journal article·2024-05

Evolution of solidification structure and mechanical properties of Al7050 alloy under hypergravity

Fangjie You, Xinbao Zhao, Quanzhao Yue, Jiahui Wang, Yuefeng Gu, Ze Zhang

Publisher page

Abstract

The article discussed the effects of hypergravity fields on the dendrite structure, macrosegregation , and mechanical properties of Al7050 alloy. Compared to normal gravity, the average size of α-Al grains at the bottom of the sample was significantly reduced under hypergravity. The melt superheating temperature influenced atomic clusters, which, along with dendrite fragmentation, facilitated heterogeneous nucleation. Subsequently, the "crystal rain" mechanism led to the migration and accumulation of primary crystals. The emergence of coarse columnar dendrites under hypergravity may result from high-speed forced convection transferring solutes at the dendrite tips, thereby promoting dendrite growth through increased concentration gradients. Under hypergravity, Zn, Mg, and Cu elements were enriched at the bottom of the sample, possibly due to solutes expelled during α-Al dendrite growth entering the liquid phase. The denser solute-rich liquid settled at the bottom under hypergravity, precipitating numerous secondary phases. The compressive strength and strain of the hypergravity specimen increased due to its special density-dependent layered structure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al–Si alloy10.1016/j.jallcom.2019.152701 ↗
2. Hypergravity experiments on multiphase media evolution10.1007/s11431-022-2125-x ↗
3. Thermosolutal convection and macrosegregation during directional solidification of TiAl alloys in centrifugal casting10.1016/j.ijheatmasstransfer.2020.119698 ↗
4. Columnar dendritic solidification of TiAl under diffusive and hypergravity conditions investigated by phase-field simulations10.1016/j.commatsci.2019.109358 ↗
5. A review on solidification of alloys under hypergravity10.1016/j.pnsc.2023.08.012 ↗
6. Effect of zero, normal and hyper-gravity on columnar dendritic solidification and the columnar-to-equiaxed transition in Neopentylglycol-(D)Camphor alloy10.1016/j.jcrysgro.2019.01.043 ↗
7. Refining mechanism and elevated-temperature mechanical properties of Al-Ce alloys solidified under super gravity field10.1016/j.msea.2023.145191 ↗
8. An Analysis of Solidification Experiments With a Ti-46Al-8Nb alloy under centrifugal conditions: modelling of flow–solidification interaction and grain structure evolution using a cellular automaton with finite volume method10.1007/s11663-022-02676-2 ↗
9. X.C. Ye, Analysis on thermodynamnics and dynamics of the microstucture solidified under centrifugal pressure, Harbin Institute of Technology, 2006. 〈https://kns.cnki.net/KCMS/detail/detail.aspx?dbcode=CMFD&dbname=CMFD0506&filename=2006171306.nh&v=〉.
10. Migration of Liquid Droplets in Solids
11. Solidification of Undercooled liquid under supergravity field by phase-field crystal approach10.3390/met12020232 ↗
12. Effects of different process parameters on microstructure evolution and mechanical properties of 2060 Al–Li alloy during vacuum centrifugal casting10.1016/j.jmrt.2022.08.147 ↗
13. Effect of processing factors on the characteristics of centrifugal casting
14. Effect of Super-gravity Field on Grain Refinement and Tensile Properties of Cu–Sn Alloys10.2355/isijinternational.ISIJINT-2017-233 ↗
15. Relaminarization by Steady Modification of the Streamwise Velocity Profile in a Pipe10.1007/s10494-018-9896-4 ↗
16. Numerical modeling of melting and columnar solidification with convection in a gradient zone furnace in a centrifuge10.1007/s11663-020-01914-9 ↗
17. Phase Field Modeling of β(Ti) Solidification in Ti-45at%Al: Columnar Dendrite Growth at Various Gravity Levels10.4028/www.scientific.net/MSF.790-791.34 ↗
