journal article·2023-12

Magnetic and structural characteristics of self-assembly Co-Ni-Zn ternary nanocrystals

Xiaowei Zhou, Yun Guo, Zhou Lu

Publisher page

Abstract

With respect to the rapid growth of high-performance applications for magneto-electric alloys, extensive attempts have been made to develop the electroplating of nanocrystalline magnets coatings within high coercivity and excellent corrosion resistance. Herein we proposed a low-cost and practical electroplating of the substitution of Zn2 + ions in Ni-Co bath for the ternary Ni-Co-Zn soft-magnetic alloys. Anomalous co-deposition of Ni0.12Co0.88-xZnx (x = 0–0.36) alloys were aligned from sulfamate electrolytes within L -ascorbic acid (H2Asc) as complexant, in which the ratio (x) of atomic molar was regulated by dropping ZnCl2 concentrated solution based on Nernst theory and Cyclic-Voltammetry (CV) tests. Results validated that it yielded crystal growth within a narrow size of 150–250 nm, allowing the structural recombination of the spider-web-like ZnO tangled with Ni-Co nanocrystals. In addition to the enhanced corrosion behavior of the ternary Ni-Co-Zn alloys compared to binary Ni-Co, it was attributed to the coexistence of γ-Ni5Zn21 phase and [Zn(OH)4]2- colloidal-like corrosion products. More impressively, it depicted high coercivity (Hc) of ∼15.3 Oe and superior saturation magnetization (Ms) of ∼153.2 emu/g from VSM tests for Ni0.12Co0.64Zn0.24 (x = 0.24), which was due to the self-assembly of ZnO-rich dispersoids twined around GB regions to be magnetic isolation and restrict the movement of domain walls for higher coercivity. Especially for the sample (x = 0.24) after aged at 450 °C for 2 h, it achieved a superior Hc value of 45.8 Oe that was 3 times higher than those without ageing, which was correlated well with large internal stresses by the disordered stacking among hetero-atoms. So the integrated Ni-Co-Zn ternary soft magnets offered a promising approach to achieving high coercivity with excellent anti-corrosive properties, satisfying the stringent requirements of potential applications used in magnetic memory devices, etc.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · ZnO doping and properties · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Magnetic performance and microstructure of NdFeB sintered magnet by diffusing Tb10Pr90-x (Cu, Al, Ga)x alloys10.1016/j.jallcom.2022.167888 ↗
2. Magnetic electrodeposition10.1016/S0925-8388(01)01313-5 ↗
3. Investigation of structural, morphological and magnetic properties of MFe2O4 (M = Co, Ni, Zn, Cu, Mn) obtained by thermal decomposition10.3390/ijms23158483 ↗
4. Comparison of magnetic and dielectric properties of transition metal nanospinel ferrites, MFe2O4, (M = Co, Cu, Ni, Zn) synthesized by one-pot combustion route10.1016/j.matpr.2021.06.177 ↗
5. Dependence of structural, morphological and magnetic properties of manganese ferrite on Ni-Mn substitution10.3390/ijms23063097 ↗
6. Synthesis and investigation of structural, morphological, and magnetic properties of the manganese doped cobalt-zinc spinel ferrite10.1016/j.jallcom.2021.162966 ↗
7. Structural and magnetic characterization of Co2+ substituted Ni-Zn ferrite nanoparticles synthesized by refluxing co-precipitation and their potential application as gas sensors10.1016/j.mseb.2023.116554 ↗
8. Elaboration and experimental investigation of Zn-Ni-Co spinel ferrite multi-doped Rare-Earth (Gd, Er, and Sm) prepared by coprecipitation method10.1007/s10948-022-06189-6 ↗
9. Exploration of Ce+3 substitution on electron density distribution, optical, and magnetic properties of Ni-Co-Zn spinel nano-ferrites10.1007/s10971-023-06121-x ↗
10. Effect of Ce content on the magnetic properties and microstructure of sintered Nd-Ce-Fe-B magnets after Pr70Cu30 alloy diffusion10.1016/j.jallcom.2022.165661 ↗
11. Structure and properties of composite Ni-Co-Mn coatings on metal interconnects by electrodeposition10.1016/j.jallcom.2019.152006 ↗
12. Studying structural, magnetic and morphological features of electrochemically fabricated thin films of Co-Ni-Fe with different Fe compositions10.1016/j.tsf.2021.138901 ↗
13. Processing and characterization of an electrodeposited nanocrystalline Co-Fe-Ni-Zn multi-principal element alloy film10.1016/j.surfcoat.2023.129740 ↗
14. Effects of ytterbium substitution on the structural, electrical and magnetic properties of Ni-Zn-Co ferrites for microwave equipment10.1016/j.ceramint.2023.06.135 ↗
15. Preparation of Co-Fe-Ni alloy micropillar by microanode-guided electroplating10.1016/j.jallcom.2021.160873 ↗
16. An investigation on magnetic properties and electrical resistivity of nanocrystalline CoFeNi thick films synthesized through stabilized bath10.1016/j.jmrt.2022.10.002 ↗
