Hydrothermal synthesis and gas sensing properties of lamellar Nickel Titanate
Source abstract
Abstract
Synthesizing pure nickel titanate using the hydrothermal method has posed a significant challenge. In this study, single phase lamellar structured nickel titanate were successfully synthesized via the hydrothermal method. X-ray diffraction spectroscopy (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy (RAMAN), high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET) methods were employed to investigated the effects of varying hydrothermal durations and pH values on the sample`s structure and gas-sensing performance. Results indicates that hydrothermal duration of 20 h and pH of 13 yielded sample showed single ilmenite phase, and highly sensitive ammonia (NH 3) detection capability. At room temperature, the sample exhibited a remarkable response of 17.92 k% to 500 ppm NH 3, with a response time of 13.8 s and a recovery time of 2.4 s, and a theoretical detection limit of 3.7 ppm. The exceptional sensing performance can be attributed to lamellar structure that well-exposed surface of the pore, which can absorb more oxygen molecules and provide additional active sites for redox reactions between target gas molecules and adsorbed oxygen. The outcome of this work might provide strategy for the design of novel sensing materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Zr3C2O2 MXene as promising candidate for NH3 sensor with high sensitivity and selectivity at room temperature10.1016/j.apsusc.2023.157125 ↗
2. Room temperature sensing of ammonia and formaldehyde gases through novel anisotype heterojunction of p-Co3O4/n-Gd0.1Ce0.9O2-δ as highly responsive and stable sensors10.1016/j.matchemphys.2023.128694 ↗
3. Upender, Gd3+ and Sm3+ doped CeO2 for IT-SOFC and room temperature formaldehyde gas sensing applications
4. Investigations on MWO4 (M = Cu, Zn, Cd and Sn) nanostructures for detecting toluene gas at room temperature10.1016/j.sna.2024.115094 ↗
5. Z-Scheme NiTiO3/g-C3N4 Heterojunctions with enhanced photoelectrochemical and photocatalytic performances under visible LED light irradiation10.1021/acsami.7b12386 ↗
6. Aluminum-doped zinc oxide as highly stable electron collection layer for perovskite solar cells10.1021/acsami.6b00520 ↗
7. Exploiting charge storage capabilities of NiTiO3/TiO2 for achieving the most efficient hybrid electrochromic device10.1021/acsaenm.2c00140 ↗
8. Electronic, magnetic and multiferroic properties of magnetoelectric NiTiO310.1016/j.jallcom.2014.05.189 ↗
9. Mixed potential type ppb-level acetaldehyde gas sensor based on stabilized zirconia electrolyte and a NiTiO3 sensing electrode10.1016/j.snb.2020.128329 ↗
10. Perovskite-structured NiTiO3 modified NiO gas sensor for Xylene detection10.3390/chemosensors11050264 ↗
11. Mixed-potential type NH3 sensor based on TiO2 sensing electrode with a phase transformation effect
12. Computational assisted tuning of Co-doped TiO2 nanoparticles for ammonia detection at room temperatures10.1016/j.apsusc.2022.154214 ↗
13. Highly sensitive and selective ammonia gas sensor based on FAPbCl3 lead halide perovskites10.1039/D0TC03559A ↗
14. Recent advances in ABO3 perovskites: their gas-sensing performance as resistive-type gas sensors10.1007/s43207-019-00003-1 ↗
15. Sonochemical synthesis of mesoporous NiTiO3 ilmenite nanorods for the catalytic degradation of tergitol in water10.1021/acs.iecr.5b00027 ↗
16. Structural characterization and activation energy of NiTiO3 nanopowders prepared by the co-precipitation and impregnation with calcinations10.1016/j.crci.2013.01.009 ↗
17. Synergistic effect of band gap and surface area on the improvement of NiTiO3 sunlight-driven photocatalysts via NiTiO3@S nanocomposites10.1016/j.inoche.2023.110658 ↗
