Micromechanical simulations and experimental characteristics of randomly distributed carbon nanotubes reinforced Mg matrix composites
Source abstract
Abstract
In this study, finite element analysis was performed using representative volume elements (RVE). The cohesive zone model was implemented to govern the failure behavior of the CNTs/matrix interface. The RVE to understand the micromechanical response and damage behavior of randomly distributed carbon nanotubes (CNTs)/Mg matrix composites (MMCs). The cohesive zone model was implemented to govern the failure behavior of the CNTs/Mg interface. The RVE for macroscopic structural analysis was strained under assumed boundary conditions, where it provided a stress-strain curve for the composite. The simulation data can achieve excellent agreement with the experimental results. The simulations and experimental results indicate that the initial damage in the composite occurs in the vicinity of CNTs. The stress concentration at the CNT end increases with the increasing tensile load , resulting in interfacial debonding, the main form of crack growth of the CNTs/Mg composite. The CNTs can passivate the crack tip and change the propagation direction of the main crack, causing a delay in fracture. CNTs played an important role in governing the fracture pattern of composite. The pullout and bridging of CNTs were the main strengthening mechanisms of the composites, which was beneficial for improving strength and toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Effect of Y and Gd content on the microstructure and mechanical properties of Mg-Y-RE alloys10.1016/j.jma.2019.03.002 ↗
2. Current research progress in grain refinement of cast magnesium alloys: a review article10.1016/j.jallcom.2014.09.061 ↗
3. Superhydrophobic surface of Mg alloys: a review10.1016/j.jma.2018.02.001 ↗
4. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
5. Fabrication of magnesium based composites reinforced with carbon nanotubes having superior mechanical properties10.1016/j.matchemphys.2011.02.036 ↗
6. Investigation of the mechanical response of single crystal magnesium considering slip and twin10.1016/j.ijplas.2018.08.002 ↗
7. Proliferation of twinning in hexagonal close-packed metals: application to magnesium10.1016/j.jmps.2017.12.009 ↗
8. Improved processing of carbon nanotube/magnesium alloy composites10.1016/j.compscitech.2009.02.020 ↗
9. High performance carbon nanotube-reinforced magnesium nanocomposite10.1016/j.msea.2019.138575 ↗
10. Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs10.1016/j.msea.2015.01.039 ↗
11. Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites10.1016/j.msea.2020.140632 ↗
12. Investigation on the compressive damage mechanisms of 3D woven composites considering stochastic fiber initial misalignment10.1016/j.compositesa.2021.106295 ↗
13. Micromechanical damage behavior of fiber-reinforced composites under transverse loading including fiber-matrix debonding and matrix cracks10.1007/s10704-020-00484-w ↗
14. An RVE procedure for micromechanical prediction of mechanical behavior of dual-phase steel10.1016/j.msea.2017.04.032 ↗
15. A micromechanics based elasto-plastic damage model for unidirectional composites under off-axis tensile loads
16. Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: ductile versus brittle fracture mechanics approach10.1177/1056789519894379 ↗
17. Compressive damage mode manipulation of fiber-reinforced polymer composites10.1016/j.engfracmech.2019.106799 ↗
18. Micromechanical modeling of damage evolution and mechanical behaviors of CF/Al composites under transverse and longitudinal Tensile Loadings10.3390/ma12193133 ↗
19. Simulations of deformation and damage processes of SiCp/Al composites during tension10.1016/j.jmst.2017.09.005 ↗
20. Processing, microstructure and mechanical properties of bimodal size SiCp reinforced AZ31B magnesium matrix composites10.1016/j.jma.2015.05.002 ↗
21. Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibers10.1016/j.compositesb.2021.108671 ↗
22. An advanced method for efficiently generating composite RVEs with specified particle orientation10.1016/j.compscitech.2021.108647 ↗
23. Efficient generator of random fiber distribution with diverse volume fractions by random fiber removal10.1016/j.compositesb.2018.12.042 ↗
24. Stochastic micromechanical modeling of transverse punch shear damage behavior of unidirectional composites10.1177/0021998318796174 ↗
25. Magnesium composites with hybrid nano-reinforcements: 3D simulation of dynamic tensile response at elevated temperatures
26. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
27. An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al‐matrix composites10.1002/adma.200601381 ↗
28. Carbon nanotubes (CNTs)-reinforced magnesium-based matrix composites: a comprehensive review10.3390/ma13194421 ↗
29. A novel method to fabricate CNT/Mg–6Zn composites with high strengthening efficiency10.1007/s40195-014-0144-1 ↗
30. Distribution and integrity of carbon nanotubes in carbon nanotube/magnesium composites10.1016/j.jallcom.2014.05.153 ↗
31. Thermal expanding behavior of carbon nanotube-reinforced metal matrix nanocomposites-a micromechanical modeling10.1016/j.jallcom.2018.02.100 ↗
32. Superplastic deformation behaviors and power dissipation rate for fine-grained Ti-6Al-4V Titanium alloy processed by direct rolling10.3390/cryst12020270 ↗
33. Modelling of cavity growth during superplastic flow of a fine-grained Ti-4Al-4V titanium alloy processed by direct rolling10.1080/09500839.2022.2036380 ↗