17. Nanocrystalline soft ferromagnetic Ni-Co-P thin film on Al alloy by low temperature electroless deposition10.1016/j.apsusc.2007.08.017 ↗
18. 3D Xanthium-like of Ni-Co-Zn ternary alloys as superhydrophobic coatings toward porous Ti surface for its anti-icing performances10.1016/j.surfcoat.2023.130034 ↗
19. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
20. The effect of surfactant on the structure, composition and magnetic properties of electrodeposited CoNiFe /Cu microwire10.1016/j.matchemphys.2018.02.026 ↗
21. An investigation on magnetic properties and electrical resistivity of nanocrystalline CoFeNi thick films synthesized through stabilized bath10.1016/j.jmrt.2022.10.002 ↗
22. Surface microstructure and corrosion resistance of electrodeposited ternary Zn-Ni-Co alloy10.1023/A:1003840519591 ↗
23. Development and characterization of Zn-Ni, Zn-Co and Zn-Ni-Co coatings10.1080/02670844.2019.1680037 ↗
24. Influence of molybdenum on properties of Zn-Ni and Zn-Co alloy coatings10.1016/j.surfcoat.2009.09.042 ↗
25. Study of the mechanical and structural properties of Zn-Ni-Co ternary alloy electroplating10.1007/s11998-010-9250-9 ↗
26. Influence of Ni2+ concentration and deposition potential on the characterization of thin electrodeposited Zn-Ni-Co coatings10.1016/j.matchemphys.2010.10.007 ↗
27. Anomalous co-deposition behaviors and corrosive properties of Ni-Co-Zn ternary alloys
28. Influence of bath concentration and pH on electrodeposition process of ternary Zn-Ni-Mo alloy coatings10.1179/0020296714Z.000000000183 ↗
29. The characterization of ternary Zn-Ni-Co alloy coatings electrochemically deposited on steel from sulfate solution
30. Effect of Co content on magnetic features and SPIN states IN Ni-Zn spinel ferrites10.1016/j.ceramint.2021.01.063 ↗
31. Magnetic properties of Mn/Co substituted nano and bulk Ni-Zn ferrites: a comparative study10.1016/j.matchemphys.2023.128055 ↗
32. Influence of Ni2+ concentration and deposition potential on the characterization of thin electrodeposited Zn-Ni-Co coatings10.1016/j.matchemphys.2010.10.007 ↗
33. Effect of silica embedding on the structure, morphology and magnetic behavior of (Zn0.6Mn0.4Fe2O4)δ/(SiO2)(100-δ) nanoparticles10.3390/nano11092232 ↗
34. Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni-Co alloy powders10.1016/S1003-6326(20)65276-1 ↗
35. Effect of Mn and Zn binary Co-substitution on structure and magnetic properties of cobalt ferrites10.1016/j.mseb.2022.116229 ↗
36. Electroplating and characterization of Zn-Ni, Zn-Co and Zn-Ni-Co alloys10.1016/j.surfcoat.2010.08.077 ↗
37. Role of Ni content in improvement of corrosion resistance of Zn-Ni alloy in 3.5% NaCl solution. Part I: polarization and impedance studies10.1016/S1003-6326(15)63906-1 ↗
38. Characterization of the influence of Ni content on the corrosion resistance of electrodeposited Zn-Ni alloy coatings10.1016/j.surfcoat.2016.01.027 ↗
39. Investigation of the magnetic properties, microstructure and corrosion resistance of sintered Nd-Ce-Fe-B magnets with different Ce contents10.1016/j.jmmm.2022.169477 ↗
40. Coercivity enhancement of a Ce-based permanent magnet by grain boundary diffusion with Re70Cu30 (Re:Nd/Dy) eutectic alloys10.1016/j.jallcom.2019.152965 ↗
41. Correlation between structure, morphology and magnetic properties in ZnxCo0.8−xNi0.2Fe2O4 @ SiO2 (0.1÷0.7) nanocomposites10.1016/j.jallcom.2022.168503 ↗
42. Merits of Pr80Ga20 grain boundary diffusion process towards high coercivity-remanence synergy of Nd-La-Ce-Fe-B sintered magnet10.1016/j.actamat.2022.117873 ↗
43. Super-high coercivity NdFeB magnet fabricated with double Tb-rich/lean shells by double alloy method and grain boundary diffusion10.1016/j.jallcom.2022.168368 ↗
44. Magnetic and electric properties of transition-metal-doped ZnO films10.1063/1.1384478 ↗
45. Co substituted Ni-Zn ferrites with tunable dielectric and magnetic response for high-frequency applications10.1016/j.ceramint.2022.05.197 ↗
46. Pinning effect of the antiphase and grain boundaries on magnetic domains in double perovskite A2FeMoO610.1016/j.jmmm.2006.10.1054 ↗
47. Direct observation and stochastic analysis on thermally activated nucleation and growth of individual magnetic domain10.1016/j.jmmm.2023.171228 ↗
48. Magnetic domain reversal induced by thermal activation in SmCo alloy10.1016/j.jallcom.2021.162684 ↗
49. Impact of annealing temperature and ferrite content embedded in SiO2 matrix on the structure, morphology and magnetic characteristics of (Co0.4Mn0.6Fe2O4)δ (SiO2)100-δ nanocomposites10.1016/j.jallcom.2021.159203 ↗
50. A tool to predict coercivity in magnetic materials