Enhanced mechanical properties and biocompatibility of a Ti-Zr-Cu-Pd bulk metallic glass by annealing within the supercooled liquid region
Source abstract
Abstract
Bulk metallic glasses (BMGs) possess higher strength than crystalline alloys because crack propagation is halted through a grain boundary-, crystal defect-free amorphous structure. Nanocrystal inclusions can further enhance mechanical properties. Here we investigate how the formation of nanocrystals into a Ti 41.2 Zr 10.6 Cu 39.1 Pd 9.1 BMG matrix via controlled annealing that leads to devitrification of the bulk microstructure, as well as chemical changes to the surface oxide layer, affects mechanical and biological performance. The BMG nanocrystalline composite (BMGC, 12.8% crystallinity produced via annealing at 415 °C for 5 min, based on crystallisation kinetics studies) was compared to the fully amorphous BMG and the fully crystalline counterpart (annealed at 415 °C and 60 min). BMGC fracture strength (1,374.6 MPa) was higher than that of the amorphous BMG (1,303.1 MPa) and the fully crystalline specimen (644.4 MPa). Young’s moduli correlated negatively with the degree of crystallisation (78.3-66.2 GPa). The results from in vitro tests on MC3T3-E1 illustrate that the surface chemistry plays a crucial role enhancing osteoblastogenesis: the presence of Zr oxides, wettable surfaces and large values of polar component of Surface Free Energy due to the nanocrystals, and a thinner oxide layer with low concentrations of Cu x O, positioned BMGC as the preferred substrate. Tailoring amorphicity-to-crystallinity ratio in a Ti-Zr-Cu-Pd BMG is a route to create multifunctional substrates. • Tailoring the amorphicity-to-crystallinity ratio in a Ti-Zr-Cu-Pd BMG via annealing • Inclusion of nanocrystals within the BMG matrix to increase alloy strength • Concurrent validation including thermo-, mechanical, chemical and biological tests • BMG-Composite outperforms pure amorphous and crystalline counterparts • Enhanced biological performance of BMGC due to surface chemistry and Free Energy
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Polymer Science and Applications · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Mechanical properties and corrosion resistance of large-size biodegradable Ca–Mg–Zn bulk metallic glasses fabricated via powder metallurgy10.1016/j.intermet.2022.107633 ↗
2. Novel Ti-based bulk metallic glass free of toxic and noble elements for bio-implant applications
3. Effect of Ti addition on mechanical properties and corrosion resistance of Ni-free Zr-based bulk metallic glasses for potential biomedical applications10.1016/j.jallcom.2019.152636 ↗
4. Study of mechanical deformation in bulk metallic glass through instrumented indentation10.1016/S1359-6454(01)00263-4 ↗
5. Corrosion properties of Ca based bulk metallic glasses10.2320/matertrans.MJ200732 ↗
6. Centimeter-sized Ti-rich bulk metallic glasses with superior specific strength and corrosion resistance10.1016/j.jnoncrysol.2018.10.034 ↗
7. A new toxic-free Ti40Zr10Co36Pd14 metallic glass with good biocompatibility and surface behaviour comparable to Ti-6Al-4V10.1016/j.matdes.2022.110691 ↗
8. In vitro and in vivo studies on Ti-based bulk metallic glass as potential dental implant material10.1016/j.msec.2013.04.038 ↗
9. Formation and properties of biocompatible Ti-based bulk metallic glasses in the Ti–Cu–Zr–Fe–Sn–Si–Ag system10.1016/j.jnoncrysol.2021.121060 ↗
10. Ti–Zr–Cu–Fe–Sn–Si–Ag–Ta bulk metallic glasses with good corrosion resistance as potential biomaterials10.1007/s12598-018-1124-9 ↗
11. Review on biocompatibility and prospect biomedical applications of novel functional metallic glasses10.3390/jfb13040245 ↗
12. Ti based biomaterials, the ultimate choice for orthopaedic implants–a review10.1016/j.pmatsci.2008.06.004 ↗
13. TiZr-base bulk metallic glass with over 50 mm in diameter10.1016/S1005-0302(10)60077-1 ↗
14. Thermal stability and glass-forming ability of new Ti-based bulk metallic glasses10.1016/j.jnoncrysol.2005.09.033 ↗
15. High strength bulk amorphous alloys with low critical cooling rates (overview)10.2320/matertrans1989.36.866 ↗
16. Helsen · 1998 · 102
17. Mechanical, corrosion, and wear performances of a biocompatible Ti-based glassy alloy10.1016/j.jnoncrysol.2020.120116 ↗
