Enhancing the hot-working capability of TiAl intermetallics via innovative microstructural design
Source abstract
Abstract
The poor hot workability of TiAl intermetallics, stemming from their high dynamic recrystallization (DRX) temperature and sluggish atomic diffusion, severely limits their application in aerospace structural components. Here, this work introduced a novel three-phase bimodal (T-B) structure achieved through triggering the cellular reaction of full lamellar microstructure, to overcome this challenge. The T-B structure lowers the DRX temperature by at least 250 °C compared to conventional microstructures in TiAl intermetallics, enabling crack-free compression at 800 °C with 60 % strain—a first for TiAl intermetallics. Notably, ultrafine grains (0.8 μm) are achieved through low-temperature thermal compression, offering unprecedented opportunities to tailor mechanical properties. It is revealed that the pearlitic-like microstructure within the T-B structure exhibits exceptional strain-hardening capacity, generating a much higher density of dislocations during hot deformation. The higher density of dislocations serves as a potent catalyst, supplying abundant driving force and ultra-fine nuclei to facilitate DRX while eliminating stress concentration at significantly reduced temperatures. Furthermore, twin-induced and grain boundary-induced DRX mechanisms are unraveled during deformation at lower temperature, highlighting the grain refinement mechanism induced by the two DRX process. Finally, a novel low-temperature thermoforming process (800–1000 °C) is proposed, circumventing the need for β -stabilizing elements and reducing oxidation risks. This work not only advances the fundamental understanding of DRX in ordered intermetallics but also provides a new pathway to improve the manufacturing process of TiAl components.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Development of gamma titanium aluminide (γ-TiAl) alloys: a review10.1016/j.jallcom.2022.167262 ↗
2. Wrought TiAl blades
3. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
4. Compression damage and tensile fracture behavior of TiAl alloy turbine
5. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
6. Light-weighting in aerospace component and system design10.1016/j.jppr.2018.04.001 ↗
7. Research progress on TiAl alloy prepared by powder metallurgy
8. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
9. A review of microstructure control and mechanical performance optimization of γ-TiAl alloys10.1016/j.jallcom.2022.167611 ↗
10. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
11. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
12. Hot-working behavior of an advanced intermetallic multi-phase γ-TiAl based alloy10.1016/j.msea.2014.07.040 ↗
13. Feasibility study of a flexible grinding method for precision machining of the TiAl-based alloy10.1080/10426914.2019.1628255 ↗
14. Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloy10.1016/S1359-6454(00)00093-8 ↗
15. An investigation on microstructural and mechanical properties of powder metallurgical TiAl alloy during hot pack-rolling10.1016/j.msea.2014.09.091 ↗
16. Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy10.1016/j.actamat.2016.12.056 ↗
17. Diffusion in the Ti–Al system10.1016/S1359-6454(99)00400-0 ↗
18. Theories and applicability of grain size piezometers: the role of dynamic recrystallization mechanisms10.1016/j.jsg.2008.03.004 ↗
19. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
20. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
21. Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability10.1016/j.actamat.2023.119036 ↗
22. Microstructural evolution, hot workability, and mechanical properties of Ti–43Al–2Cr–2Mn–0.2Y alloy10.1016/j.matdes.2015.10.076 ↗
23. Improvement of microstructure, mechanical properties and hot workability of a TiAl-Nb-Mo alloy through hot extrusion10.1016/j.msea.2017.08.082 ↗
24. Breaking the high-temperature strength-ductility trade-off in TiAl alloys through microstructural optimization10.1016/j.ijplas.2023.103756 ↗
25. History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations10.1016/j.jallcom.2022.164811 ↗
26. Decomposition and phase transformation mechanisms of α2 lamellae in β-solidified γ-TiAl alloys10.1016/j.actamat.2022.118492 ↗
27. Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy10.1016/j.msea.2019.138804 ↗
28. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800 ℃ in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
29. Recrystallization mechanisms and microstructure development in emerging metallic materials: a review
30. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
31. Orderly nucleation and competitive growth behaviors of Ti-Al intermetallic compounds in Ti/TiAl3 diffusion couple under high temperature10.1016/j.jallcom.2023.168815 ↗
32. Single-phase interdiffusion in TiAl and Ti3Al intermetallic compounds10.1016/0921-5093(96)10246-X ↗
33. Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature10.1016/j.jmrt.2021.06.107 ↗
34. Solid-State processing route, mechanical behaviour, and oxidation resistance of TiAl alloys10.1155/2019/4251953 ↗
35. Dynamic recrystallization mechanism of γ and α phases during the isothermal compression of γ-TiAl alloy with duplex structure10.1016/j.jallcom.2020.156089 ↗
36. Nanotwinning-assisted recrystallization10.1038/s41563-022-01307-0 ↗
37. Dynamic recrystallization of titanium: effect of pre-activated twinning at cryogenic temperature10.1016/j.actamat.2018.05.057 ↗
38. Effect of twin nucleation and twin on the recrystallization of a nickel-based superalloy during hot compression10.1016/j.matchar.2022.112362 ↗
39. Dependency of rate sensitive DRX behaviour on interstitial content of a Fe-Cr-Ni-Mo alloy10.1016/j.msea.2018.11.062 ↗
40. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
41. Microstructural evolution and dynamic recrystallization behavior of β–γ TiAl-based alloy during hot compression10.1002/adem.201600546 ↗
42. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
43. High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy10.1016/j.jallcom.2019.02.207 ↗
44. Flow behavior and microstructure evolution of a P/M TiAl alloy during high temperature deformation10.1016/j.msea.2011.05.071 ↗
45. Microstructural characteristics and dynamic recrystallization behavior of β-γ TiAl based alloy during high temperature deformation10.1016/j.intermet.2018.04.002 ↗
46. Evolution of microstructure and texture of a near α titanium alloy during forging bar into disk10.1016/j.jallcom.2020.154750 ↗
47. The mechanistic link between macrozones and dwell fatigue in titanium alloys10.1016/j.ijfatigue.2020.105971 ↗
48. Hot deformation behaviour, constitutive model description, and processing map analysis of superalloys: an overview of nascent developments10.1016/j.jmrt.2023.09.180 ↗
49. Revealing ductile/quasi-cleavage fracture and DRX-affected grain size evolution of AA7075 alloy during hot stamping process10.1016/j.ijmecsci.2021.106843 ↗
50. Controlling grain size via dynamic recrystallization in an advanced polycrystalline nickel base superalloy10.1016/j.jallcom.2017.01.179 ↗
51. γ-Phase transformation, dynamic recrystallization and texture of a forged TiAl-based alloy based on plane strain compression at elevated temperature10.1016/j.matdes.2015.11.120 ↗
52. Temperature-dependent yield strength and deformation mechanism of a casting Ni-based superalloy containing low volume-fraction γ′ phase10.1016/j.jallcom.2022.164187 ↗
53. Intersections of deformation twins in TiAl II. Models and analyses10.1080/01418619308213977 ↗