Enhanced lithium storage performance of MoS2/C3N4 composites based on the structure design by controlling the amount of C3N4
Source abstract
Abstract
In this paper, MoS 2/C 3N 4 composites are prepared using a simple hydrothermal method, with alterations made to the weight of the g-C 3N 4 precursor, to explore the influence of C 3N 4 amount on lithium storage ability and other properties such as morphological/structural change. The support of C 3N 4 enhances the electronic conductivity of MoS 2 and reduces the volume change of MoS 2 as it undergoes continuous charging and discharging. Besides, the good formation of MoS 2/C 3N 4 heterostructure, which is generated by the appropriate addition of the precursors, supplies more active sites for Li + and leads to faster ionic diffusion rate and electronic transfer speed. Profiting from the above advantages, the MCN-100 could retain excellent reversible capacity of 533.2 mAh/g even under ultrahigh current of 5 A/g after 100 cycles and exhibited superior rate performance of 1414.4 mAh/g at 1 A/g.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · MXene and MAX Phase Materials · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Nanostructuring versus microstructuring in battery electrodes10.1038/s41578-022-00454-9 ↗
2. Densifiable ink extrusion for roll-to-roll fiber lithium-ion batteries with ultra-high linear and volumetric energy densities10.1002/adma.202211201 ↗
3. Facile synthesis of SnS2@g-C3N4 composites as high performance anodes for lithium ion batteries10.1016/j.apsusc.2021.149312 ↗
4. Data-driven capacity estimation of commercial lithium-ion batteries from voltage relaxation10.1038/s41467-022-29837-w ↗
5. Realistic fault detection of li-ion battery via dynamical deep learning10.1038/s41467-023-41226-5 ↗
6. Hollow MoS2/Co nanopillars with boosted Li-ion diffusion rate and long-term cycling stability10.1039/D1CC04292K ↗
7. Glucose assisted synthesis of 1T-MoS2/C composite anode for high-performance lithium-ion batteries10.1016/j.diamond.2022.109436 ↗
8. Dopamine-assisted synthesis of MoS2 nanosheets on carbon nanotube for improved lithium and sodium storage properties10.1021/acsaem.8b01208 ↗
9. MoS2-carbon based nanocomposites as anodes for lithium-ion batteries: a review10.1016/j.est.2024.110934 ↗
10. Nitrogen-doped graphene ribbons/MoS2 with ultrafast electron and ion transport for high-rate Li-ion batteries10.1016/j.cej.2020.127269 ↗
11. Design concepts of transition metal dichalcogenides for high-performance aqueous Zn-ion storage
12. Phase engineering of layered anode materials during ion-intercalation in Van der Waal heterostructures10.1038/s41598-023-31342-z ↗
13. 2D material-based heterostructures for rechargeable batteries10.1002/aenm.202100864 ↗
14. An improved feedforward-long short-term memory modeling method for the whole-life-cycle state of charge prediction of lithium-ion batteries considering current-voltage-temperature variation10.1016/j.energy.2022.124224 ↗
15. Three-dimensional flower-like MoS2 nanosheets grown on graphite as high-performance anode materials for fast-charging lithium-ion batteries
16. Design concepts of transition metal dichalcogenides for high-performance aqueous Zn-ion storage
17. Monolayer H-MoS2 with high ion mobility as a promising anode for rubidium (cesium)-ion batteries10.1039/D2NA00001F ↗
18. Two dimensional holey graphyne: an excellent anode and anchoring material for metal–ion and metal–sulfur batteries10.1016/j.carbon.2023.118340 ↗
19. MoS2 mediated nitrogen enriched composite material for high and fast Li-ion storage10.1016/j.apsusc.2020.146437 ↗
20. A facile synthesis of MoS2/g-C3N4 composite as an anode material with improved lithium storage capacity10.3390/ma12111730 ↗
21. Ultrathin sheets of MoS2/g-C3N4 composite as a good hosting material of sulfur for lithium–sulfur batteries10.1016/j.jpowsour.2019.05.045 ↗
22. Morphology-controlled synthesis and lithium storage properties of SnO2@C@MoS2 hollow nanospheres with petaloid and granular MoS2 nanosheets as the external layer in different solvents10.1016/j.jallcom.2020.156745 ↗
23. Structure and electrochemical performance of MoS2 based on different molybdenum-sulfur mole ratios10.1016/j.jpcs.2022.110749 ↗
24. Elucidating the synergic effect in nanoscale MoS2/TiO2 heterointerface for Na-ion storage10.1002/advs.202204837 ↗
25. One-pot synthesis of hierarchical Co1-xS/NC@MoS2/C hollow nanofibers based on one-dimensional metal coordination polymers for enhanced lithium and sodium-ion storage10.1016/j.scib.2020.05.006 ↗
26. 1T-MoS2/C composite as an efficient electrocatalyst for hydrogen evolution reaction under alkaline condition10.1016/j.jpcs.2023.111796 ↗
