Enhancing the strength and plasticity of Kovar alloy without sacrificing thermal expansion properties
Source abstract
Abstract
Enhancing the strengths of most constant-expansion alloys, including Kovar alloys, typically results in reduced plasticities and increased coefficients of thermal expansion (CTEs). In this study, we systematically investigated the effects of carbon on the microstructure, mechanical properties, and CTE of a 4J29 Kovar alloy prepared via metal injection molding (MIM). When the carbon content was in the appropriate range, the strength and plasticity could be improved without compromising the CTE. MIM samples prepared by adding 1000 ppm graphite and oxalic acid for degreasing exhibited increases of 28.2 % and 17.3 % in tensile strength and elongation, respectively, compared to those of samples with low carbon contents of 46 ppm. The average CTE remained stable at 4.92 × 10⁻⁶ ℃ –1 (25–400 ℃). The reduced number of pores at the grain boundaries was the main cause of the improvement in plasticity. The low CTE is attributed to the combined effect of the grain boundary volume fraction and porosity. This study provides significant theoretical and practical guidance for use in producing high-performance 4J29 Kovar alloys that may be used in complex components with constant-expansion properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Thermodynamic simulation of the kovar and invar behavior of ferromagnets10.1134/S0031918X07070046 ↗
2. Mixed ground state in Fe-Ni Invar alloys10.1016/j.jallcom.2021.158605 ↗
3. Wetting and spreading behavior of borosilicate glass on Kovar10.1016/j.jallcom.2008.10.028 ↗
4. Wetting and sealing of interface between 7056 Glass and Kovar alloy10.1016/j.matchemphys.2007.04.012 ↗
5. Microscopy and strength of borosilicate glass-to-Kovar alloy joints10.1016/j.msea.2007.04.016 ↗
6. Strengthening mechanism for high-entropic weld of molybdenum/Kovar alloy electron beam welded joint10.1016/j.msea.2022.143619 ↗
7. Design of metallization layers for PZT piezoelectric ceramics and joining to 4J29 Kovar alloy10.1016/j.jallcom.2024.174131 ↗
8. Sintering mechanism and microstructure evolution of a CoCrFeNiMn high entropy alloy fabricated by metal injection molding10.1016/j.jallcom.2021.158711 ↗
9. 1 - Metal powder injection molding (MIM): key trends and markets
10. Overview of metal injection moulding10.1016/S0026-0657(10)80242-5 ↗
11. Structural transformations of FCC-phases in "kovar" alloy during heating10.1007/BF00769620 ↗
12. Sintering densification and microstructural evolution of injection molding grade 17-4 PH stainless steel powder10.1007/s11661-002-0050-4 ↗
13. Effect of subgrain microstructure on the mechanical properties of Invar 36 specimens prepared by laser powder bed fusion10.1016/j.jallcom.2024.175839 ↗
14. Effect of aging on microstructures and properties of Mo-alloyed Fe–36Ni invar alloy10.1016/j.msea.2015.12.018 ↗
15. Effect of solid solution treatment on microstructure of Fe-Ni based high strength low thermal expansion alloy10.1016/S1006-706X(08)60016-3 ↗
16. Effects of Ce addition on mechanical properties and thermal expansion behavior of Fe-36Ni Invar alloy10.1016/j.matchar.2023.113584 ↗
17. Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy10.1016/j.matdes.2023.111644 ↗
18. Effect of alloying with V and Ti on microstructures and properties in Fe–Ni–Mo–C invar alloys10.1016/j.mtla.2019.100474 ↗
19. Effects of trace additions of magnesium on microstructure and properties of Fe–36Ni Invar alloy10.1002/srin.202300047 ↗
20. Strengthening of the Fe-Ni invar alloy through chromium10.3390/ma12081297 ↗
21. Effect of cold drawing on microstructure and properties of the invar alloy strengthened by carbide-forming elements10.1016/j.jmrt.2021.05.026 ↗
22. Refinement mechanism and physical properties of arc melted invar alloy with different modifiers10.1016/j.matchemphys.2019.02.006 ↗
23. Effect of Ti addition on thermal stability and phase evolution of super-invar based yttria added ODS alloys developed by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2021.163336 ↗
24. Promoting nanoprecipitates via prefabricated defects to pin dislocations and grain boundaries for trading off high-strength and low-thermal-expansion of invar alloys10.1016/j.jallcom.2024.174770 ↗
25. Effect of alloying elements on the curie point of Fe-Ni invar alloys10.1007/BF00823460 ↗
26. Effect of carbon on the coefficient of thermal expansion of as-cast Fe-30wt%Ni-12.5wt%Co-xC Invar alloys10.1007/BF03186092 ↗
27. Effect of C content on the microstructure and physical properties of Fe-36Ni invar alloy10.4028/www.scientific.net/MSF.804.293 ↗
28. Influence of carbon addition on structure and thermal properties of cast superinvar alloys10.1016/j.mspro.2014.07.255 ↗
29. Accelerating densification in Kovar alloy powders prepared by water–gas combined atomization10.1016/j.intermet.2024.108330 ↗
