journal article·2024-10

Oxygen concentration – A governing parameter for microstructural tailoring of duplex AlCrSiON coatings for superior mechanical, tribological, and anti-corrosion performance

Farooq Ahmad, R. Vignesh Babu, Xizhou Kai, Muhammad Raies Abdullah, Mahadi Hasan, Soban Muddassir Dar, Abdul Wasy Zia, Yutao Zhao, Lin Zhang

Publisher page

Abstract

This study investigates the impact of increasing oxygen levels on structure, and mechanical properties and tribological performance of duplex AlCrSiON coatings. AISI H13 steel and tungsten carbide substrates are coated using arc ion plating with increasing oxygen flow rate up to 200 sccm with varying oxygen concentration. High-resolution transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and three-dimensional profilometer are used to study morphological and structural evolution. Correspondingly, the coatings are assessed for hardness, adhesion strength, friction coefficient, and resistance against corrosion and wear. A 50–100 sccm oxygen flow rate is considered as an optimal range to receive lower surface roughness. Generally, the addition of oxygen has compromised hardness and friction coefficient but improve adhesion strength, wear and corrosion resistance with increasing oxygen concentration. The immersion tests have identified pitting corrosion as a dominating failure mechanism for AlCrSiON coatings when exposed to molten A380 aluminium alloy. This corrosion resistance stems from their dense microstructure, excellent thermal stability, and the presence of fcc-(Al, Cr) 2O 3 phase structure. This study demonstrates that controlled oxygen concentration is a crucial parameter for tuning the microstructure of AlCrSiON coatings to achieve superior mechanical, tribological, and anti-corrosion performance, particularly for high-pressure die-casting applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. High-pressure die-casting: Contradictions and challenges10.1007/s11837-015-1333-8 ↗
2. Current failure mechanisms and treatment methods of hot forging tools (dies) - a review10.1016/j.engfailanal.2021.105678 ↗
3. Thermal fatigue life prediction method for die casting mold steel based on the cooling cycle10.1016/j.jmatprotec.2023.118131 ↗
4. Industrial evaluation of duplex PVD hard coatings for HPDC10.1007/s40430-018-1190-9 ↗
5. Influence of Al/(Al+Cr) ratio and doping effects on wear and molten aluminum attack resistance in AlCrN-based PVD coatings for lube-free aluminum die casting10.1016/j.jmrt.2022.07.103 ↗
6. High-temperature tribological properties of CrAlN, CrAlSiN and AlCrSiN coatings10.1016/j.surfcoat.2011.08.037 ↗
7. A superhard CrAlSiN superlattice coating deposited by a multi-arc ion plating: II. Thermal stability and oxidation resistance10.1016/j.surfcoat.2012.05.143 ↗
8. A superhard CrAlSiN superlattice coating deposited by multi-arc ion plating: I. Microstructure and mechanical properties10.1016/j.surfcoat.2012.05.144 ↗
9. Gradient architecture of Si containing layer and improved cutting performance of AlCrSiN coated tools10.1016/j.wear.2019.02.021 ↗
10. Structural evolution and electrochemical behaviors of multilayer Al-Cr-Si-N coatings10.1016/j.surfcoat.2016.04.017 ↗
11. Interfacial structure, mechanical properties and thermal stability of CrAlSiN/CrAlN multilayer coatings10.1016/j.matchar.2017.01.010 ↗
12. Improved thermal stability of AlCrSiN coatings base on the template effect of TiAlN layer10.1080/02670844.2021.2023389 ↗
13. Effect of bias voltages and interlayer design on microstructure, mechanical properties, and adhesion performance of AlCrSiN coatings deposited using HiPIMS10.1016/j.surfcoat.2024.130618 ↗
14. Adhesive-deformation relationships and mechanical properties of nc-AlCrN/a-SiNx hard coatings deposited at different bias voltages10.1016/j.tsf.2018.02.006 ↗
15. Influence of Ni-addition on mechanical, tribological properties and oxidation resistance of AlCrSiN coatings10.1016/j.ceramint.2018.11.039 ↗