27. Vertically oriented MoS2 nanoflakes coated on 3D carbon nanotubes for next generation Li-ion batteries10.1088/0957-4484/27/49/495401 ↗
28. Nanoscale coupling of MoS2 and graphene via rapid thermal decomposition of ammonium tetrathiomolybdate and graphite oxide for boosting capacity of Li-ion batteries10.1016/j.carbon.2020.10.097 ↗
29. 3D nanoflower-like MoS2 grown on wheat straw cellulose carbon for lithium-ion battery anode material10.1016/j.jallcom.2022.167689 ↗
30. A CNT/MoS2@PPy composite with double electron channels and boosting charge transport for high-rate lithium storage10.1016/j.apsusc.2021.150693 ↗
31. Instant gelation synthesis of 3D porous MoS2@C nanocomposites for lithium ion batteries10.1039/C3NR05815H ↗
32. N-doped graphene/porous g-C3N4 nanosheets supported layered-MoS2 hybrid as robust anode materials for lithium-ion batteries10.1016/j.nanoen.2014.06.003 ↗
33. Nitrogen-deficient graphitic carbon nitride with enhanced performance for lithium ion battery anodes10.1021/acsnano.7b07116 ↗
34. Two-dimensional (2D)/2D interface engineering of a MoS2/C3N4 heterostructure for promoted electrocatalytic nitrogen fixation10.1021/acsami.9b18263 ↗
35. Impact of CTAB on morphology and electrochemical performance of MoS2 nanoflowers with improved lithium storage properties10.1007/s10854-017-8293-4 ↗
36. Graphene-like MoS2/amorphous carbon composites with high capacity and excellent stability as anode materials for lithium ion batteries10.1039/c1jm10174a ↗
37. Low temperature synthesis of wurtzite zinc sulfide (ZnS) thin films by chemical spray pyrolysis10.1039/c3cp43470b ↗
38. Ionic liquid assisted hydrothermal synthesis of hollow core/shell MoS2 microspheres10.1016/j.matlet.2015.08.049 ↗
39. Synthesis and structural characterization of MoS2 nanospheres and nanosheets using solvothermal method10.1007/s10853-015-9051-8 ↗
40. Structural investigation of graphitic carbon nitride via XRD and neutron diffraction10.1021/acs.chemmater.5b00411 ↗
41. Activation strategy of MoS2 as HEr electrocatalyst through doping-induced lattice strain, band gap engineering, and active crystal plane design10.1021/acsami.0c20500 ↗
42. Graphene/MoS2/FeCoNi(OH)x and graphene/MoS2/FeCoNiPx multilayer-stacked vertical nanosheets on carbon fibers for highly efficient overall water splitting10.1038/s41467-021-21742-y ↗
43. Nanostructured TiO2 sensitized with MoS2 nanoflowers for enhanced photodegradation efficiency toward Methyl Orange10.1021/acsomega.1c02194 ↗
44. Ultrathin MoS2 sheets supported on N-rich carbon nitride nanospheres with enhanced lithium storage properties10.1016/j.apsusc.2017.03.102 ↗
45. In Situ Synthesis of MoS2 on C3N4 To Form MoS2/C3N4 with Interfacial Mo–N Coordination for Electrocatalytic Reduction of N2 to NH310.1021/acssuschemeng.0c02763 ↗
46. The effects of different surfactants on the morphologies and electrochemical properties of MoS2/reduce graphene oxide composites10.1016/j.cplett.2018.12.006 ↗
47. Morphology/phase-dependent MoS2 nanostructures for high-efficiency electrochemical activity10.1016/j.jallcom.2019.152909 ↗
48. Internal electric fields drive dual S-scheme heterojunctions: insights into the role of the triple interlaced lattice10.1016/j.jcis.2023.07.086 ↗
49. Core–shell ellipsoidal MnCo2O4 anode with micro-/nano-structure and concentration gradient for lithium-ion batteries10.1021/am506292b ↗
50. Construction of SnS2@MoS2@rGO heterojunction anode and their half/full sodium ion storage performances10.1016/j.jallcom.2021.162784 ↗
51. Yolk-shell FeSe2@CoSe2/FeSe2 heterojunction as anode materials for sodium-ion batteries with high rate capability and stability10.1016/j.jmst.2023.06.057 ↗
52. Constructing highly stable lithium storage materials by improving the bond strength of MoS2 to graphene via chitosan10.1016/j.carbon.2022.03.014 ↗
53. Glucose-induced synthesis of 1T-MoS2/C hybrid for high-rate lithium-ion batteries10.1002/smll.201805420 ↗
54. Recent advances on heterojunction-type anode materials for lithium-/sodium-ion batteries10.1002/smtd.202201025 ↗
55. A new generation of high performance anode materials with semiconductor heterojunction structure of SnSe/SnO2@Gr in lithium-ion batteries10.1016/j.cej.2018.04.125 ↗
56. Silicon-nanoparticle-based composites for advanced lithium-ion battery anodes10.1039/C9NR10652A ↗
57. Fundamental understanding and facing challenges in structural design of porous Si-based anodes for lithium-ion batteries10.1002/adfm.202301109 ↗
58. Stabilizing plasma-induced highly nitrogen-deficient g-C3N4 by heteroatom-refilling for excellent lithium-ion battery anodes10.1016/j.cej.2021.131032 ↗