Surface modification of bio-orderly CrTiN thin films with periodic corrugated nanopod structures by picosecond laser ablation
Source abstract
Abstract
With the increasing demand for biomimetic structures in the biomedical field, ultrafast lasers have been extensively used for modifying the surfaces of alloy thin films. Herein, we propose a method entailing the use of picosecond laser ablation for modifying the surfaces of chromium–Ti nitride (CrTiN) thin films for cell culture processes. The surface roughness and ripple characteristics of the periodic corrugated nanopod structures formed on these films were effectively controlled by controlling the laser fluence. The surface roughness and contact angles of ripple structures were affected by the laser fluence, and the mechanical and electrochemical properties of these structures could be improved by appropriately controlling the laser fluence. The wetting behaviors of the prepared CrTiN thin films with different roughness values were affected by the laser–material interaction. Furthermore, the periodic corrugated nanopod structures on these films enhanced the proliferation and viability of A549 cells on the films. This paper provides an alternative method for growing cells on surfaces with periodic microstructures or nanostructures. The proposed method has the potential for use in the development of new microcomposites or nanocomposites and in-vivo detection in biomedical applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Diamond and Carbon-based Materials Research · Laser-Ablation Synthesis of Nanoparticles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A comparative multi-parametric in vitro model identifies the power of test conditions to predict the fibrotic tendency of a biomaterial10.1038/s41598-017-01584-9 ↗
2. Explosive cell lysis as a mechanism for the biogenesis of bacterial membrane vesicles and biofilms10.1038/ncomms11220 ↗
3. Surface modification of polymer substrates for biomedical applications10.3390/ma10101115 ↗
4. A graded nano-TiN coating on biomedical Ti alloy: low friction coefficient, good bonding and biocompatibility10.1016/j.msec.2016.10.033 ↗
5. Research progress on surface treatments of biodegradable Mg alloys: A review10.1021/acsomega.9b03423 ↗
6. Antifouling and mechanical properties of photografted zwitterionic hydrogel thin-film coatings depend on the cross-link density10.1021/acsbiomaterials.1c00852 ↗
7. Simple surface modification of poly(dimethylsiloxane) via surface segregating smart polymers for biomicrofluidics10.1038/s41598-019-43625-5 ↗
8. Mechanical strength, biodegradation, and in vitro and in vivo biocompatibility of Zn biomaterials10.1021/acsami.8b20634 ↗
9. biocompatibility study of nanocomposite titanium boron nitride (TiBN) thin films for orthopedic implant applications
10. Influence on proliferation and adhesion of human gingival fibroblasts from different titanium surface decontamination treatments: an in vitro study10.1016/j.archoralbio.2017.12.013 ↗
11. Advances in implant surface modifications to improve osseointegration10.1039/D1MA00675D ↗
12. Surface modification techniques of titanium and its alloys to functionally optimize their biomedical properties: thematic review10.3389/fbioe.2020.603072 ↗
13. In vitro biocompatibility response of Ti-Zr-Si thin film metallic glasses10.1016/j.apsusc.2014.09.204 ↗
14. Ti, Zr and Ta coated UHMWPE aiming surface improvement for biomedical purposes10.1016/j.compositesb.2020.107909 ↗
15. In vitro bio-tribological behaviour of textured nitride coating on selective laser melted Ti-6Al-4V alloy10.1016/j.surfcoat.2021.126904 ↗
16. Biocompatibility and electrochemical evaluation of ZrO2 thin films deposited by reactive magnetron sputtering on MgZnCa alloy10.1016/j.jma.2021.07.010 ↗
17. In vitro study of human endothelial progenitor cells behavior on nitrided Ni-free Ti-27 Nb alloy
18. Construction of a TiO2/CuO2 multifunctional coating on Ti-Cu alloy and its influence on the cell compatibility and antibacterial properties10.1016/j.surfcoat.2021.127438 ↗
19. Bio-tribological response of duplex surface engineered SS316L for hipimplant application10.1016/j.apsusc.2019.145009 ↗
20. Adhesion enhancement of PEEK/6161-T6 FLJ joints via laser surface modification10.1016/j.compositesb.2021.108797 ↗
21. Characterization and evaluation of a femtosecond laser-induced osseointegration and an anti-inflammatory structure generated on a titanium alloy10.1093/rb/rbab006 ↗
22. Oxidation facilitated antimicrobial ability of laser micro-textured titanium alloy against gram-positive Staphylococcus aureus for biomedical applications10.2351/1.5039860 ↗
23. LIPSS and DLIP: from hierarchical to mutually interacting, homogeneous, structuring