16. Characterization of magnetron sputtered sub-stoichiometric CrAlSiNx and CrAlSiOyNx coatings10.1016/j.surfcoat.2017.08.038 ↗
17. Influence of oxygen content on structure and properties of multi-element AlCrSiON oxynitride thin films10.1016/j.surfcoat.2010.02.029 ↗
18. Effect of incorporating oxygen on microstructure and mechanical properties of AlCrSiON coatings deposited by arc ion plating10.1016/j.surfcoat.2016.12.057 ↗
19. Microstructure of Al95.5Cr2.5Si2(N1−xOx) thin films covering from nitrides to oxides10.1016/j.surfcoat.2011.05.031 ↗
20. Effects of Si and y in structural development of (Al,Cr,Si/Y)O xN1 - X thin films deposited by magnetron sputtering10.1016/j.tsf.2013.06.062 ↗
21. Incorporation of oxygen at column boundaries in (Cr,Al)ON hard coatings10.1016/j.tsf.2019.06.047 ↗
22. Structure and electronic properties of AlCrOxN1 - X thin films deposited by reactive magnetron sputtering10.1016/j.tsf.2014.07.066 ↗
23. Thermal stability of arc evaporated Al-Cr-O-N coatings10.1016/j.surfcoat.2018.09.036 ↗
24. Thermal stability of arc evaporated Al-Cr-O and Al-Cr-O/Al-Cr-N multilayer coatings10.1016/j.surfcoat.2018.08.002 ↗
25. Structural evolution and high-temperature tribological properties of AlCrON coatings deposited by multi-arc ion plating10.1016/j.ceramint.2020.06.208 ↗
26. Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications10.1016/j.solmat.2016.04.007 ↗
27. Investigation on plastic deformation of arc-evaporated AlCrSiN and AlCrSiON nanocomposite films by indentation10.1016/j.surfcoat.2022.128570 ↗
28. Microstructure and properties of the AlCrSi(O)N tool coatings by arc ion plating10.3390/coatings10090841 ↗
29. Effect of background gas environment on oxygen incorporation in TiN films deposited using UHV reactive magnetron sputtering10.1016/j.vacuum.2008.04.014 ↗
30. Industrial applications of superhard nanocomposite coatings10.1016/j.surfcoat.2008.05.038 ↗
31. Superhard nanocomposites: Origin of hardness enhancement, properties and applications10.1016/j.surfcoat.2009.09.033 ↗
32. Study on the thermal erosion, wear and corrosion behaviors of TiAlN/oxynitriding duplex-treated AISI H13 alloy steel10.1016/j.surfcoat.2012.07.080 ↗
33. Adhesive-deformation relationships and mechanical properties of nc-AlCrN/a-SiNx hard coatings deposited at different bias voltages10.1016/j.tsf.2018.02.006 ↗
34. Comparison of Mechanical and Tribological Properties of Nitride and Oxynitride Coatings Based on Chrome and Zirconium Obtained by Cathodic Arc Evaporation10.3103/S1068366619020156 ↗
35. Structure of CrON coatings formed in vacuum arc plasma fluxes10.1016/j.surfcoat.2016.10.061 ↗
36. Oxynitride c-Al0.7Cr0.3OxN(1-x) arc-PVD hard-coatings, processing, mechanical properties & stability at high temperatures10.1016/j.surfcoat.2022.128974 ↗
37. Tribological properties, oxidation resistance and turning performance of AlTiN/AlCrSiN multilayer coatings by arc ion plating10.1016/j.surfcoat.2018.09.027 ↗
38. The influence of synthetic air flow on the properties of arc evaporated Al-Cr-O-N coatings10.1016/j.tsf.2019.04.027 ↗
39. Correlation between anionic substitution and structural properties in AlCr(OxN1−x) coatings deposited by lateral rotating cathode arc PVD10.1016/j.tsf.2011.08.075 ↗
40. Correlation between target surface and layer nucleation in the synthesis of Al-Cr-O coatings deposited by reactive cathodic arc evaporation10.1016/j.surfcoat.2010.08.152 ↗
41. Effective solution for the tribological problems of Ti-6Al-4V: Combination of laser surface texturing and solid lubricant film10.1016/j.surfcoat.2012.06.014 ↗
42. The role of load on wear mechanisms in high temperature sliding contacts10.1016/j.wear.2016.06.025 ↗
43. The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating10.1016/j.triboint.2017.05.035 ↗
44. Effects of thermal erosion and wear resistance on AISI H13 tool steel by various surface treatments10.2320/matertrans.M2011360 ↗