journal article·2024-10

Effect of HPHT technology and Se doping on thermoelectric properties of In filled Fe doped CoSb3 materials

Z.L. Guo, Z.L. Liu, X. Wang, L. Deng

Publisher page

Abstract

Skutterudite (CoSb 3 ) is a kind of promising environment-friendly medium-temperature thermoelectric material. Indium-filled CoSb 3 has been widely studied, but its bipolar effect, which is commonly generated between 600 and 700 K, seriously hinders the increase of Seebeck coefficient and zT value. The zT value not only directly reflects the overall thermoelectric performance of the material, but also reflects the thermoelectric conversion efficiency of the device. In this work, In filled and Fe, Se double doped CoSb 3 materials were successfully prepared by high-temperature and high-pressure synthesis method (HPHT), with a significant shorten synthesis time of 30 mins for each sample. This research has shown that after Se doping via HPHT synthesis method, the bipolar effect of In-filled CoSb 3 was significantly suppressed, thus the temperature limitations of electrical transport performance has been overcome. Through the further microstructure analysis, it was found that the crystal structure of sample In 0.5Fe 0.01Co 3.99Sb 11.91Se 0.09 has the characteristics of multiple grain sizes and complex defect types. And these two microscopic morphological characteristics resulted in the sample obtaining a minimum lattice thermal conductivity of 0.94 Wm −1K −1 at a test temperature of 773.15 K. Through synergistic optimization of synthesis methods and element substitution, the maximum zT value of 1.21 of the sample In 0.5Fe 0.01Co 3.99Sb 11.91Se 0.09 has been found at 773.15 K.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
2. High-temperature thermal energy via elastic thermoelectric aerogels10.1007/s40820-024-01370-z ↗
3. Grid-plainification enables medium-temperature PbSe thermoelectrics to cool better than Bi2Te310.1126/science.adk9589 ↗
4. Lattice dynamics and thermoelectric properties of diamondoid materials
5. Enhanced electrical properties of Bi2-xSbxTe3 nanoflake thin films through interface engineering10.1002/eem2.12755 ↗
6. Fast fabrication of high-performance CoSb3-based thermoelectric skutterudites via one-step Yb-promoted peritectic solidification
7. Pseudo-nanostructure and trapped-hole release induce high thermoelectric performance in PbTe10.1126/science.adj8175 ↗
8. Ce-filled Ni1.5Co2.5Sb12 skutterudite thin films with record-high figure of merit and device performance10.1002/aenm.202301525 ↗
9. Converting n-type Co4Ge6Te6 skutterudite into p-type and enhancing its thermoelectric properties through Fe substitution10.1016/j.jallcom.2022.165314 ↗
10. Understanding thermal and electronic transport in high-performance thermoelectric skutterudites10.1016/j.intermet.2022.107567 ↗
11. Atomic structure and lattice dynamics of CoSb3 skutterudite-based thermoelectrics10.1021/acs.chemmater.1c03747 ↗
12. Enhancing thermoelectric performance of Yb0.3Co4Sb12 by synergistically optimized carrier concentration and ionized impurity scattering10.1021/acsami.1c12862 ↗
13. Transport properties of CuxCo4Sb11. 7Te0.3 prepared by solid-state reaction10.1007/s10832-022-00286-7 ↗
14. Thermal expansion and rattling behavior of Gd-filled Co4Sb12 skutterudite determined by high-resolution synchrotron x-ray diffraction10.3390/ma16010370 ↗
15. The inclusion of ceramic carbides dispersion in and Yb Filled CoSb3 and their effect on the thermoelectric performance10.1016/j.jallcom.2021.162400 ↗
16. Enhanced thermoelectric performance of skutterudite Co1-yNiySn1.5Te1.5-x with switchable conduction behavior
17. Thermoelectric properties of sulfur-filled and iron-substituted Co4Sb1210.1021/acsaem.2c02808 ↗
18. High-performance n-Type CoSb3-based thermoelectric material with vortex and strip-shaped grain structures10.1016/j.jeurceramsoc.2022.12.037 ↗
19. Enhanced thermoelectric and mechanical performance in N-Type Yb-filled skutterudites through aluminum alloying10.1021/acsami.0c01798 ↗
20. Rapid preparation of high-performance S0.4Co4Sb11.2Te0.8 skutterudites with a highly porous structure10.1016/j.jeurceramsoc.2021.03.018 ↗
21. Effect of the annealing treatment on structural and transport properties of thermoelectric Smy(FexNi1-x)4Sb12 thin films10.1088/1361-6528/aca980 ↗
22. In-situ observation of temperature dependent microstructural changes in HPT-produced p-type skutterudites10.1016/j.jallcom.2024.173431 ↗