18. Impact of spherulite-type crystalline defects on the mechanical and electrochemical properties of Ti40Cu36Zr10Pd14 metallic glasses10.1016/j.mtla.2022.101353 ↗
19. Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material10.1016/j.matdes.2023.112256 ↗
20. Nano icosahedral quasicrystals in Zr-based glassy alloys10.1016/S0966-9795(02)00142-5 ↗
21. Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass10.1016/j.jmbbm.2011.05.028 ↗
22. Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass10.1016/j.jnoncrysol.2019.119782 ↗
23. Enhanced mechanical properties due to structural changes induced by devitrification in Fe–Co–B–Si–Nb bulk metallic glass10.1016/j.actamat.2010.07.047 ↗
24. Effect of annealing on microstructure and mechanical property of a Ti–Zr–Cu–Pd bulk metallic glass10.1016/j.intermet.2007.04.005 ↗
25. In vitro biocompatibility of equal channel angular processed (ECAP) titanium10.1088/1748-6041/2/3/S06 ↗
26. Study of the structural relaxation-induced embrittlement of hypoeutectic Zr–Cu–Al ternary bulk glassy alloys10.1016/j.actamat.2008.08.026 ↗
27. Biocompatibility study on Ni-free Ti-based and Zr-based bulk metallic glasses10.1016/j.msec.2017.02.006 ↗
28. Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glass
29. Modification of structural, mechanical, corrosion and biocompatibility properties of Ti40Zr10Cu36Pd14 metallic glass by minor Ga and Sn additions10.1016/j.jallcom.2023.168776 ↗
30. New TiZrCuPd quaternary bulk glassy alloys with potential of biomedical applications10.2320/matertrans.MRA2007086 ↗
31. The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds10.1016/j.msec.2017.03.249 ↗
32. Standard · 2019
33. Multidimensional analysis for the correlation of physico-chemical attributes to osteoblastogenesis in TiNbZrSnTa alloys10.1016/j.bioadv.2023.213572 ↗
34. ISO, E., 2019. 19403: Paints and varnishes-Wettability-part 2: determination of the surface free energy of solid surfaces by measuring the contact angle.
35. Correlation between Lewis acid− base surface interaction components and linear solvation energy relationship solvatochromic α and β parameters10.1021/la950725u ↗
36. Thermodynamics and kinetics of the undercooled liquid and the glass transition of the Zr41. 2Ti13. 8Cu12. 5Ni10. 0Be22. 5 alloy10.1063/1.359485 ↗
37. Thermal behavior and non-isothermal crystallization kinetics of (Ti41Zr25Be28Fe6) 93Cu7 bulk metallic glass10.1016/j.jnoncrysol.2016.05.043 ↗
38. Crystallization kinetics of Cu55Hf45 glassy alloy10.1016/j.jnoncrysol.2017.01.021 ↗
39. Non-isothermal kinetics study of primary crystallization in amorphous Al86Ni10Zr2MM2 alloy10.1016/j.jnoncrysol.2017.04.010 ↗
40. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
41. Effects of Si addition on the glass-forming ability, glass transition and crystallization behaviors of Ti40Zr10Cu36Pd14 bulk glassy alloy10.1016/j.intermet.2007.09.012 ↗
42. Crystallization kinetics of Ca65Mg15Zn20 bulk metallic glass10.1016/j.jallcom.2012.12.158 ↗
43. Calorimetric evidence for the micro-quasicrystalline structure of'amorphous' Al/transition metal alloys10.1038/336366a0 ↗
44. Crystallization kinetics of a bulk amorphous Cu–Ti–Zr–Ni alloy investigated by differential scanning calorimetry10.1016/j.jallcom.2005.07.062 ↗
45. Anomalous temperature dependent elastic moduli of Ce-based bulk metallic glass at low temperatures10.1063/1.2813639 ↗
46. High-strength Zr-based bulk amorphous alloys containing nanocrystalline and nanoquasicrystalline particles10.1016/S1468-6996(00)00009-7 ↗
47. The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses10.1016/j.actamat.2008.07.012 ↗
48. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
49. The plasticity, crystallization and micro-hardness of Zr–Co–Al-(Nb) BMGs upon rapid quenching and conventional annealing10.1016/j.jallcom.2020.157130 ↗
50. XPS study on the surface films of a newly designed Ni-free Ti-based bulk metallic glass10.1016/j.actamat.2006.10.054 ↗
51. Evaluation of copper toxicity in isolated human peripheral blood mononuclear cells and it's attenuation by zinc: ex vivo10.1007/s11010-006-1168-2 ↗
52. Effect of copper-doped silicate 13–93 bioactive glass scaffolds on the response of MC3T3-E1 cells in vitro and on bone regeneration and angiogenesis in rat calvarial defects in vivo10.1016/j.msec.2016.05.073 ↗