journal article·2024-09

Permeability and strength of gradient printed permeable steel manufactured by selective laser melting

Liangliang Zhang, Minjie Wang, Hongxia Li, Jianye Liu

Publisher page

Abstract

Based on the forming principle of laser rapid melting and layered manufacturing, the selective laser melting (SLM) process is suitable for the preparation of permeable metal materials with a certain porosity. One of the important applications of this special structure is the development of permeable steel. In this study, the permeable steel with micron-sized controllable pores was prepared by gradient printing using SLM process. The formation and connectivity mechanism of pore structure were analyzed by adjusting the interlayer arrangement of scanning melt channels, and the influence of process parameters on the pore characteristics, permeability and mechanical properties was systematically investigated. The results revealed that the porosity and pore size of permeable steel were effectively improved by controlling the hatch distance and scanning strategy, with the results ranging from 7.81 % to 17.32 % and 57 μm to 121 μm, respectively. Based on the gas permeation test, it was verified that the permeability of permeable steel showed a clear upward trend with increasing porosity, and the results ranged from 2.17 × 10 −12 m 2 to 4.26 × 10 −12 m 2 , indicating that the pore structure provides a strong basis for gas flow. Moreover, the mechanical properties of permeable steel decreased significantly with the increase of porosity and pore size, and the compressive strength and tensile strength ranged from 1061 MPa to 528 MPa and 1018 MPa to 609 MPa, respectively. The mechanical behavior and deformation mechanism were closely related to the gradient evolution of the pore structure. Overall, the gradient printed permeable steel using SLM process has good permeability and mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials10.1016/j.matdes.2023.111661 ↗
2. Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review10.1007/s10853-023-08953-y ↗
3. Additive manufacturing of steels: a review of achievements and challenges10.1007/s10853-020-05109-0 ↗
4. Additively manufactured continuous cell-size gradient porous scaffolds: pore characteristics, mechanical properties and biological responses in vitro10.3390/ma13112589 ↗
5. Additive manufacture of low melting point metal porous materials: capabilities, potential applications and challenges10.1016/j.mattod.2021.03.019 ↗
6. A simple and convenient approach to fabricate gas permeable mould steel by selective laser melting10.1080/10667857.2021.1985749 ↗
7. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metal biomaterials10.1016/j.actbio.2018.12.013 ↗
8. Optimization of direct metal printing process parameters for plastic injection mold with both gas permeability and mechanical properties using design of experiments approach10.1007/s00170-020-05724-w ↗
9. Microstructure effect on the permeability of the tape-cast open-porous materials
10. A novel process for manufacturing porous 316L stainless steel with uniform pore distribution10.1016/j.matdes.2017.02.069 ↗
11. Longitudinal graded porous titanium fabricated by spark plasma sintering: design of layers, direction of crack path10.1016/j.jmapro.2022.07.036 ↗
12. Influence of the Ar pressure on the structure of the NiTi foams producedby self-propagating high-temperature synthesis10.1016/j.matlet.2021.130047 ↗
13. Permeability and strength of a porous metal structure fabricated by additive manufacturing10.1016/j.jmatprotec.2014.11.043 ↗
14. Correlations of laser scanning parameters and porous structure properties of permeable materials made by laser-beam powder-bed fusion
15. Air permeability of maraging steel cellular parts made by selective laser melting10.3390/ma14113118 ↗
16. 3D printed breathable mould steel: small micrometer-sized, interconnected pores by creatively introducing foaming agent to additive manufacturing10.1016/j.matdes.2019.107693 ↗
17. Mechanical behavior of Ti6Al4V produced by laser powder bed fusion with engineered open porosity for dental applications10.1016/j.jmbbm.2021.104974 ↗
18. Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure10.1016/j.matdes.2021.109911 ↗
19. Designing of gradient scaffolds and their applications in tissue regeneration10.1016/j.biomaterials.2023.122078 ↗
20. Laser powder bed fusion of porous graded structures: a comparison between computational and experimental analysis
21. Correlation between porosity and permeability of stainless steel filters with gradient porosity produced by SLS/SLM10.1108/RPJ-09-2018-0224 ↗
22. Progresses on the additive manufacturing of functionally graded metallic materials10.1016/j.jallcom.2023.170687 ↗
23. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel10.1016/j.matdes.2013.03.056 ↗
24. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
25. EOS GmbH – Electro Optical Systems, Material Data Sheet: EOS Stainless Steel CX, München, 2017. 〈〈www.eos.info〉〉.
26. ASTM E8/E8M, Standard test methods for tension testing of metallic materials, ASTM Int., 2016, 〈https://doi.org/10.1520/e0008_e0008m-16a〉.10.1520/E0008_E0008M-16A ↗
27. Pore structure and gas permeability of high Nb-containing TiAl porous alloys by elemental powder metallurgy for microfiltration application10.1016/j.intermet.2012.07.022 ↗
28. Image processing with ImageJ, Biophoton
29. Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting10.1007/s11837-015-1300-4 ↗
30. The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting10.1016/j.jmapro.2019.03.018 ↗
31. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6A1–4 V alloy10.1016/j.matdes.2016.08.036 ↗
32. Investigation of the relationship between morphology and permeability for open-cell foams using virtual materials testing10.1016/j.matdes.2018.03.022 ↗
33. On the role of melt flow into the surface structure and porosity development during selective laser melting10.1016/j.actamat.2015.06.004 ↗
34. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting
35. Selective laser melting (SLM) of CX stainless steel: theoretical calculation, process optimization and strengthening mechanism10.1016/j.jmst.2020.09.031 ↗
36. Gyroid-based functionally graded porous titanium scaffolds for dental application: design, simulation and characterizations10.1016/j.matdes.2022.111300 ↗
37. Compressive properties of Ti6Al4V functionally graded lattice structures via topology optimization design and selective laser melting fabrication10.1016/j.msea.2022.144265 ↗
38. Microstructure and mechanical properties of stainless steel CX manufactured by direct metal laser sintering10.1016/j.msea.2017.10.045 ↗
39. Effect of the direction of the gradient on the mechanical properties and energy absorption of additive manufactured Ti-6Al-4V functionally graded lattice structures10.1016/j.jallcom.2023.171874 ↗
40. Structural design and mechanical properties of porous structured diamond abrasive tool by selective laser melting10.1016/j.ceramint.2022.10.136 ↗
41. Air permeability and tensile properties of novel micron-scale gradient porous plates fabricated by rolling and vacuum sintering
42. A hybrid additively manufactured martensitic maraging stainless steel with superior strength and corrosion resistance for plastic injection molding dies
43. Effect of selective laser melting process parameters on the microstructure and properties of a precipitation hardening stainless steel10.1016/j.matdes.2021.110265 ↗
44. The select of internal architecture for porous Ti alloy scaffold: a compromise between mechanical properties and permeability10.1016/j.matdes.2020.108754 ↗
45. Additive manufacturing of an Fe–Cr–Ni–Al maraging stainless steel: microstructure evolution, heat treatment, and strengthening mechanisms10.1016/j.msea.2020.139470 ↗
46. Effect of heat treatment on microstructure and mechanical properties of Fe-Cr-Ni-Co-Mo maraging stainless steel produced by selective laser melting10.1016/j.msea.2021.141149 ↗
47. Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting10.1007/s10853-020-04566-x ↗
48. Influence of pore defects on the mechanical property and corrosion behavior of SLM 18Ni300 maraging steel10.1016/j.matchar.2021.111514 ↗