The microstructure and mechanical properties of multicomponent MgAlCe-LDO nanoparticle reinforced Mg matrix composite
Source abstract
Abstract
The strength-ductility trade-off has long challenged particle-reinforced metal matrix composites (MMCs). This paper presents a multi-component layered double oxide (LDO) interfacial structured Mg matrix composite with high strength and plasticity by introduction of Ce. The LDO contains multi-component irregular nanoparticles (MgO, CeO 2, Al 3Ce and MgAl 2O 4) bonding the matrix and MgAlCe. Especially, Ce atoms participates in the formation of Al 3Ce and are absorbed on the growing tip of β-Mg 17Al 12 , which further refine the matrix grand and β-Mg17Al12 grain significantly by inhibiting grain boundary migration. During loading, the multi-component LDO can significantly improve load-transfer enhancement and contribute to dislocation-bypass across the LDO/matrix interface. This unique multi-component interfacial structure and fine grains of MgAlCe-LDO nanoparticle reinforced Mg matrix composite contributes to the high ductility and strength (UCS:407 MPa, YS:232 MPa) by increasing 50.2%, and 139.2% without sacrificing ductility (strain 20.6%).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Hierarchical nanocomposites derived from nanocarbons and layered double hydroxides-properties, synthesis, and applications10.1002/adfm.201102222 ↗
2. Effect of CNT on microstructure, dry sliding wear and compressive mechanical properties of AZ61 magnesium alloy10.1016/j.jmrt.2019.07.037 ↗
3. Impact of the morphology of micro-and nanosized powder mixtures on the microstructure of Mg-Mg2Si-CNT composite sinters10.3390/ma12193242 ↗
4. Microstructure and mechanical properties of carbon nanotubes/AZ31 magnesium composite gas tungsten arc welding filler rods fabricated by powder metallurgy10.1016/j.diamond.2016.08.017 ↗
5. Effect of substituted aluminum in magnesium tension twin
6. Study on the mutual effect of La and Gd on microstructure and mechanical properties of Mg-Al-Zn extruded alloy10.1016/j.jallcom.2016.07.037 ↗
7. Effect of Nd addition on microstructures and mechanical properties of AZ80 magnesium alloys10.1016/S1003-6326(11)61321-6 ↗
8. Effects of rare earths on the microstructure, properties and fracture behavior of Mg–Al alloys10.1016/S0921-5093(99)00604-8 ↗
9. Effect of Ce addition on the microstructure and mechanical properties of extruded Mg-Sn-Al-Zn alloy10.1016/j.msea.2016.01.073 ↗
10. Influence of cerium on the microstructure, mechanical properties and corrosion resistance of magnesium alloy10.1016/j.msea.2006.06.109 ↗
11. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
12. Effects of mold temperature on the microstructure and tensile properties of SiCp/2024 Al-based composites fabricated via powder thixoforming10.1016/j.matdes.2016.09.049 ↗
13. Solute atom mediated hall-petch relations for magnesium binary alloys10.1016/j.scriptamat.2021.114451 ↗
14. Modelling of the age hardening behaviour of Al-Mg-Si alloys10.1016/S1359-6454(00)00301-3 ↗
15. Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys10.1016/j.jallcom.2009.02.131 ↗
16. Solid solution strengthening behaviors in binary Mg-Y single phase alloys10.1016/j.jallcom.2008.04.049 ↗
17. Microstructure and mechanical properties of Mg-4Zn-xGd (x=0, 0.5, 1, 2) alloys10.1016/j.jma.2019.06.005 ↗
18. A review on electromagnetic shielding magnesium alloys10.1016/j.jma.2021.10.001 ↗
19. Kinetic and equilibrium analyses of lactate adsorption by Cu-Al and Mg-Al layered double hydroxides (Cu-Al LDH and Mg-Al LDH) and Cu-Al and Mg-Al layered double oxides (Cu-Al LDO and Mg-Al LDO)10.1016/j.nanoso.2020.100656 ↗
20. Layered double hydroxide/multiwalled carbon nanotube hybrids as reinforcing filler in silicone rubber10.1016/j.compositesa.2013.10.011 ↗
21. Strength-ductility synergy of reduced graphene oxide/2024Al matrix composites by heterogeneous structure design and hybrid nanoparticles optimized interface10.1016/j.jallcom.2021.162757 ↗
22. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets10.1021/cr200434v ↗
23. A review on casting magnesium alloys: modification of commercial alloys and development of new alloys10.1016/j.jmst.2016.07.001 ↗
24. Cotton · 1995
25. Machine learning for alloys10.1038/s41578-021-00340-w ↗
26. Formation of random solid solution in multicomponent alloys: from Hume-Rothery rules to entropic stabilization10.1007/s11669-017-0560-9 ↗
27. Pelleg · 2013 · Vol. 190
28. Hall-Petch relationship in Mg alloys: a review10.1016/j.jmst.2017.07.022 ↗
29. Correlating dislocation mobility with local lattice distortion in refractory multi-principal element alloys10.1016/j.scriptamat.2022.115048 ↗
30. Grain level analysis of crack initiation and propagation in brittle materials10.1016/S1359-6454(01)00292-0 ↗
31. Thermal decomposition characteristics of retained austenite and its influence on impact toughness of B-containing 9Cr1Mo1Co (FB2) steel during the two-step tempering10.1016/j.jmrt.2021.03.105 ↗