Transformation twins enable high strength-ductility synergy in a lamellar Ti-55531 alloy: Variant selection and deformation mechanisms
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Perspectives on Titanium Science and Technology10.1016/j.actamat.2012.10.043 ↗
2. The Use of β Titanium Alloys in the Aerospace Industry10.1361/105994905X75448 ↗
3. Enhancing strength-ductility synergy via hierarchical microstructure in fine-grained Ti-10Mo-8V-1Fe-3.5Al alloy10.1016/j.matlet.2022.132690 ↗
4. Enhanced mechanical properties of Ti-5Al-5Mo-5V-3Cr-1Zr by bimodal lamellar precipitate microstructures via two-step aging10.1016/j.msea.2021.142117 ↗
5. Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing10.1016/j.mtla.2019.100479 ↗
6. Deformation behaviors of a hot rolled near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.msea.2018.11.035 ↗
7. Influence of duplex ageing on secondary α precipitates and mechanical properties of the near β-Ti alloy Ti-5553110.1016/j.matchar.2018.06.025 ↗
8. Fracture toughness of Ti–22Al–25Nb alloy at room and high temperatures10.1016/j.msea.2020.140009 ↗
9. Influence of microstructure on fatigue crack growth behavior of Ti–6Al–3Nb–2Zr–1Mo alloy: Bimodal vs. lamellar structures10.1016/j.intermet.2020.107058 ↗
10. The dynamic responses of lamellar and equiaxed near β-Ti alloys subjected to multi-pass cross rolling10.1016/j.jmst.2019.10.017 ↗
11. Tensile and fracture toughness of high strength β Titanium alloy, Ti–10V–2Fe–3Al, as a function of rolling and solution treatment temperatures10.1016/j.matdes.2012.11.053 ↗
12. Face centered cubic substructure and improved tensile property in a novel β titanium alloy Ti–5Al–4Zr–10Mo–3
13. Hierarchical structure and deformation behavior of a novel multicomponent β titanium alloy with ultrahigh strength10.1016/j.jmst.2021.08.031 ↗
14. Heterogeneous precipitate microstructure in titanium alloys for simultaneous improvement of strength and ductility10.1016/j.jmst.2022.02.025 ↗
15. Heterostructures enhance simultaneously strength and ductility of a commercial titanium alloy10.1016/j.actamat.2023.119182 ↗
16. Tensile brittleness and ductility improvement in a novel metastable β titanium alloy with lamella structure10.1016/j.jallcom.2020.154311 ↗
17. A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: The superior combination of strength and ductility10.1016/j.matdes.2019.107640 ↗
18. Graded hierarchical microstructure and mechanical property of electron beam melted Ti–5Al–5Mo–5V–3Cr–1Zr10.1016/j.msea.2021.141914 ↗
19. Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties10.1016/j.msea.2019.138077 ↗
20. Heterogeneous precipitate microstructure design in β-Ti alloys by regulating the cooling rate10.1016/j.actamat.2024.119810 ↗
21. Martensitic transformation in zirconium-niobium alloys10.1016/0001-6160(71)90068-X ↗
22. Effect of molybdenum on microstructures in Zr-1.2Nb alloys after β-quenching and subsequently 873K annealing10.1016/j.matdes.2016.05.047 ↗
23. Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation10.1016/j.actamat.2017.04.051 ↗
24. Phase transformation generating coherent twin boundaries in titanium alloys10.1016/j.matlet.2022.132515 ↗
25. Balancing strength and ductility by controllable heat-treatment twinning in a near β-Ti alloy10.1016/j.jmrt.2020.04.045 ↗
26. Non-classical homogeneous precipitation mediated by compositional fluctuations in titanium alloys10.1016/j.actamat.2012.07.033 ↗
27. Influence of microstructure on cyclic deformation response and micromechanics of Ti–55531 alloy10.1016/j.msea.2020.140505 ↗
28. Isothermal kinetics of β↔α transformation in Ti-55531 alloy influenced by phase composition and microstructure10.1016/j.matdes.2017.05.078 ↗
29. Strength and fracture toughness of TC21 alloy with multi-level lamellar microstructure10.1016/j.msea.2018.10.056 ↗
30. Fracture toughness of high-strength bimodal Ti-5553 titanium alloy with pancake-shape prior β grain10.1016/j.msea.2024.146912 ↗
31. Controlling the microstructure and fracture toughness of the Ti–5Al–5Mo–5V–1Cr–1Fe alloy by multiple heat treatments10.1016/j.jmrt.2022.02.020 ↗
32. Microstructure−fracture toughness relationships and toughening mechanism of TC21 titanium alloy with lamellar microstructure10.1016/S1003-6326(18)64890-3 ↗