18. Recent advances in hydrothermal syntheses of low dimensional nanoarchitectures10.1504/IJNT.2007.012320 ↗
19. Perovskite oxides prepared by hydrothermal and solvothermal synthesis: a review of crystallisation, chemistry, and compositions10.1002/chem.202000707 ↗
20. Oxide and chalcogenide nanoparticles from hydrothermal/solvothermal reactions10.1016/S1359-0286(02)00029-3 ↗
21. Chemiresistive NH3 sensor of cotton-stalk- based Carbon@MoS composites promoted by heterojunction10.1109/JSEN.2022.3205302 ↗
22. Synthesis and gas sensing properties of amorphous NiTiO310.2306/scienceasia1513-1874.2023.042 ↗
23. Effect of annealing temperature on the structural and solar heat shielding performance of NiTiO3 nanopowder10.1016/j.solener.2017.11.016 ↗
24. Particle size-controllable microwave-assisted solvothermal synthesis of the high-voltage cathode material LiCoPO4 using water/ethyleneglycol solvent blend10.1016/j.solidstatesciences.2017.01.009 ↗
25. Rapid response and recovery humidity sensor based on CoTiO3 thin film prepared by RF magnetron co-sputtering with post annealing process10.1016/j.ceramint.2015.08.091 ↗
26. Ni-doped CoFe2O4 hollow nanospheres as efficient Bi-functional catalysts10.1016/j.electacta.2016.04.001 ↗
27. Fabrication and characterization of NiTiO3 nanofibers by sol-gel assisted electrospinning10.1007/s10971-013-3246-8 ↗
28. X-ray photoelectron studies on some oxides and hydroxides of cobalt, nickel, and copper10.1021/ac60363a034 ↗
29. Manufacturing of NiO/NiTiO3 porous substrates and the role of zirconia impurities during sintering10.1016/S0921-5107(99)00333-5 ↗
30. Nickel titanate (NiTiO3) thin films: RF-sputtering synthesis and investigation of related features for photocatalysis10.1039/C6CE00306K ↗
31. Structural and electrochemical investigations of nanostructured NiTiO3 in acidic environment10.1007/s11706-017-0380-1 ↗
32. Understanding hydrothermal titanate nanoribbon formation10.1021/cg1004984 ↗
33. FT Raman and FTIR studies of titanias and metatitanate powders10.1039/ft9949003181 ↗
34. Effect of doping on the structural, magnetic, and ferroelectric properties of Ni1-xAxTiO3 (A = Mn, Fe, Co, Cu, Zn; x = 0, 0.05, and 0.1)10.1016/j.jallcom.2018.09.133 ↗
35. Room-temperature coexistence of electric and magnetic orders in NiTiO3 and effect of ethylene glycol10.1016/j.mseb.2017.11.009 ↗
36. Synthesis, characterization, and photovoltaic application of NiTiO3 nanostructures via two-step sol–gel method10.1007/s10854-015-3130-0 ↗
37. A highly efficient non-enzymatic glucose biosensor based on a nanostructured NiTiO3/NiO material10.1039/C5NJ01341K ↗
38. Porous ZnO/ZnCo2O4 hollow spheres: synthesis, characterization, and applications in gas sensing10.1039/C4TA04386C ↗
39. Ammonia gas sensor based on PPy/ZnSnO3 nanocomposites10.1016/j.matlet.2010.10.087 ↗
40. UV-activated ultrasensitive and fast reversible ppb NO2 sensing based on ZnO nanorod modified by constructing interfacial electric field with In2O3 nanoparticles10.1016/j.snb.2019.127498 ↗
41. MoS2-based optoelectronic gas sensor with sub-parts-per-billion limit of NO2 gas detection10.1021/acsnano.8b08778 ↗
42. Sol-gel synthesized semiconducting LaCo0.8Fe0.2O3-based powder for thick film NH3 gas sensor10.1016/j.talanta.2009.01.030 ↗
43. Hierarchical CaTiO3 microspheres for acetone sensing10.1016/j.snb.2022.131621 ↗
44. Macroporous perovskite-structured LaFeO3 microspheres and their highly sensitive and selective sensing properties to alcohols gas10.1109/TIE.2022.3167149 ↗
45. Visible light-activated room temperature NH3 sensor base on CuPc-loaded ZnO nanorods10.1016/j.snb.2020.128911 ↗
46. Nanosheets-assembled hollowed-out hierarchical Co3O4 microrods for fast response/recovery gas sensor10.1016/j.snb.2017.04.068 ↗
47. Fast triethylamine gas sensing response properties of nanosheets assembled WO3 hollow microspheres10.1016/j.apsusc.2018.09.049 ↗