Influence of aluminum addition on the microstructure and tribomechanical behavior of HVOF-sprayed AlxFeCrMnCoNi high entropy coatings (HECs)
Source abstract
Abstract
High-entropy alloys (HEAs) have gained significant attention due to their exceptional mechanical and thermal properties; however, their performance assessment as coatings still remains an active area of research. This study investigates the effects of aluminum (Al) addition on the microstructural and tribological behavior of thermally sprayed Al x FeCrMnCoNi coatings. Specifically, Al was added in amounts of 5 wt% and 10 wt% to the base FeCrMnCoNi composition to synthesize Al x FeCrMnCoNi HEA powders using mechanical mixing followed by a solid-state reaction process. Among these, the powder with 10 wt% Al was chosen for deposition using the high-velocity oxy-fuel (HVOF) thermal spray technique to produce AlFeCrMnCoNi high-entropy coatings (HECs). The addition of Al to the FeCrMnCoNi system promoted the formation of duplex (BCC + FCC) phases within the final coating, enhancing its microhardness. Transverse scratch testing revealed cohesive failure of the coatings, with splat delamination occurring at a critical load of 4 N. The tribological performance of the AlFeCrMnCoNi HECs was evaluated under dry sliding conditions up to 350 °C using an Al₂O₃ counter ball. Across all testing temperatures, abrasion was identified as the primary wear mechanism. However, at 350 °C, tribo-chemical reactions contributed significantly to the wear behavior, resulting in the lowest friction coefficient and wear rate observed under the given conditions. Strong emphasis was placed on understanding interfacial phenomena and their correlation with wear behavior to support the design and evaluation of advanced HECs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Chapter 1—A brief history of alloys and the birth of High-Entropy alloys
2. Yeh M.C.G.J., Liaw P.K. and Zhang Y. High-Entropy Alloys.
3. A review on high entropy alloys coatings: fabrication processes and property assessment
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
6. Mechanical performance of the al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications
8. Fatigue behavior of Al0. 5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
9. Fatigue behavior of a wrought Al0. 5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
10. High temperature oxidation behavior of thermal and plasma processed aluminide coated Ti6Al4V alloys10.1016/j.surfcoat.2022.128839 ↗
11. Microstructure and oxidation behavior of new refractory high entropy alloys10.1016/j.jallcom.2013.08.102 ↗
12. Microstructure and properties of age-hardenable AlxCrFe1. 5MnNi0. 5 alloys10.1016/j.msea.2010.05.052 ↗
13. Effects of Al/Si on the oxidation behavior of a TiZrV0. 5Nb0. 5 refractory high entropy alloy at 1000℃10.1016/j.corsci.2023.111527 ↗
14. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution10.1016/j.matchemphys.2005.01.001 ↗
15. Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
16. High-entropy alloys with high saturation magnetization, electrical resistivity, and malleability10.1038/srep01455 ↗
17. Discovery of a superconducting high-entropy alloy10.1103/PhysRevLett.113.107001 ↗
18. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
19. Effect of zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
20. Atomic-size effect and solid solubility of multicomponent alloys10.1016/j.scriptamat.2014.09.010 ↗
21. Effects of al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
22. Tailoring strength and ductility of high-entropy CrMnFeCoNi alloy by adding al10.1007/s12598-018-1161-4 ↗
23. Effect of al addition on the microstructural evolution of equiatomic CoCrFeMnNi alloy10.1007/s12666-018-1443-4 ↗
24. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
