Constructing stable electrode–electrolyte interfaces by sulfone-based additive to improve the high-voltage performance of LiCoO2
Source abstract
Abstract
LiCoO 2 battery can provide high reversible capacity at a high voltage of 4.6 V, however, maintaining its stability at high voltages remains a major challenge. To address this issue, ethyl methyl sulfone (EMS) is employed as an electrolyte additive to construct stable interfaces between the electrode and electrolyte under high-voltage condition. The characterization results indicate that the addition of EMS can inhibit the decomposition of the standard electrolyte (STD) and the dissolution of Co 2+ from cathode, as well as the formation of lithium dendrites on the Li anode, thereby enhancing the stability of both cathode/electrolyte and anode/electrolyte interfaces. Consequently, the cycling performance of LiCoO 2 battery using STD+3 %EMS is augmented by 16.9 % at 1 C under a cut-off voltage of 4.6 V over 100 cycles, delivering a specific capacity of 137 mA h g −1. This research provides novel insights into the design of electrolyte additives for high-voltage LiCoO 2 batteries and contributes to the further development of high-voltage lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Electro-oxidation reconstitution of aluminium copper MOF-derived metal oxyhydroxides for a robust OER process10.1039/D2RA07661F ↗
2. Lead-free relaxor ferroelectric ceramics with ultrahigh energy storage densities via polymorphic polar nanoregions design10.1002/smll.202206958 ↗
3. Critical review on cathode–electrolyte interphase toward high-voltage cathodes for Li-Ion batteries10.1007/s40820-022-00917-2 ↗
4. Revealing the accelerated capacity decay of a high-voltage LiCoO2 upon harsh charging procedure10.1002/adfm.202312837 ↗
5. Critical problems and modification strategies of realizing high-voltage LiCoO2 cathode from electrolyte engineering10.1002/aenm.202303498 ↗
6. Constructing a stabilized cathode electrolyte interphase for high-voltage LiCoO2 batteries via the phenylmaleic anhydride additive10.1021/acsaem.2c03934 ↗
7. Operating highly stable LiCoO2 cathodes up to 4.6 V by using an effective integration of surface engineering and electrolyte solutions selection10.1002/adfm.202204972 ↗
8. Interfacial design for a 4.6 V high-voltage single-crystalline LiCoO2 cathode10.1002/adma.202108353 ↗
9. Mitigating lattice distortion of high-voltage LiCoO2 via core-shell structure induced by cationic heterogeneous co-doping for lithium-ion batteries10.1007/s40820-023-01269-1 ↗
10. Co/Li-dual-site doping towards LiCoO2 as a high-voltage, fast-charging, and long-cycling cathode material10.1039/D1TA10612K ↗
11. Conformal coating of a high-voltage spinel to stabilize LiCoO2 at 4.6 V10.1021/acsami.2c21006 ↗
12. In situ constructing a stable interface film on high-voltage LiCoO2 cathode via a novel electrolyte additive10.1016/j.nanoen.2021.106535 ↗
13. Improving interfacial stability of high voltage LiCoO2-based cells with 4-methylmorpholine-2,6-dione additive10.1016/j.jpowsour.2022.231049 ↗
14. Boosting high voltage cycling of LiCoO2 cathode via triisopropanolamine cyclic borate electrolyte additive10.1016/j.jpowsour.2022.231372 ↗
15. Embedded with soluble polysulfides for high-voltage Li metal batteries10.1002/eem2.12393 ↗
16. Sulfur-rich additive-induced interphases enable highly stable 4.6 V LiNi0.5Co0.2Mn0.3O2||graphite pouch cells
17. The roles of sulfur-containing additives and their working mechanism on the temperature-dependent performances of Li-ion batteries10.1149/2.0331811jes ↗
