Enhanced thermoelectric performance of n-type Bi2Te2.7Se0.3 by pyrite CoSe2 addition
Source abstract
Abstract
In this work, the thermoelectric (TE) performances of n-type Bi 2Te 2.7Se 0.3 with the addition of pyrite CoSe 2 were studied. The findings reveal an in-situ reaction between Bi 2Te 2.7Se 0.3 and CoSe 2 during the SPS process, resulting in the formation of a secondary phase, CoTe 2, which refined the microstructure of Bi 2Te 2.7Se 0.3 . Consequently, the electrical conductivity and Seebeck coefficient of Bi 2Te 2.7Se 0.3 were simultaneously optimized, attaining a higher power factor of 30.2 μW cm −1 K −2 at room temperature. Additionally, due to the reduced average sound velocity and phonon mean free path, the lattice thermal conductivity of Bi 2Te 2.7Se 0.3 was suppressed by the incorporation of CoSe 2 . Furthermore, the bipolar thermal conductivity also experienced slight suppression at elevated temperatures. Ultimately, a substantial figure of merit of 0.85 was achieved at 423 K for n-type Bi 2Te 2.7Se 0.3 with the addition of 3 mol% CoSe 2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Screening strategy for developing thermoelectric interface materials10.1126/science.adg8392 ↗
2. Advances in the design and assembly of flexible thermoelectric device10.1016/j.pmatsci.2022.101003 ↗
3. Thermoelectric converter: Strategies from materials to device application10.1016/j.nanoen.2021.106692 ↗
4. Mechanical properties of thermoelectric generators10.1016/j.jmst.2022.10.081 ↗
5. Thermoelectric generators: a comprehensive review of characteristics and applications10.1016/j.applthermaleng.2021.117793 ↗
6. Thermoelectric coolers: progress, challenges, and opportunities10.1002/smtd.202101235 ↗
7. Micro-thermoelectric devices10.1038/s41928-022-00776-0 ↗
8. Recent advances in modeling and simulation of thermoelectric power generation10.1016/j.enconman.2022.116389 ↗
9. Structural optimization of thermoelectric modules in a concentration photovoltaic–thermoelectric hybrid system10.1016/j.energy.2022.123202 ↗
10. Advances in thermoelectric materials research: Looking back and moving forward10.1126/science.aak9997 ↗
11. Carrier grain boundary scattering in thermoelectric materials10.1039/D1EE03802H ↗
12. Ag2Q‐based (Q= S, Se, Te) silver chalcogenide thermoelectric materials10.1002/adma.202110236 ↗
13. Tuning band structure and texture for improved thermoelectric performance in BiSe10.1016/j.jallcom.2023.170482 ↗
14. Effects of AgSnSe2 addition on the thermoelectric properties of Bi0. 5Sb1. 5Te310.1016/j.jallcom.2023.170399 ↗
15. Enhanced thermoelectric properties of Bi2O2Se by Bi2Te2. 7Se0. 3 addition10.1016/j.jallcom.2022.167439 ↗
16. Remarkable effects of shear-exfoliation and restacking on microstructural texturing and thermoelectric properties of AgCrSe210.1016/j.jallcom.2023.170504 ↗
17. SrCuP and SrCuSb Zintl phases as potential thermoelectric materials10.1016/j.jallcom.2023.169123 ↗
18. Cu-doping boosts the thermoelectric properties of layered compound LaOBiS2 with weak anisotropy10.1016/j.jallcom.2023.169601 ↗
19. Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy10.1016/j.jallcom.2023.169416 ↗
20. Chromium ditelluride monolayer: a novel promising 2H phase thermoelectric material with direct bandgap and ultralow lattice thermal conductivity10.1016/j.jallcom.2022.167485 ↗
21. Thermoelectric properties of Ru2TiGe heusler phase
22. Thermoelectric properties of p-type Mg2Si0.3Sn0.7 doped with silver and gallium10.1016/j.jallcom.2023.169270 ↗
23. High thermoelectric properties of shear-exfoliation-derived TiS2-AgSnSe2 nano-composites via ionized impurity scattering10.1016/j.actamat.2022.118564 ↗
24. Graphite nanosheets as multifunctional nanoinclusions to boost the thermoelectric performance of the shear‐exfoliated Bi2O2Se10.1002/adfm.202202927 ↗