18. Influence of super-gravity coefficient on spatial distribution of solidification structure in Al-14.5Si alloys10.1016/j.jmrt.2021.10.106 ↗
19. Recovery of rutile from Ti-Bearing blast furnace slag through phase transformation and super-gravity separation for dielectric material10.1016/j.ceramint.2019.12.264 ↗
20. Preparation of TiC ceramics from hot Ti-bearing blast furnace slag: Carbothermal reduction, supergravity separation and spark plasma sintering10.1016/j.jeurceramsoc.2021.12.047 ↗
21. Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites10.1016/j.matchar.2010.06.002 ↗
22. Developments in Processing of Functionally Gradient Metals and Metal–Ceramic Composites: A Review10.1007/s40195-014-0142-3 ↗
23. Effect of the melt superheat on equiaxed solidification of Al-20wt% Cu alloy investigated by in situ synchrotron radiography10.1016/j.jcrysgro.2017.07.001 ↗
24. Effects of melt treatment on the cast structure of M963 superalloy10.1016/S1359-6462(02)00446-3 ↗
25. Effect of melt superheating treatment on the cast microstructure of Mg–1.5Si–1Zn alloy10.1007/s10853-007-2275-5 ↗
26. Influence of melt thermal history on structure of melt Al-Cu alloy
27. Hysteressis effect on some physical properties of melt superheat
28. Effects of d.c. current on the phase transformation in 7050 alloy during homogenization10.1016/j.matchar.2014.07.017 ↗
29. Y. Liu, Y. Cui, D.M. Jiang, Effect of Alloy Composition on Solidified Crystalline Phase of Al-Zn-Mg-Cu Alloy, Hot Working Technology (n.d.) 1–4.
30. Influence of gravity level on Columnar-to-Equiaxed Transition during directional solidification of Al – 20 wt% Cu alloys10.1016/j.actamat.2016.03.007 ↗
31. Influences of Super-Gravity Field on Aluminum Grain Refining10.1007/s11661-009-0130-9 ↗
32. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method10.3390/ma2042510 ↗
33. M.C. Fernández, M. Založnik, H. Combeau, C. Huang, J. Zollinger, U. Hecht, Effect of the Coriolis force on the macrosegregation of aluminum in the centrifugal casting of Ti-Al alloys, IOP Conf. Ser.: Mater. Sci. Eng. 529 (2019) 012033. https://doi.org/10.1088/1757-899X/529/1/012033.10.1088/1757-899X/529/1/012033 ↗
34. Quantification study on dendrite fragmentation in solidification process of alluminum alloys
35. Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach10.1016/j.jcp.2013.10.004 ↗
36. Influence of natural and forced gravity conditions during directional columnar solidification10.1016/j.ijheatmasstransfer.2018.05.151 ↗
37. Mesoscopic modeling of equiaxed and columnar solidification microstructures under forced flow and buoyancy-driven flow in hypergravity: envelope versus phase-field model10.1016/j.actamat.2020.07.069 ↗
38. Multi-GPUs parallel computation of dendrite growth in forced convection using the phase-field-lattice Boltzmann model10.1016/j.jcrysgro.2016.11.103 ↗
39. Experimental study of the solidification of Sn–10wt%Pb alloy under different forced convection in benchmark experiment10.1016/j.ijheatmasstransfer.2015.01.145 ↗
40. Macrosegregation behavior of solute Cu in the solidifying Al-Cu alloys in super-gravity field10.1051/metal/2018025 ↗
41. Microgravity and hypergravity observations of equiaxed solidification of Al-Cu alloys using in situ X-radiography recorded in real-time on board a parabolic flight10.4028/www.scientific.net/MSF.790-791.52 ↗
42. Liquid flow pattern transition, droplet diameter and size distribution in the cavity zone of a rotating packed bed: A visual study10.1016/j.ces.2016.10.044 ↗
43. High-gravity reaction process intensification and its industrial applications
44. Influence of Zn, Mg and Cu Elements on As-cast Microstructure and Properties of Al-Zn-Mg-Cu-Zr-Er Aluminum Alloy
45. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
46. Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
47. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