25. Intrinsic surface hardening and precipitation kinetics of Al0. 3CrFe1. 5MnNi0. 5 multi-component alloy10.1016/j.jallcom.2012.09.133 ↗
26. The adhesion of metals and factors that influence it10.1016/0043-1648(64)90050-X ↗
27. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
28. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
29. Hardness and strength enhancements of CoCrFeMnNi high-entropy alloy with nd doping10.1016/j.msea.2019.138192 ↗
30. Applied surface science wear resistance of FeCoCrNiMnAl x high-entropy alloy coatings at high temperature10.1016/j.apsusc.2020.145736 ↗
31. Effect of atomic size difference on the microstructure and mechanical properties of high-entropy alloys10.3390/e20120967 ↗
32. Microstructure, mechanical properties, scratch responses and wear behaviours of transition metal nitride and high entropy alloy coatings
33. Effect of al content on phase compositions of FeNiCoCrMo0. 5Al x high entropy alloy10.3390/met11111734 ↗
34. Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy10.1016/j.jallcom.2020.158592 ↗
35. Achieving excellent mechanical and robust lubrication behavior in the CoCrNi medium-entropy alloy via in-situ graphite10.1016/j.carbon.2024.119503 ↗
36. Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite10.1016/j.compositesb.2024.111222 ↗
37. Qiu · AC J. Alloy. Compd. · 2017
38. Improved mechanical properties and oxidation resistance intermetallics10.1016/j.intermet.2017.05.015 ↗
39. surface & coatings technology wear behavior of HVOF-sprayed al 0. 6 TiCrFeCoNi high entropy alloy coatings at different temperatures surf10.1016/j.surfcoat.2018.11.052 ↗
40. Slurry erosion resistance of laser clad NiCoCrFeAl3 high-entropy alloy coatings10.1080/10402004.2015.1044148 ↗
41. Formation of core–shell structure in high entropy alloy coating by laser cladding10.1016/j.apsusc.2015.12.059 ↗
42. Machining performance of sputter-deposited (Al0. 34Cr0. 22Nb0. 11Si0. 11Ti0. 22) 50N50 high-entropy nitride coatings10.3390/coatings5030312 ↗
43. Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized by sputter deposition10.1080/21663831.2015.1048904 ↗
44. Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating10.1007/s11665-016-2396-6 ↗
45. First report on cold-sprayed AlCoCrFeNi high-entropy alloy and its isothermal oxidation10.1557/jmr.2019.38 ↗
46. Electrochemical deposition and microstructural characterization of AlCrFeMnNi and AlCrCuFeMnNi high entropy alloy thin films10.1016/j.apsusc.2015.07.142 ↗
47. Laser assisted high entropy alloy coating on aluminum: microstructural evolution10.1063/1.4895137 ↗
48. Microstructure and wear resistance of AlCoCrFeNiTi high-entropy alloy coatings produced by HVOF10.3390/coatings7090144 ↗
49. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures surf10.1016/j.surfcoat.2018.11.052 ↗
50. HVOF sprayed WC–Co coatings: microstructure, mechanical properties and friction moment prediction10.1016/j.matdes.2009.08.037 ↗
51. Tribological performance of high-entropy coatings (HECs): a review10.3390/ma15103699 ↗
52. A review on high entropy alloys coatings: fabrication processes and property assessment10.1002/adem.201900343 ↗
53. Thermal spray high-entropy alloy coatings: a review10.1007/s11666-020-01047-0 ↗
54. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
55. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
56. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
57. Dry sliding friction and wear behavior of HVOF sprayed FeCrMnCoNi high entropy coatings (HECs) at room and elevated temperatures10.1016/j.surfcoat.2025.132138 ↗
58. Microstructural and tribological behavior of thermal spray CrMnFeCoNi high entropy alloy coatings
59. Enhanced wear resistance of AlCoCrFeMo high entropy coatings (HECs) through various thermal spray techniques10.1016/j.surfcoat.2023.130311 ↗