23. S0.05Co4Sb11.6Te0.4 skutterudite introduced into graphene at high pressure and high temperature and its thermoelectric performance enhancement10.1016/j.ceramint.2022.02.043 ↗
24. Investigation of Mn single and Co-doping in thermoelectric CoSb3-Skutterudite: a way toward a beneficial composite effect10.1021/acsaem.3c01725 ↗
25. Filled Sb-Based Skutterudites from 1996–202210.3390/cryst12121843 ↗
26. Induced nonstoichiometric effects of Sb in p-type skutterudite thermoelectrics
27. New synthesis route of highly porous InxCo4Sb12 with strongly reduced thermal conductivity10.1007/s10853-020-04952-5 ↗
28. Microstructure and high-temperature thermoelectric performance of InxCo4Sb12 fabricated via microwave synthesis combined with spark plasma sintering10.1007/s11664-023-10296-y ↗
29. Reaction mechanism and thermoelectric properties of In0.22Co4Sb12 prepared by magnesiothermy
30. Thermoelectric properties of In1Co4Sb12+δ: role of in situ formed InSb precipitates, Sb overstoichiometry, and processing conditions10.1039/D2TA07625J ↗
31. Thermoelectric transport properties of double-filling InxLa0.25Co4Sb12 skutterudite materials10.1007/s11664-022-10083-1 ↗
32. Phase diagram of In–Co–Sb system and thermoelectric properties of In-containing skutterudites10.1039/C3EE43240H ↗
33. High homogeneity and ultralow lattice thermal conductivity in Se/Te-doped skutterudites obtained by self-propagating high-temperature synthesis and pulse plasma sintering10.1016/j.jallcom.2022.164796 ↗
34. Rapid fabrication of Se-modified skutterudites obtained via self-propagating high-temperature synthesis and pulse plasma sintering route10.1016/j.ceramint.2022.11.124 ↗
35. Enhancement of thermoelectric performance in robust ZnO-based composite ceramics driven by A stepwise optimization strategy
36. Preparation of high-performance Mn-doped SnTe materials at high pressure and high temperature10.1021/acs.inorgchem.3c03991 ↗
37. Optimization of thermoelectric properties in La -Nb-doped bulk SrTiO3 synthesized by HPHT method10.1016/j.ceramint.2024.01.435 ↗
38. Influence of Ni doping on the thermoelectric properties of Bi2S3 via high pressure and high temperature10.1016/j.jallcom.2023.171575 ↗
39. Superior thermoelectric performance of black phosphorus in elemental tellurium10.1002/aenm.202203014 ↗
40. Low thermal conductivity induced thermoelectric improvement in pristine snte via high-pressure engineering10.1021/acsaem.4c00249 ↗
41. High-Pressure and High-Temperature synthesis and pressure-induced simultaneous optimization of the electrical and thermal transport properties of nonstoichiometric TiO1.8010.1021/acs.inorgchem.7b01677 ↗
42. Effects of pressure on the microstructure and simultaneous optimization of the electrical and thermal transport properties of Yb0.5Ba7.5Ga16Ge3010.1021/acs.inorgchem.8b00061 ↗
43. Superior carrier mobility enabled by the charge channel leads to enhanced thermoelectric performance in BiCuSeO composites
44. Raman spectroscopy investigation of lanthanide-filled and unfilled skutterudites10.1103/PhysRevB.59.6189 ↗
45. Structure optimization and multi-frequency phonon scattering boosting thermoelectrics in self-doped CoSb3-based skutterudites10.1021/acsami.2c20292 ↗
46. Synthesis Optimization and thermoelectric properties of S-Filled and Te-Se double-substituted skutterudite under high pressure10.1021/acs.inorgchem.2c00376 ↗
47. A review of CoSb3-based skutterudite thermoelectric materials10.1007/s40145-020-0407-4 ↗
48. Impacts of both high pressure and Te–Se double-substituted skutterudite on the thermoelectric properties prepared by HTHP10.1016/j.jallcom.2014.07.173 ↗
49. Characterization of lorenz number with seebeck coefficientmeasurement10.1063/1.4908244 ↗
50. High-performance n-type YbxCo4Sb12: from partially filled skutterudites towards composite thermoelectrics10.1038/am.2016.77 ↗
51. Optimization of thermoelectric properties of CoSb3 materials by increasing the complexity of chemical structure10.1016/j.jallcom.2020.156063 ↗
52. Thermoelectric property enhancement in Yb-doped n-type skutterudites YbxCo4Sb1210.1016/j.actamat.2014.05.019 ↗
53. Thermoelectric transport effects beyond single parabolic band and acoustic phonon scattering10.1039/D1MA00780G ↗
54. Controllable 2H3R phase transition and conduction behavior change in MoSe2 Nb substitution by high pressure synthesis for promising thermoelectric conversion10.1063/5.0141999 ↗