30. Effects of cerium addition on the microstructure, mechanical properties and strain hardening behavior of TWIP steel Fe-18Mn-0.6C10.1016/j.matchar.2021.111626 ↗
31. Effect of stacking fault probability on γ–ε martensitic transformation and shape memory effect in Fe–Mn–Si based alloys10.1016/S1359-6454(97)00266-8 ↗
32. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
33. Effects of Cr and Zr additions on microstructure and properties of Cu-Ni-Si alloys10.1016/j.msea.2016.07.021 ↗
34. Effect of stacking-fault energy on deformation twin thickness in Cu–Al alloys10.1016/j.scriptamat.2008.10.005 ↗
35. Effect of annealing on the microstructure and properties of electron beam welded 4J34 kovar alloy10.1007/s11665-018-3757-0 ↗
36. Abnormal strain evolution of austenite upon martensitic transformation in FeNiCo alloy with invar effect: an in situ study10.1016/j.scriptamat.2022.114942 ↗
37. Carbon content-tuned martensite transformation in low-alloy TRIP steels10.1038/s41598-019-44105-6 ↗
38. Oxidative degradation of carbon blacks with nitric acid: II. Formation of water-soluble polynuclear aromatic compounds10.1016/S0008-6223(01)00310-4 ↗
39. Surface composition of the steel powders pre-alloyed with manganese10.1016/j.apsusc.2010.01.055 ↗
40. Oxygen content control in metal injection molding of 316L austenitic stainless steel using water atomized powder10.1016/j.jmapro.2019.12.038 ↗
41. Enhanced mechanical properties of injection molded 17-4PH stainless steel through reduction of silica particles by graphite additions10.2320/matertrans.M2010209 ↗
42. Geometric Trajectories during Sintering
43. Enhanced mechanical performance of a biodegradable Fe–Mn alloy manufactured by metal injection molding and minor carbon addition
44. Effects of carbon content on the properties of novel nitrogen-free austenitic stainless steel with high hardness prepared via metal injection molding10.3390/met13020403 ↗
45. EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy10.1016/j.jallcom.2017.07.027 ↗
46. Cooperative effect of strength and ductility processed by thermomechanical treatment for Cu–Al–Ni alloy10.1016/j.msea.2022.143485 ↗
47. An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: microstructure, mechanical properties and thermal stability10.1016/j.msea.2023.144965 ↗
48. Tensile property enhancement by oxygen solutes in selectively laser melted titanium materials fabricated from pre-mixed pure Ti and TiO2 powder10.1016/j.msea.2020.139983 ↗
49. Some strengthening methods for austenitic stainless steels10.1002/srin.200806146 ↗
50. The effect of cold work on structure and properties of AISI 304 stainless steel10.1016/j.jmatprotec.2007.09.080 ↗
51. Microstructure and tensile properties of the Fe-32%Ni-4%Co alloy during cryorolling and subsequent annealing10.1007/s11665-018-3746-3 ↗
52. Effects of hatch spacing on pore segregation and mechanical properties during blue laser directed energy deposition of AlSi10Mg
53. Multiscale thermoelastic analysis of the thermal expansion coefficient and of microscopic thermal stresses of mature concrete
54. Coefficient of thermal expansion of particulate composites with ceramic inclusions10.1016/j.ceramint.2016.08.082 ↗
55. Graphite thermal expansion relationship for different temperature ranges10.1016/j.carbon.2005.06.009 ↗
56. Effects of the microstructure and precipitation hardening on the thermal expansion behavior of ZK60 magnesium alloy10.1016/j.jallcom.2021.163422 ↗
57. A study of thermal expansion coefficients and microstructure during selective laser melting of Invar 36 and stainless steel 316L
58. On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion10.1016/j.matdes.2018.10.025 ↗
59. Thermal expansion behaviour of Invar 36 alloy parts fabricated by wire-arc additive manufacturing10.1016/j.jmrt.2022.06.114 ↗
60. Invar alloys10.1016/S1359-0286(96)80023-4 ↗
61. Fe-Ni Invar alloys: A review10.1016/j.matpr.2020.12.527 ↗
62. Origin of the Invar effect in iron–nickel alloys10.1038/21848 ↗
63. Cold spray additive manufacturing of Invar 36 alloy: microstructure, thermal expansion and mechanical properties10.1016/j.jmst.2020.07.038 ↗
64. Investigation on microstructure and properties of laser solid formed low expansion Invar 36 alloy10.1016/j.jmrt.2020.03.108 ↗
65. On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting
66. Fe–Ni Invar alloy reinforced by WC nanoparticles with high strength and low thermal expansion10.1007/s42452-019-0182-4 ↗
67. Effect of warm rolling on microstructures and properties of the high strength invar alloy10.1016/j.jmrt.2022.06.078 ↗
68. Effect of processing parameters on the microstructure, mechanical properties and thermal expansion behavior of Invar 36 alloy manufactured by laser powder bed fusion10.1016/j.msea.2024.146329 ↗