24. Fabrication of superhydrophobic and ice-repellent surfaces on pure aluminium using single and multiscaled periodic textures10.1038/s41598-019-49615-x ↗
25. Biocompatible nano-ripples structured surfaces induced by femtosecond laser to rebel bacterial colonization and biofilm formation10.1016/j.optlastec.2019.105973 ↗
26. Surface engineering strategies to enhance the in situ performance of medical devices including atomic scale engineering10.3390/ijms222111788 ↗
27. The effects of femtosecond laser-textured Ti-6Al-4V on wettability and cell response10.1016/j.msec.2016.06.072 ↗
28. Nitrogen assisted formation of large-area ripples on Ti6Al4V surface by nanosecond pulse laser irradiation10.1016/j.precisioneng.2021.09.012 ↗
29. Laser-assisted surface texturing of Ti/Zr multilayers for mesenchymal stem cell response10.3390/coatings9120854 ↗
30. Global cancer statistics 2018: GLOBOCAN estimates of incidence and mortality worldwide for 36 cancers in 185 countries
31. In vitro cultivation of human tumors: establishment of cell lines derived from a series of solid tumors10.1093/jnci/51.5.1417 ↗
32. A continuous tumor-cell line from a human lung carcinoma with properties of type II alveolar epithelial cells10.1002/ijc.2910170110 ↗
33. Stem cell-based lung-on-chips: the best of both worlds?10.1016/j.addr.2018.07.005 ↗
34. A microfluidic biochip for locally confined stimulation of cells within an epithelial monolayer10.1039/C7RA11943G ↗
35. Cancer statistics, 2018
36. Polymer-ceramic fiber nanocomposite coatings on titanium metal implant devices for diseased bone tissue regeneration
37. Discovery of new fluorescent thiazole–pyrazoline derivatives as autophagy inducers by inhibiting mTOR activity in A549 human lung cancer cells10.1038/s41419-020-02746-w ↗
38. The endocytic pathway of Pt nanoclusters and their induced apoptosis of A549 and A549/Cis cells through c-Myc/p53 and Bcl-2/caspase-3 signaling pathways10.1016/j.biopha.2021.112360 ↗
39. Deep-subwavelength ripples on the ZnO surface obtained via metal-film-assisted femtosecond laser processing10.1016/j.apsusc.2021.151576 ↗
40. The role of the substrate material type in formation of laser induced periodical surface structures on ZnO thin films10.1016/j.apsusc.2012.01.089 ↗
41. Chemical effects during the formation of various types of femtosecond laser‑generated surface structures on titanium alloy10.1007/s00339-020-3434-7 ↗
42. Ablation morphology and ablation threshold of Ti-6Al-4V alloy during femtosecond laser processing10.1007/s00339-018-1928-3 ↗
43. Spot size engineering in microscope-based laser spectroscopy10.1021/acs.jpcc.6b04574 ↗
44. The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air10.1016/j.apsusc.2004.03.229 ↗
45. Threshold dependence of deep and near-subwavelength ripples formation on natural MoS2 induced by femtosecond laser10.1038/srep19571 ↗
46. Properties of C-doped CrTiN films on the 316L stainless steel bipolar plate for PEMFC10.1016/j.ijhydene.2021.07.109 ↗
47. Ali K. Mehr, M.R.Z. Meymian, Abbas K. Mehr, Nanoindentation and nanoscratch studies of submicron nanostructured Ti/TiCrN bilayer films deposited by RF-DC co-sputtering method, Ceram. Int., 44, pp. 21825–21834.10.1016/j.ceramint.2018.08.288 ↗
48. Laser surface alloying of copper with Cr/Ti/CNT for enhancing surface properties10.1016/j.jmrt.2021.12.129 ↗
49. Electrochemical behavior of TiN, CrN and TiN/CrN nanostructured coatings on the nickel-chromium alloy used in dental fixed prosthesis10.1080/21870764.2020.1776915 ↗
50. Frictional properties of diamond-like carbon, glassy carbon and nitrides with femtosecond-laser-induced nanostructure10.1016/j.diamond.2011.02.010 ↗
51. Friction and wear characterization of LIPSS and TiN / DLC variants
52. In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding10.1016/j.jallcom.2021.161252 ↗
53. Characterization, corrosion behavior, cellular response and in vivo bone tissue compatibility of titanium–niobium alloy with low Young's modulus10.1016/j.msec.2015.10.062 ↗
54. Laser-induced periodic surface structures on ZnO thin film for high response NO2 detection10.1016/j.apsusc.2019.01.115 ↗
55. Femtosecond-laser-ablation induced transformations in the structure and surface properties of diamond-like nanocomposite films10.1016/j.apsusc.2019.144907 ↗
56. Picosecond laser surface modification of aluminum oxide with fish-scale structures for cell culture10.1016/j.ceramint.2020.04.067 ↗
57. Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration10.1038/srep36296 ↗
58. Enhanced corrosion, tribocorrosion resistance and controllable osteogenic potential of stem cells on micro-rippled Ti6Al4V surfaces produced by pulsed laser remelting10.1016/j.jmapro.2021.03.023 ↗