Post-dynamic transformation from α to β phase and reverse transformation in Ti-10V-2Fe-3Al alloy during interrupted hot deformation
Source abstract
Abstract
Interrupted hot deformation tests were carried out to study the phase transformation behavior of Ti-10V-2Fe-3Al alloy during isothermal holding after deformation. The results show that post-dynamic transformation (post-DT) from α to β phase occurred first during isothermal holding and the meta- β phase retransformed to α phase after a long holding time. This phenomenon is quite different from α+ β titanium alloys in which only reverse transformation (RT, βα ) took place during isothermal holding. Microstructure evolution of β -matrix was also investigated and it was found that static recovery was the main softening mechanism. Furthermore, phase transformation has a great influence on the static softening and mechanical response of interrupted hot deformation. Due to the occurrence of post-DT, the yield strength of reloading pass reduced and became lower than the initial pass when the holding time exceeds 900 s. And significant static softening was achieved. The driving and opposing force for post-DT and RT were derived and compared based on thermodynamic analysis. Since the deformation and holding temperature is close to β-transus temperature, post-DT has a lower energy barrier which can be easily overcome by stored energy. This may explain why the phase transformation direction in Ti-10 V-2Fe-3Al alloy is opposite to that in α+ β titanium alloys during isothermal holding.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Microstructure and texture development during hot-compression of Ti532110.1016/j.matchar.2021.111297 ↗
2. Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions10.1016/j.jallcom.2022.164647 ↗
3. Acceleration of globularization during interrupted compression of a two-phase titanium alloy10.1016/j.msea.2018.02.026 ↗
4. Microstructure and mechanical properties of isothermal multidirectional forged dual-scale (TiB+Y2O3)/near-α titanium matrix composites
5. A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy10.1016/j.ijplas.2020.102862 ↗
6. Hot compressive deformation behavior and microstructure evolution of a Ti-55511 alloy with basket-weave microstructures10.1016/j.vacuum.2019.108878 ↗
7. The relationship between flow behavior and initial microstructure of Ti-10V–2Fe-3Al alloy during subtransus deformation10.1016/j.jallcom.2022.166302 ↗
8. Deformation behavior and microstructure evolution in multistage hot working of TA15 titanium alloy: on the role of recrystallization10.1007/s10853-011-5564-y ↗
9. Effect of aging treatment on microstructure, phase transformation and mechanical properties of Ni-Ti-La alloy
10. Recrystallization during thermomechanical processing of IMI83410.1007/s11661-008-9666-3 ↗
11. Effect of multi-pass deformation on hot flow behavior and microstructure evolution mechanism of Ti-6Al-4V alloy fabricated by hot isostatic pressing10.1016/j.jmrt.2022.01.136 ↗
12. Evolution of the α phase and microhardness for hot isostatic pressed Ti-6Al-4V alloy during multi-pass deformation10.1016/j.matchar.2021.111263 ↗
13. Effect of initial lamellar structure on globularization of hot multi-forged ELI grade Ti-6Al-4V alloy10.4028/www.scientific.net/MSF.558-559.529 ↗
14. Stress-induced phase transformation during superplastic deformation in two-phase Ti-Al-Fe alloy10.1016/S1359-6454(00)00049-5 ↗
15. Reverse transformation behavior of Ti-6Al-4V after deformation in the two-phase region10.1007/s11661-017-4403-4 ↗
16. Opposing and driving forces associated with the dynamic transformation of Ti-6Al-4V10.1007/s10853-018-2237-0 ↗
17. Transformation softening in three titanium alloys10.1016/j.matdes.2016.10.039 ↗
18. Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium10.1016/j.scriptamat.2017.02.022 ↗
19. Kinetics of post-dynamic coarsening and reverse transformation in Ti-6Al-4V10.1007/s11661-018-4952-1 ↗
20. Dynamic transformation of Ti-6Al-4V during torsion in the two-phase region10.1007/s10853-018-2237-0 ↗
21. Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region10.1016/j.matdes.2019.108466 ↗
22. Modeling the dynamic recrystallization under multi-stage hot deformation10.1016/j.actamat.2004.06.022 ↗
23. Modeling and simulation of the static recrystallization of 5754 aluminium alloy by cellular automaton10.3390/met8080585 ↗
24. Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels10.1016/j.msea.2015.10.123 ↗
25. Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling10.1016/j.msea.2015.09.063 ↗
26. The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy10.1016/j.msea.2012.05.039 ↗
27. Static softening behavior and modified kinetics of Al 2219 alloy based on a double-pass hot compression test10.3390/ma13173862 ↗
28. Dynamic and static softening mechanisms of commercial-purity Zr during double-stage hot compressive deformation10.1016/j.msea.2021.141578 ↗
29. Deformation behavior and microstructure evolution in multistage hot working of TA15 titanium alloy: on the role of recrystallization10.1007/s10853-011-5564-y ↗
30. Dynamic transformation of deformed austenite at temperatures above the Ae310.1016/j.pmatsci.2016.04.004 ↗
31. Thermodynamic transformation of hot deformed austenite in four steels of increasing carbon contents10.1016/j.msea.2013.10.077 ↗
32. Parker · 1997 · 145
33. Modelling the effect of deformation-induced vacancies on segregation and precipitation10.1016/0956-7151(94)90056-6 ↗
34. Effect of Mn and Si on the dynamic transformation of austenite above the Ae3 temperature10.1016/j.actamat.2014.08.060 ↗
35. Role of mechanical activation in the dynamic transformation of austenite10.1016/j.actamat.2013.06.054 ↗
36. Variant selection during cooling after beta annealing of Ti-6Al-4V ingot material10.1007/s11661-012-1245-y ↗
37. second ed
38. Deformation induced ferrite transformation in low carbon steels10.1016/j.cossms.2006.02.014 ↗
39. Numerical simulation of dynamic strain-induced austenite-ferrite transformation in a low carbon steel10.1016/j.actamat.2009.03.005 ↗