18. Use the Functional electrolyte containing 2-propynemethanesulfonate or 2-propynebenzenesulfonate additives to improve the long-cycle performance of LiNi0.8Co0.1Mn0.1O2/graphite batteries10.1149/1945-7111/acc27c ↗
19. Sulfone-based high-voltage electrolytes for high energy density rechargeable lithium batteries: progress and perspective10.1016/j.cclet.2020.10.009 ↗
20. Stabilization of high-voltage lithium metal batteries using a sulfone-based electrolyte with bi-electrode affinity and LiSO2F-rich interphases10.1016/j.ensm.2021.10.045 ↗
21. A new fluorine-containing sulfone-based electrolyte for advanced performance lithium metal batteries10.1016/j.est.2023.107137 ↗
22. Bifunctional additive phenyl vinyl sulfone for boosting cyclability of lithium metal batteries10.1016/j.gce.2022.03.002 ↗
23. Modifying the cathode–electrolyte interphase by sulfone-based additive to enhance the electrochemical performance of LiNi0.5Mn1.5O410.1021/acsaem.1c03150 ↗
24. Dimethyl sulfide electrolyte additive enabled high-voltage lithium-ion battery10.1021/acsenergylett.4c00519 ↗
25. Unlocking superior safety, rate capability, and low-temperature performances in LiFePO4 power batteries
26. Ethyl methyl sulfone-based electrolytes for lithium ion battery applications10.3390/en10091312 ↗
27. Deciphering reduction stability of sulfone and fluorinated sulfone electrolytes:insight from quantum chemical calculations10.1016/j.chemphys.2023.111840 ↗
28. A thermodynamic cycle-based electrochemical windows database of 308 electrolyte solvents for rechargeable batteries10.1002/adfm.202212342 ↗
29. Fundamentals and advances of ligand field theory in understanding structure-electrochemical property relationship of intercalation-type electrode materials for rechargeable batteries10.1016/j.pmatsci.2022.101055 ↗
30. Electrochemical stability windows of sulfone-based electrolyte system for lithium metal batteries: insight from MD-assisted DFT calculation10.1021/acs.jpcc.3c03661 ↗
31. High Voltage LiCoO2 Cathodes with High Purity Lithium Bis(oxalate) Borate (LiBOB) for Lithium-Ion Batteries10.1021/acsaem.2c01789 ↗
32. trimethyl borate as film-forming electrolyte additive to improve high-voltage performances10.1021/acsami.9b03417 ↗
33. (Phenylsulfonyl)acetonitrile as a High-Voltage Electrolyte Additive to Form a Sulfide Solid Electrolyte Interface Film to Improve the Performance of Lithium-Ion Batteries10.1021/acs.jpcc.9b02836 ↗
34. 3-(Phenylsulfonyl)propionitrile as a higher voltage bifunctional electrolyte additive to improve the performance of lithium-ion batteries10.1039/C8TA04558E ↗
35. Thiophene derivatives as novel functional additives for high-voltage LiCoO2 operations in lithium ion batteries10.1016/j.electacta.2014.11.062 ↗
36. B-/Si-containing electrolyte additive efficiently establish a stable interface for high-voltage LiCoO2 cathode and its synergistic effect on LiCoO2/graphite pouch cells10.1016/j.jcis.2023.03.156 ↗
37. A new fluorinated sultone as multifunctional electrolyte additive for high-performance LiCoO2/graphite cell10.1002/celc.202100352 ↗
38. Enhancing the electrochemical performance of a high-voltage LiCoO2 cathode with a bifunctional electrolyte additive10.1021/acsaem.1c02593 ↗
39. A multifunctional thiophene-based electrolyte additive for lithium metal batteries using high-voltage LiCoO2 cathode10.1149/2.0291914jes ↗
40. 2-(Trifluoroacetyl) thiophene as an electrolyte additive for high-voltage lithium-ion batteries using LiCoO2 cathode10.1016/j.jmst.2019.11.002 ↗
