Accomplishing the goal of yield isotropy in magnesium with dilute nickel addition and two-pass extrusion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Uncovering the unexpected changes of creep properties in AZ-series Mg alloys10.1016/j.msea.2022.144056 ↗
2. The evolution of yield loci with finite plastic deformation along proportional and non-proportional loading paths in an annealed extruded AZ31 magnesium alloy
3. Effect of billet diameter on hot extrusion behavior of Mg-Al-Zn alloys and its influence on microstructure and mechanical properties10.1016/j.jallcom.2016.08.144 ↗
4. Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling10.1016/j.ijplas.2019.07.011 ↗
5. Effects of yttrium content on the three-dimensional compressive creep anisotropy of Mg-Y alloys10.1007/s11661-021-06352-z ↗
6. Damage analysis of hot-rolled AZ31 Mg alloy sheet during uniaxial tensile testing under different loading directions10.1016/j.msea.2017.10.108 ↗
7. An evolution of subsequent yield loci under proportional and non-proportional loading path of ‘as-received’ extruded AZ31 magnesium alloy: experiments and CPFEM modeling10.1016/j.ijplas.2022.103216 ↗
8. Unlocking the mechanism for achieving excellent thermal stability in ultra-thin AZ61 Mg alloy foil10.1007/s11661-023-07296-2 ↗
9. Microstructure, mechanical properties and corrosion properties of Mg-4Zn-xNi alloys for degradable fracturing ball applications10.1016/j.jallcom.2019.02.089 ↗
10. A review on magnesium alloys for application of degradable fracturing tools10.1016/j.jma.2022.09.032 ↗
11. Enhanced degradation properties of Mg-Y-Ni alloys by tailoring the LPSO morphology for fracturing tools applications10.1016/j.matchar.2021.111489 ↗
12. Effects of twinning time node on the creep properties of dilute Mg–Y alloy10.1016/j.msea.2020.140309 ↗
13. Enhanced corrosion rate for Mg-xEr-1.6Ni alloys with high Er content by regulating the second phase via short-time low-temperature heat treatment10.1016/j.corsci.2023.111227 ↗
14. Underlying mechanisms of drastic reduction in yield asymmetry of extruded Mg-Sn-Zn alloy by Al addition10.1016/j.msea.2018.07.063 ↗
15. Investigation of rapidly decomposable AZ91-RE-xCu (x=0, 1, 2, 3, 4) alloys for petroleum fracturing balls10.1016/j.jpcs.2020.109499 ↗
16. New technologies enhance efficiency of horizontal, multistage fracturing10.2118/0411-0026-JPT ↗
17. Variation in bending deformation behavior and improvement in bendability of extruded pure Mg through Gd addition10.1016/j.msea.2022.143940 ↗
18. Overcoming the trade-off between stretch formability and heat resistance in magnesium via alloying dilute neodymium10.1016/j.jallcom.2021.162666 ↗
19. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
20. Deformation and fracture mechanisms in WE43 magnesium-rare earth alloy fabricated by direct-chill casting and rolling10.1016/j.msea.2018.04.090 ↗
21. Development of a high-strength Mg–11Gd–2Ag (wt%) alloy sheet with extra-low anisotropy10.1016/j.msea.2021.141084 ↗
22. Effects of accumulative rolling reduction on the microstructure characteristic and mechanical properties of Mg-Gd-Y-Zn-Zr sheets processed by hot rolling10.1016/j.msea.2019.138317 ↗
23. Plastic anisotropy and deformation behavior of extruded Mg-Y sheets at elevated temperatures10.1016/j.msea.2017.06.047 ↗
24. Tension-compression asymmetry in hot-rolled Mg-3wt%Gd alloy under creep loading10.1016/j.msea.2021.142124 ↗
25. Deformation behavior of Mg–Zn–Y alloys reinforced by icosahedral quasicrystalline particles10.1016/S1359-6454(02)00067-8 ↗
26. Enhanced grain boundary cohesion mediated by solute segregation in a dilute Mg alloy with improved crack tolerance and strength10.1016/j.ijplas.2024.103950 ↗
27. Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets10.1016/j.jallcom.2010.11.141 ↗
28. Enhancement of tensile ductility and stretch formability of AZ31 magnesium alloy sheet processed by cross-wavy bending10.1016/j.jallcom.2013.06.185 ↗
29. Enhancement of tensile ductility of magnesium alloy produced by torsion extrusion10.1016/j.scriptamat.2008.04.013 ↗
30. Static recrystallization and mechanical properties of Mg-4Y-3RE magnesium alloy sheet processed by differential speed rolling at 823 K10.1016/j.msea.2012.01.044 ↗