33. Microstructural dependence of strength and ductility in a novel high strength β titanium alloy with Bi-modal structure10.1016/j.msea.2019.138086 ↗
34. ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy10.1016/j.actamat.2009.01.007 ↗
35. Effects of cold pre-deformation on aging behavior and mechanical properties of Ti-1300 alloy10.1016/j.jallcom.2014.09.064 ↗
36. Simultaneous improvement of strength and elongation of laser melting deposited Ti-6Al-4V titanium alloy through three-stage heat treatment10.1016/j.jmatprotec.2022.117607 ↗
37. Excellent strength-ductility synergy in a novel metastable β Ti alloy via architecting an unusual hierarchical structure10.1016/j.msea.2024.146086 ↗
38. Constructing a novel bi-lamellar microstructure in selective laser melted Ti-6Al-4V alloy via electropulsing for improvement of strength and corrosion resistance10.1016/j.jmst.2023.12.060 ↗
39. Effects of crystallographic orientation and lamellar configuration on fatigue crack propagation in single-colony structures of Ti–6Al–4V alloy: Alternating shear crack growth vs. damage accumulation crack propagation10.1016/j.msea.2023.145885 ↗
40. Strength enhancement of a bi-lamellar PM Ti–6Al–4V alloy without sacrificing ductility by Al partitioning and twinning-induced plasticity effect10.1016/j.msea.2021.142368 ↗
41. Microstructural evolution, mechanical properties and fracture toughness of near β titanium alloy during different solution plus aging heat treatments10.1016/j.jallcom.2019.07.134 ↗
42. Synergistic influence mechanism of microstructure type and loading mode on the long crack propagation in Ti-55531 alloy10.1016/j.engfracmech.2022.108404 ↗
43. Microstructure design and mechanical properties in a near-α Ti–4Mo alloy10.1016/j.actamat.2015.06.043 ↗
44. Effects of subtransus triplex heat treatments on the microstructure and mechanical behaviors of a Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.msea.2022.144207 ↗
45. Composition dependent crystallography of α″-martensite in Ti–Nb-based β-titanium alloy10.1080/14786430601003874 ↗
46. Tensile deformation mechanism and micro-void nucleation of Ti-55531 alloy with bimodal microstructure10.1016/j.jmrt.2020.11.008 ↗
47. Twinning during β→α slow cooling in a zirconium alloy10.1016/j.scriptamat.2012.06.032 ↗
48. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy10.1016/j.actamat.2014.06.064 ↗
49. Diffusional-displacive transformation in a metastable β titanium alloy and its strengthening effect10.1016/j.actamat.2020.05.058 ↗
50. An algorithm for automatic identification of double twin variants in Mg alloys10.1016/j.matchar.2018.04.028 ↗
51. Variant selection of α precipitates formed at β triple junctions in titanium alloy10.1016/j.matchar.2022.111975 ↗
52. Influence of alternate grain boundary α on the development of Widmanstätten microstructure in TC21 Ti alloy10.1016/j.matchar.2021.111162 ↗
53. Variant selection of {10-12}-{10-12} double twins during the tensile deformation of an AZ31 Mg alloy10.1016/j.msea.2017.05.105 ↗
54. Accommodative 101̅2 twins at high angle grain boundaries in rolled pure titanium10.1016/j.scriptamat.2016.02.005 ↗
55. Deformation Twinning in Nanocrystalline Metals10.1361/105994905X56269 ↗
56. In-situ study on tensile deformation and damage evolution of metastable β titanium alloy with lamellar microstructure10.1016/j.msea.2021.141790 ↗
57. Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy10.1016/j.jallcom.2018.12.262 ↗
58. Lamellar α fencing effect for improving stress relaxation resistance in Ti-55511 alloy10.1016/j.msea.2021.140945 ↗
59. Cyclic deformation responses in α-phase of a lamellar near β-Ti alloy10.1016/j.msea.2020.139994 ↗
60. Three dimensional crystallographic orientation relationships for hexagonal close packed structure to face centered cubic structure transformation in pure titanium10.1016/j.scriptamat.2019.05.010 ↗
61. Formation of nanocrystalline b structure in metastable beta Ti alloy during high pressure torsion: The role played by stress induced martensitic transformation10.1016/j.actamat.2015.06.042 ↗
62. Effect of the severe plastic deformation by ECAP on microstructure and phase transformations in Ti-15Mo alloy
63. Phase transformation and structural evolution in a Ti-5at% Al alloy induced by cold-rolling10.1016/j.jmst.2020.02.032 ↗