journal article·2024-09

Enhancing mechanical properties and microstructure evolution of hybrid AZ61-5SiC-0.5CNTs composite during equal channel angular pressing

Mingyang Zhou, Yanli Zhao, Dan Sun, Ziyao Long, Laiyao Gen, Lingling Fan, Shixin Gao, Yong Xin, Gaofeng Quan, Manoj Gupta

Publisher page

Abstract

Equal channel angular pressing (ECAP) is one of widely used severe plastic deformation methods for improving performance of metallic materials. In this work, the effects of the ECAP on the microstructural evolution and mechanical properties of the AZ61–5SiC-0.5CNTs composite were studied systematically. The results revealed that ECAP can effectively reduce the porosity of the AZ61–5SiC-0.5CNTs composite, refine grains, weaken basal texture, and promote the further dispersion of CNTs, which can optimize the microstructure of the composite. However, the large shear effect of ECAP also leads to the destruction of the structural integrity of the CNTs and thus reduces the strengthening effect. Due to the combined effects of grain refinement, porosity changes, texture evolution, and structural damage of CNTs, the composites reached the highest strength after 2 ECAP passes at 250 ℃. The yield and tensile strengths were increased to 383 MPa (+11.0 %) and 445 MPa (+8.0 %), respectively, while the elongation was marginally reduced, but remained around 6 %.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Metal matrix composites - from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
2. Progress in research on hybrid metal matrix composites10.1016/j.jallcom.2020.155274 ↗
3. Strengthening of Mg-Al-Zn-Mn alloy using SiC/Al nanocomposite extrusion10.1016/j.jallcom.2022.166243 ↗
4. Investigating the Hall-Petch constants for As-cast and aged AZ61/CNTs metal matrix composites and their role on superposition law exponent10.3390/jcs5040103 ↗
5. Qualitative and quantitative investigation of As-cast and aged CNT/AZ31 metal matrix composites10.1007/s11837-020-04114-7 ↗
6. Hot deformation behavior and processing map of AZ61/SiC composites
7. Achieving ultra-high strength and good ductility in AZ61 alloy composites containing hybrid micron SiC and carbon nanotubes reinforcements
8. Significantly improved strength and ductility in bimodal-size grained microstructural magnesium matrix composites reinforced by bimodal sized SiCp over traditional magnesium matrix composites10.1016/j.compscitech.2015.08.009 ↗
9. Verlinden · 2007
10. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
11. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
12. Strength and ductility enhancement of AZ61/Al2O3/SiC hybrid composite by ECAP processing
13. Strengthening of Mg-Al-Zn-Mn alloy using SiC/Al nanocomposite extrusion10.1016/j.jallcom.2022.166243 ↗
14. Effect of ECAP on the microstructure and tensile property of SiCp/AZ91 magnesium matrix composite10.4028/www.scientific.net/KEM.353-358.1342 ↗
15. Enhancement of strength and ductility of SiCp/AZ91 composites by RD-ECAP processing
16. Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)10.1016/j.matchar.2016.10.003 ↗
17. Microstructure evolution and mechanical behavior of CNTs/AZ31 magnesium alloy composites processed by equal channel angular pressing10.4028/www.scientific.net/AMR.97-101.1628 ↗
18. An investigation on the capability of equal channel angular pressing for consolidation of aluminum and aluminum composite powder10.1016/j.matdes.2011.02.015 ↗
19. Refining SiCp in reinforced Al-SiC composites using equal-channel angular pressing10.1016/j.matdes.2014.07.045 ↗
20. Evolution of nanoscale porosity during equal-channel angular pressing of titanium10.1016/j.actamat.2009.02.042 ↗
21. Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite10.1016/j.carbon.2016.03.038 ↗
22. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
23. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
24. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
25. Texture evolution in equal channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
26. Wei Erdong · 2010
27. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing10.1016/S1359-6454(03)00161-7 ↗
28. Simultaneously improving the strength and ductility of extruded bimodal size SiCp/AZ61 composites: Synergistic effect of micron/nano SiCp and submicron Mg17Al12 precipitates10.1016/j.msea.2018.11.023 ↗
29. Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite10.1016/j.compositesa.2012.03.007 ↗
30. Influence of nano-alumina and sub-micron copper on mechanical properties of magnesium alloy AZ3110.1016/j.compositesb.2013.06.041 ↗
31. Effect of hybridizing micron-sized Ti with nano-sized SiC on the microstructural evolution and mechanical response of Mg-5.6Ti composite10.1016/j.jallcom.2013.04.095 ↗
32. Fabrication and properties of magnesium matrix composite reinforced by urchin-like carbon nanotube-alumina in situ composite structure10.1016/j.jallcom.2018.02.273 ↗
33. As-cast magnesium AM60-based hybrid nanocomposite containing alumina fibres and nanoparticles: Microstructure and tensile behaviour10.1016/j.msea.2017.10.070 ↗
34. Effect of alumina and silicon carbide hybrid reinforcements on tensile, compressive and microhardness behaviour of Mg-3Al-1Zn alloy10.1016/j.matchar.2015.06.033 ↗
35. Fabrication of bimodal size SiCp reinforced AZ31B magnesium matrix composites10.1016/j.msea.2014.02.035 ↗
36. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing[J]10.1016/S1359-6454(03)00161-7 ↗