41. Large polarization of Li4Ti5O12 lithiated to 0 V at large charge/discharge rates10.1021/acsami.6b04239 ↗
42. Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V10.1016/j.electacta.2003.10.019 ↗
43. Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration
44. Stabilizing the LiCoO2 interface at high voltage with an electrolyte additive 2,4,6-Tris(4-fluorophenyl)boroxin10.1021/acssuschemeng.1c05936 ↗
45. Delayed phase transition and improved cycling/thermal stability by spinel LiNi0.5Mn1.5O4 modification for LiCoO2 cathode at high voltages10.1021/acsami.0c02459 ↗
46. Li+ Insertion/extraction properties for TiNb2O7 single particle characterized by a particle-current collector integrated microelectrode10.1149/2.0241903jes ↗
47. Enhancement of electrochemical performance of LiCoO2 cathode material at high cut-off voltage (4.5 V) by partial surface coating with graphene nanosheets10.20964/2020.09.07 ↗
48. Preparation, structural, magnetic, and AC electrical properties of synthesized CoFe2O4 nanoparticles and its PVDF composites10.1016/j.matchemphys.2024.129041 ↗
49. Single-phase mixed transition metal carbonate encapsulated by graphene: facile synthesis and improved lithium storage properties10.1002/adfm.201705817 ↗
50. Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode10.1016/j.ensm.2018.02.016 ↗
51. Cobalt-embedded porous carbon derived from a facile in-situ strategy enables improved lithium storage performance of silicon anode10.1016/j.jallcom.2023.170518 ↗
52. Li3PO4-enriched SEI on graphite anode boosts Li+ De-solvation enabling fast-charging and low-temperature lithium-ion batteries
53. High-voltage performance of LiCoO2/graphite batteries with methylene methanedisulfonate as electrolyte additive10.1016/j.jpowsour.2012.07.026 ↗
54. Enhanced high voltage cyclability of LiCoO2 cathode by adopting poly[bis-(ethoxyethoxyethoxy)phosphazene] with flame-retardant property as an electrolyte additive for lithium-ion batteries10.1016/j.apsusc.2017.01.189 ↗
55. Electromagnetic properties of carbon nanotube/BaFe12−xGaxO19/epoxy composites with random and oriented filler distributions10.3390/nano11112873 ↗
56. Amide-functional, Li3N/LiF-Rich heterostructured electrode electrolyte interphases for 4.6 V Li||LiCoO2 batteries10.1002/aenm.202300084 ↗
57. Surface film formation on electrodes in a LiCoO2/graphite cell: a step by step XPS study10.1016/j.jpowsour.2007.06.033 ↗
58. Investigation of solid electrolyte interface (SEI) film on LiCoO2 cathode in fluoroethylene carbonate (FEC)-containing electrolyte by 2D correlation X-ray photoelectron spectroscopy (XPS)10.1016/j.molstruc.2014.01.041 ↗
59. XPS investigation of the electrolyte induced stabilization of LiCoO2 and “AlPO4”-coated LiCoO2 composite electrodes10.1149/2.0851602jes ↗
60. Electrolyte reactions with the surface of high voltage LiNi0.5Mn1.5O4 cathodes for lithium-ion batteries10.1149/1.3428515 ↗
61. Quercetin as electrolyte additive for LiNi0.5Mn1.5O4 cathode for lithium-ion secondary battery at elevated temperature10.1016/j.jpowsour.2016.10.079 ↗
62. Magnetic properties of anion-deficient La1−xBaxMnO3−x/2 (0≤x≤0.30) manganites10.1134/1.1545390 ↗
63. Impact of In3+ cations on structure and electromagnetic state of M−type hexaferrites10.1016/j.jechem.2021.12.027 ↗
64. A novel bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability10.1002/advs.201900355 ↗
65. Self-healing properties of alkali metals under “high-energy conditions” in batteries10.1002/aenm.202100470 ↗
66. Designing compatible ceramic/polymer composite solid-state electrolyte for stable silicon nanosheet anodes10.1002/smll.202309724 ↗