.electacta.2010.11.008 ↗
23. Morphology and electrochemical performance of Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode materials prepared with different metal sources10.1016/j.electacta.2013.08.002 ↗
24. Different strategies of introduction of lithium ions into nickel-manganese-cobalt carbonate resulting in LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode material for Li-ion batteries10.1016/j.ssi.2020.115273 ↗
25. Effects of inorganic salts on the morphological, structural, and electrochemical properties of prepared nickel-rich Li[Ni0.6Co0.2Mn0.2]O210.1016/j.jpowsour.2014.06.057 ↗
26. Stabilizing Li-rich NMC materials by using precursor salts with acetate and nitrate anions for Li-ion batteries10.3390/batteries5040069 ↗
27. Preparation and characterization of LiNi0.8Co0.15Al0.05O2 cathode material from (NH4)2C2O4·2H2O precipitant
28. Effects of raw materials on the electrochemical performance of Na-doped Li-rich cathode materials Li[Li0.2Ni0.2Mn0.6]O210.1007/s11581-018-2696-y ↗
29. Chloride-promoted formation of octahedral LiNi0.5Mn1.5O4 crystal with greatly enhanced electrochemical performance10.1016/j.ceramint.2016.02.161 ↗
30. Preparation and electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 synthesized by using different manganese sources10.1002/celc.201700062 ↗
31. Improving the electrochemical performance of single crystal LiNi0.5Mn1.5O4 cathode materials by Y–Ti doping and unannealing process10.1016/j.ceramint.2022.08.209 ↗
32. Effect of chromium and niobium doping on the morphology and electrochemical performance of high-voltage spinel LiNi0.5Mn1.5O4 cathode material10.1021/acsami.6b00877 ↗
33. Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery: Positive (100) surfaces in high-voltage spinel system10.1016/j.jpowsour.2015.09.066 ↗
34. Impacts of surface Mn valence on cycling performance and surface chemistry of Li- and Al-substituted spinel battery cathodes
35. High performance LiNi0.5Mn1.5O4 cathode by Al-coating and Al3+-doping through a physical vapor deposition method10.1016/j.electacta.2016.01.087 ↗
36. Ti surface doping of LiNi0.5Mn1.5O4−δ positive electrodes for lithium ion batteries10.1039/C7RA12932G ↗
37. Synthesis and electrochemical performance of Sn-doped LiNi0.5Mn1.5O4 cathode material for high-voltage lithium-ion batteries10.1007/s40843-016-5166-0 ↗
38. Structural, morphological, impedance and magnetic studies of nanostructured LiNi 0.45 M 0.1 Mn 0.45 O 2 (M Cu and Al) cathode materials for lithium-ion batteries10.1016/j.sajce.2017.10.005 ↗
39. Synergistic effects of oxygen vacancies and the chelation of tetracycline with metallic ions for enhanced degradation of tetracycline over photocatalysts La2−xKxNiMnO610.1039/D0CE01340D ↗
40. Thermodynamic analysis enables quantitative evaluation of lattice oxygen stability in Li-ion battery cathodes10.1021/acsenergylett.2c00353 ↗
41. How Mn/Ni ordering controls electrochemical performance in high-voltage spinel LiNi0.44Mn1.56O4 with fixed oxygen content10.1021/acsaem.0c01075 ↗
42. Surface degradation and chemical electrolyte oxidation induced by the oxygen released from layered oxide cathodes in Li−Ion batteries10.1002/batt.201800126 ↗
43. Oxygen-release-related thermal stability and decomposition pathways of LixNi0.5Mn1.5O4 cathode materials10.1021/cm403400y ↗
44. Utilizing environmental friendly iron as a substitution element in spinel structured cathode materials for safer high energy lithium-ion batteries10.1002/aenm.201501662 ↗
45. Integrated nano-domains of disordered and ordered spinel phases in LiNi0.5Mn1.5O4 for Li-Ion batteries10.1021/cm501203r ↗
46. Enhancement of electrochemical performance of LiCoO2 cathode material at high cut-off voltage (4.5 V) by partial surface coating with graphene nanosheets10.20964/2020.09.07 ↗
47. First principles calculations of formation energies and electronic structures of defects in oxygen-deficient LiMn2O410.1149/1.1522720 ↗
48. The effects of N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide-based electrolyte on the electrochemical performance of high capacity cathode material Li Li0.2Mn0.54Ni0.13Co0.13O210.1016/j.electacta.2011.09.069 ↗
49. Effect of ZnO modification on the performance of LiNi0.5Co0.25Mn0.25O2 cathode material10.1016/j.electacta.2009.05.034 ↗