25. Unlocking the thermoelectric potential of the Ca14AlSb11 structure type10.1126/sciadv.abq3780 ↗
26. Harvesting waste heat with flexible Bi2Te3 thermoelectric thin film10.1038/s41893-022-01003-6 ↗
27. Staggered-layer-boosted flexible Bi2Te3 films with high thermoelectric performance10.1038/s41565-023-01457-5 ↗
28. A comprehensive review on the effects of doping process on the thermoelectric properties of Bi2Te3 based alloys10.1016/j.jallcom.2022.163918 ↗
29. Optimized thermoelectric performance in thin (Bi2Se3)1−x(Bi2Te3)x alloyed films10.1016/j.jallcom.2021.162888 ↗
30. Modulation of vacancy defects and texture for high performance n-type Bi2Te3 via high energy refinement10.1002/smll.202300654 ↗
31. Enhanced thermoelectric performance of n -type Bi2 Te2.7Se0.3 via a simple liquid-assisted shear exfoliation10.1016/j.jmst.2021.12.019 ↗
32. Unique microstructures and high thermoelectric performance in n-type Bi2Te2.7Se0.3 by the dual incorporation of Cu and Y
33. Employing multi-functional SnSe inclusions to boost the thermoelectric performance of the shear-exfoliated Bi2Te2.7Se0.310.1016/j.actamat.2023.119023 ↗
34. Pyrite-type nanomaterials for advanced electrocatalysis10.1021/acs.accounts.7b00187 ↗
35. Ultralow in-plane thermal conductivity in 2D magnetic mosaic superlattices for enhanced thermoelectric performance10.1021/acsnano.2c03978 ↗
36. Enhanced thermoelectric performance of n-type PbSe by pyrite FeSe2 alloying10.1016/j.jallcom.2023.169008 ↗
37. Thermoelectric investigation of the pseudo binary system PbTe-CoSe210.1007/s11664-015-3665-0 ↗
38. Effect of spark plasma sintering temperature on microstructure and thermoelectric properties of the cermet composites consisting of Bi2Te2.1Se0.9 matrix and Co@CoTe2 inclusions10.1016/j.jssc.2021.122696 ↗
39. Realization of an ultrahigh power factor and enhanced thermoelectric performance in TiS2 via microstructural texture engineering10.1021/acsami.0c09592 ↗
40. Excellent thermoelectric performance from in situ reaction between Co nanoparticles and BiSbTe flexible films10.1021/acsami.1c19143 ↗
41. Unconventionally layered CoTe2 and NiTe2 as electrocatalysts for hydrogen evolution10.1002/chem.201702753 ↗
42. Microstructure and thermoelectric properties of marcasite-type compounds XTe2 (X = Fe, Co, Ni) prepared by solid-state reaction10.1007/s10854-023-09915-5 ↗
43. Approach to determine the density-of-states effective mass with carrier concentration-dependent seebeck coefficient10.1002/adfm.202203852 ↗
44. Precise regulation of carrier concentration in thermoelectric BiSbTe alloys via magnetic doping10.1021/acsami.0c02408 ↗
45. N-type Bi2Te3-xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings10.1021/acsnano.6b01156 ↗
46. Enhanced thermoelectric performance of Bi2Te2.7Se0.3/Bi2S3 synthesized by anion exchange method10.1002/pssr.201900679 ↗
47. Enhanced thermoelectric properties of n-type Bi2Te2.7Se0.3 materials by TiO2 ceramic nanoparticle dispersion-induced energy filtering effect10.1016/j.ceramint.2023.07.183 ↗
48. Enhanced thermoelectric performance of N-type Bi2Te2.7Se0.3-based materials by superparamagnetic Fe3O4 nanoparticles10.1016/j.ceramint.2022.10.355 ↗
49. Improving the thermoelectric properties of Bi2Te2.7Se0.3 through La2O3 dispersion10.1007/s00339-022-06261-x ↗
50. Ultralow thermal conductivity and high thermoelectric performance of n-type Bi2Te2.7Se0.3-based composites incorporated with GaAs nanoinclusions10.1021/acsami.0c09338 ↗
51. Effects of Ni magnetic nanoparticles on thermoelectric properties of n-Type Bi2Te2.7Se0.3 materials10.1007/s11664-020-07956-8 ↗
52. Enhanced thermoelectric and mechanical properties of n-type Bi2Te2.7Se0.3 bulk alloys by electroless plating with Cu10.1007/s11595-019-2126-7 ↗