60. ASTM-E2109-01, Standard test methods for determining area percentage porosity in thermal sprayed coatings, 2014.
61. EN ISO 4516: 2002, Metallic and other inorganic coatings - Vickers and Knoop microhardness tests, 2004.
62. Interesting aspects of indentation and scratch methods for characterization of thermally-sprayed coatings10.1016/j.surfcoat.2010.08.086 ↗
63. Effect of Carbon Fiber Orientation when Cold Spraying Metallic Powders onto Carbon Fiber-Reinforced Polymers10.1007/s11666-024-01727-1 ↗
64. N-Heterocyclic carbene-promoted copper powder conditioning for thermal spray applications10.1039/D4TA07631A ↗
65. Microstructural analysis and tribological characteristics of thermally sprayed Co-Ni-O ternary oxide coatings10.1016/j.jeurceramsoc.2024.116850 ↗
66. Friction and wear behavior of suspension plasma sprayed tantalum oxide coatings at elevated temperatures10.1016/j.surfcoat.2022.129097 ↗
67. Microstructural evolution and tribological behavior of suspension plasma sprayed CuO as high-temperature lubricious coatings10.1016/j.wear.2023.204874 ↗
68. Environmentally friendly bonded MoS2 solid film lubricants for aerospace applications: closing the gap
69. Tribological evaluation of Lead-Free MoS2-Based solid film lubricants as environmentally friendly replacements for aerospace applications10.3390/lubricants10010007 ↗
70. Enhanced wear resistance of cobalt oxide over nickel oxide tribol
71. Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying surf10.1016/j.surfcoat.2020.125430 ↗
72. Reducibility of oxides and sulphides in metallurgical processes
73. Microstructure and mechanical properties of tribaloy coatings deposited by high-velocity oxygen fuel10.1007/s10853-022-07843-z ↗
74. Can scratch testing be used as a model for the abrasive wear of hard coatings?10.1016/S0043-1648(99)00207-0 ↗
75. Khan N.A. ,Entropy Alloy ( HEA) and High Entropy Ceramic ( HEC) Thin Films Naveed Aziz Khan The University of Sydney, 2021.
76. Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections10.1016/j.triboint.2011.04.002 ↗
77. Influence of HVOF spraying parameters on microstructure and mechanical properties of FeCrMnCoNi high-entropy coatings (HECs)
78. Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating
79. Dandelion-like α-MnO2 hollow spheres with superior catalytic performance for Li-O2 batteries by a facile in situ pyrolysis10.1007/s10853-018-2629-1 ↗
80. Spherical α-MnO2 supported on N-KB as efficient electrocatalyst for oxygen reduction in Al–Air battery
81. Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite10.1016/j.matdes.2016.11.072 ↗
82. A phenomenological theory of sintering10.1088/0370-1301/62/12/310 ↗
83. E.A. Films, Effects of Al Addition on Microstructures and Mechanical Properties of CoCrFeMnNiAl x High, 2020, pp. 1–11.
84. Effects of al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
85. Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering10.1016/j.vacuum.2020.109706 ↗
86. Davis · 2004
87. Cryogenic deformation mechanism of CrMnFeCoNi high-entropy alloy fabricated by laser additive manufacturing process
88. Microstructure and properties of MgMoNbFeTi2Yx high entropy alloy coatings by laser cladding10.1016/j.surfcoat.2020.126303 ↗
89. Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: application to PEEK10.1016/j.ijsolstr.2019.08.021 ↗
90. Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr10.1016/j.wear.2003.07.002 ↗
91. Warm spraying—a novel coating process based on high-velocity impact of solid particles10.1088/1468-6996/9/3/033002 ↗
92. Subsonic-flame-sprayed CoCrFeNi, AlCoCrFeNi and MnCoCrFeNi-based high-entropy alloy coatings and their tribological behaviors10.1007/s11666-022-01493-y ↗
93. TiC–NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2–NiCr10.1016/j.wear.2020.203273 ↗
94. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
95. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
96. The temperature of rubbing surfaces10.1016/0043-1648(59)90159-0 ↗
97. Modification of Archard’s equation by taking account of elastic/pseudoelastic properties of materials10.1016/S0043-1648(01)00711-6 ↗
98. Tribological behaviors and microstructure evolution of inconel 718 superalloy at mid-high temperature10.1016/j.jmrt.2021.07.102 ↗
99. Wear behaviour of thermally sprayed ceramic oxide coatings10.1016/j.wear.2006.03.023 ↗
100. Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatings10.1016/j.wear.2011.12.001 ↗