Microstructure evolution and mechanical behavior of a heat-treated Ni-based superalloy AMSC-DB fabricated by laser direct energy deposition
Source abstract
Abstract
The microstructure and mechanical behavior of a printable AMSC-DB superalloy fabricated by laser direct energy deposition (LDED) have been systematically investigated in this work. The microstructural evolution of alloy samples was characterized in their as-printed (AP), direct-aged (DA) and solutioned and aged (SA) states, with the tensile tests conducted at both ambient temperature and 900 ºC. The γ’ precipitates in AP condition are small and round in shape, whereas in the DA condition they show a significant bimodal particle size distribution. In contrast, in the SA condition the γ’ particles possess the well-assembled uniform cubic shape. The carbides in the AP and the DA conditions display similar spatial skeleton structure; however, in the SA condition the carbides undergo partial dissolution turning into a structure of isolated particles. The tensile test results at ambient temperature show that the AP condition possess the highest UTS of around 1237 MPa, superior to the DA and SA conditions. Meanwhile, best ductility can be obtained in SA condition, with the total elongation reaching 22.1 %. The fracture analysis of the samples in all conditions after tensile testing confirm that ductile fracture is the dominant failure mode. The dislocation pairs shearing γ’ particles are consistently detected as the main deformation mechanism, while stacking faults are exclusively observed in small-size γ’ phases in AP and DA conditions. For the mechanical properties at 900 ºC, samples treated under the SA condition show the highest UTS of 585 MPa with the lowest elongation of 7.7 %, while the AP condition presents the highest ductility with the lowest strength. The fracture surfaces of samples in the AP, DA and SA conditions present semi-brittle features at 900 ºC test. Well-aligned γ’ particles in SA condition more effectively hinder the dislocation gliding and climbing, facilitating the localized dislocation accumulation. The present work provides insights into the microstructures and mechanical responses obtained via different post-printing processing strategies in Ni-based superalloys fabricated by additive manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Additive manufacturing of nickel superalloys: opportunities for innovation and challenges related to qualification10.1007/s11661-018-4702-4 ↗
3. Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
4. A defect-resistant Co-Ni superalloy for 3D printing10.1038/s41467-020-18775-0 ↗
5. Additive manufacturing of nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship10.1016/j.pmatsci.2023.101108 ↗
6. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
7. Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges
8. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
9. Heat Treatment · 2020
10. Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion, in: ASTM F3055-14a, ASTM International, West Conshohocken, PA, USA, 2021.
11. Additive manufacturing of structural materials10.1016/j.mser.2020.100596 ↗
12. Alloy design via additive manufacturing: advantages, challenges, applications and perspectives10.1016/j.mattod.2021.11.026 ↗
13. Effect of heat treatments on Inconel 625 fabricated by wire and arc additive manufacturing: an in situ synchrotron X-ray diffraction analysis10.1080/13621718.2023.2187927 ↗
14. Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: precipitation reactions and incipient recrystallisation
15. Improved properties of additively prepared Inconel 718 alloy post-processed with a new heat treatment10.1016/j.msea.2024.146930 ↗
16. Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
17. Heat treatments design for superior high-temperature tensile properties of Alloy 625 produced by selective laser melting10.1016/j.msea.2020.139720 ↗
18. Effect of homogenization heat treatments on the cast structure and tensile properties of nickel-base superalloy ATI 718Plus in the presence of boron and zirconium additions10.1016/j.msea.2017.02.047 ↗
19. Role of heat treatment and build orientation in the microstructure sensitive deformation characteristics of IN718 produced via SLM additive manufacturing
20. Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion10.1016/j.actamat.2018.03.017 ↗
21. A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization10.1016/j.mtla.2020.100835 ↗
22. Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718
23. The effect of direct aging treatment on microstructure and mechanical properties of the GH4099 superalloys produced by selective laser melting10.1016/j.jallcom.2024.176493 ↗
24. Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion10.1016/j.msea.2017.02.038 ↗
25. Microstructure and mechanical properties of laser powder bed-fused IN625 alloy10.1016/j.msea.2019.138481 ↗
26. Tensile deformation behavior of laser powder direct energy deposited Inconel 625: cryogenic to elevated temperatures10.1016/j.msea.2023.145826 ↗
27. Effect of solid-solution treatment on high-temperature properties and creep fracture mechanism of laser powder bed fused Inconel 625 alloy10.1016/j.msea.2024.146592 ↗
28. Strengthening mechanisms in selective laser-melted Inconel718 superalloy10.1016/j.msea.2021.141145 ↗
29. Deformation behavior of selective laser-melted Inconel 718 superalloy10.1016/j.matchar.2024.114180 ↗
30. Arc-based directed energy deposited Inconel 718: role of heat treatments on high-temperature tensile behavior10.1080/21663831.2023.2297734 ↗
31. Temperature dependence tensile behaviors of additively manufactured GH4099 Ni-based superalloy10.1016/j.msea.2024.146464 ↗
32. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy10.1016/j.jallcom.2018.03.366 ↗
33. Additive manufacturing of CMSX-4 Ni-base superalloy by selective laser melting: influence of processing parameters and heat treatment
34. Direct laser metal deposition of Inconel 73810.1016/j.msea.2018.10.020 ↗
35. Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting10.1016/j.matdes.2021.109940 ↗
36. Robust additive manufacturable Ni superalloys designed by the integrated optimization of local elemental segregation and cracking susceptibility criteria10.1016/j.actamat.2024.119658 ↗
37. The dissolution behaviors of carbides during solution treatment for AMSC-DB Ni-based superalloys fabricated by laser-directed energy deposition and forging10.1002/adem.202400700 ↗
38. , High-performance Ni-based superalloy 718 fabricated via arc plasma directed energy deposition: effect of post-deposition heat treatments on microstructure and mechanical properties
39. Intermediate temperature brittleness in a directionally solidified nickel-based superalloy M470610.1016/j.msea.2019.05.037 ↗
40. Low ductility at intermediate temperature of Ni–base superalloy M96310.1016/j.msea.2004.03.057 ↗
41. Anderson · 2005
42. Tensile deformation mechanisms at various temperatures in a new directionally solidified Ni-base superalloy10.1016/j.jallcom.2016.09.303 ↗
43. Temperature dependence on tensile deformation mechanisms in a novel Nickel-based single crystal superalloy10.1016/j.msea.2020.138997 ↗
44. Tensile behaviors and deformation mechanisms of a nickel-base single crystal superalloy at different temperatures10.1016/j.msea.2014.01.001 ↗