31. Microstructure, mechanical properties, and corrosion behavior of degradable Mg-Al-Cu-Zn-Gd alloys10.1016/j.jallcom.2016.05.288 ↗
32. Improving the corrosion resistance of MgZn1.2GdxZr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions10.1016/j.corsci.2020.108962 ↗
33. Phase equilibria of the long-period stacking ordered phase in the Mg–Ni–Y system10.1016/j.intermet.2014.10.014 ↗
34. Degradation behavior of Mg-4Zn-2Ni alloy with high strength and high degradation rate10.1016/j.matchemphys.2020.123131 ↗
35. Effects of alloying elements on microstructure and properties of magnesium alloys for tripling ball10.1007/s11661-015-3053-7 ↗
36. Effect of the morphology of long-period stacking ordered phase on mechanical properties and corrosion behavior of cast Mg-Zn-Y-Ti alloy10.1016/j.jallcom.2018.06.056 ↗
37. Effect of alloyed Sr on the microstructure and corrosion behavior of biodegradable Mg-Zn-Mn alloy in Hanks’ solution10.1016/j.corsci.2019.06.022 ↗
38. Enhanced mechanical properties and degradation rate of Mg-3Zn-1Y based alloy by Cu addition for degradable fracturing ball applications10.1016/j.matlet.2017.02.024 ↗
39. Anisotropy in the tensile creep behaviors of a hot-rolled Mg-5.5 wt%Y alloy sheet10.1016/j.matchar.2020.110843 ↗
40. Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance10.1016/j.jallcom.2022.165046 ↗
41. Anisotropy of the extruded and heat-treated Li containing AZ31 magnesium alloys10.1016/j.jallcom.2013.12.069 ↗
42. Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2020.140596 ↗
43. Deformation behavior of Mg–Zn–Zr magnesium alloy on the basis of macro-texture and fine-grain size under tension and compression loading along various directions10.1016/j.jallcom.2020.157740 ↗
44. Deformation of extruded ZK60 magnesium alloy under uniaxial loading in different material orientations10.1016/j.msea.2017.10.059 ↗
45. Effect of aging precipitation on mechanical anisotropy of an extruded Mg–Y–Nd alloy10.1016/j.matdes.2011.08.043 ↗
46. Effect of differential speed rolling on the anisotropy of mechanical properties and texture evolution of AZ31 Mg alloys10.1016/j.jallcom.2010.03.186 ↗
47. Effect of final rolling reduction on the microstructure and mechanical properties of Mg–Gd–Y–Zn–Zr alloy sheets10.1016/j.msea.2012.08.089 ↗
48. Effect of icosahedral phase on crystallographic texture and mechanical anisotropy of Mg–4%Li based alloys10.1016/j.jmst.2016.10.003 ↗
49. Effect of icosahedral phase on the crystallographic texture and mechanical anisotropy of duplex structured Mg–Li alloys10.1016/j.matdes.2015.08.123 ↗
50. Effect of unidirectional rolling and cross-rolling on microstructure and mechanical anisotropy of Mg-Gd-Y-Ag-Zr plates10.1016/j.jallcom.2023.170680 ↗
51. Effects of icosahedral phase on mechanical anisotropy of as-extruded Mg-14Li (in wt%) based alloys10.1016/j.jmst.2019.07.028 ↗
52. Microstructure and anisotropic mechanical behavior of the high-strength and ductility AZ91 Mg alloy processed by hot extrusion and multi-pass RD-ECAP10.1016/j.msea.2020.139191 ↗
53. Microstructure and mechanical properties of thin ZK61 magnesium alloy sheets by extrusion and multi-pass rolling with lowered temperature10.1016/j.jmatprotec.2016.06.005 ↗
54. Microstructure, texture and mechanical anisotropy of Mg-Gd-Y-Zr sheets processed via different rolling routes and reductions10.1016/j.matchar.2020.110120 ↗
55. Microstructures and mechanical properties of high-strength Mg–Gd–Y–Zn–Zr alloy sheets processed by severe hot rolling10.1016/j.jallcom.2012.02.050 ↗
56. On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling10.1016/j.jmst.2019.05.076 ↗
57. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
58. Relationship between work hardening capacity and compressive creep behavior in a hot-extruded Mg–6Al–1Zn alloy rod10.1007/s11661-021-06578-x ↗
59. The microstructure evolution and mechanical anisotropy of extruded Mg-2Zn-0.4Ce-0.4Mn alloy tube during tension in different directions10.1016/j.jallcom.2021.159829 ↗
60. The relationship between macro-fracture modes and roles of different deformation mechanisms for the as-extruded Mg–Zn–Zr alloy10.1016/j.scriptamat.2008.02.013 ↗
61. The role of long-period stacking ordered phases in the deformation behavior of a strong textured Mg-Zn-Gd-Y-Zr alloy sheet processed by hot extrusion10.1016/j.msea.2019.02.040 ↗
62. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
63. Why rolled Mg-Al-Ca-Mn alloys are less responsive to aging as compared to the extruded10.1016/j.scriptamat.2023.115513 ↗
64. A novel Mg-Gd-Y-Zn-Cu-Ni alloy with excellent combination of strength and dissolution via peak-aging treatment10.1016/j.jma.2022.05.012 ↗
65. Effect of trace Ni addition on microstructure, mechanical and corrosion properties of the extruded Mg–Gd–Y–Zr–Ni alloys for dissoluble fracturing tools10.1016/j.jma.2020.08.019 ↗
66. Effects of copper on the microstructure and properties of Mg-17Al-3Zn alloys
67. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature10.1007/s11661-005-0032-4 ↗
68. Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature10.1016/j.actamat.2005.01.008 ↗
69. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys10.1016/S1359-6454(03)00005-3 ↗
70. A critical thermodynamic assessment of the Mg–Ni, Ni–Y binary and Mg–Ni–Y ternary systems10.1016/j.calphad.2009.01.001 ↗
71. Experimental investigation and thermodynamic calculation of the Mg-Ni-Y system (Y < 50 at%) at 400 and 500 °C10.1016/j.jallcom.2015.07.202 ↗
72. A comprehensive diffusion mobility database comprising 23 elements for magnesium alloys10.1016/j.actamat.2020.09.079 ↗
73. Tailoring the degradation rate of magnesium-lithium alloy with alloying elements of gadolinium and nickel10.1016/j.jallcom.2023.173115 ↗
74. On the structure, transformation and deformation of long-period stacking ordered phases in Mg-Y-Zn alloys10.1007/s11661-014-2301-6 ↗
75. Improved strength in wrought Mg–Y–Ni alloys by adjusting the block-shaped LPSO phase and plate-shaped γ′ phase10.1016/j.msea.2021.142198 ↗
76. Ultrahigh strength Mg-Y-Ni alloys obtained by regulating second phases10.1016/j.jmst.2019.11.026 ↗
77. Optimizing the mechanical properties of a Mg–Y–Nd–Zn–Zr alloy via interrupted compression with an intermediate annealing10.1016/j.msea.2021.141102 ↗
78. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
79. Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn10.1016/j.actamat.2019.02.010 ↗
80. Superior strength-ductility synergy of Mg-Nd-Zn-Zr alloy rod achieved by drawing at elevated temperatures10.1016/j.ijplas.2024.103944 ↗
81. Investigation of crossed-twin structure formation in magnesium and magnesium alloys10.1016/j.jallcom.2022.168094 ↗
82. Enhancing the creep resistance of a dilute Mg-1.5 wt%Nd alloy plate via pre-compression and subsequent peak-aging10.1016/j.jallcom.2020.158590 ↗
83. Influence of grain size on hot working stresses and microstructures in Mg-3Al-lZn10.1016/j.scriptamat.2004.03.023 ↗
84. Origin of the anomalous {10-12} twinning during tensile deformation of Mg alloy sheet10.2320/matertrans.MRA2008283 ↗
85. Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading10.1016/j.ijplas.2014.08.010 ↗
86. Statistical analyses of deformation twinning in magnesium10.1080/14786431003630835 ↗
87. Enhancing creep properties of a hot-rolled Mg-4Y binary alloy via a new thought of inhibiting cross-slip10.1016/j.matchar.2018.10.019 ↗
88. Hall-Petch relation for deformation twinning in solid solution magnesium alloys10.1016/j.msea.2012.10.040 ↗
89. Unveiling the effect of Gd content on the dynamic recrystallization behavior and resultant mechanical property of magnesium10.1016/j.msea.2023.145523 ↗
90. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
91. Effect of rolling reduction on microstructure, texture, mechanical properties and mechanical anisotropy of AZ31 magnesium alloys10.1016/j.msea.2014.06.034 ↗
92. Tracing the effects of calcium, stannum, and zinc additions on the creep resistance of Mg-Al-based alloys10.1007/s11661-023-07050-8 ↗
93. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
94. Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach10.1016/j.actamat.2019.12.012 ↗
95. Roles of deformation twinning and dislocation slip in the fatigue failure mechanism of AZ31 Mg alloys10.1016/j.scriptamat.2010.03.021 ↗
96. Texture effect on microyielding of wrought magnesium alloy AZ3110.1016/j.msea.2011.01.046 ↗
97. Twinning-induced negative strain rate sensitivity in wrought Mg alloy AZ3110.1016/j.msea.2011.04.059 ↗