journal article·2024-03

High-energy LiNi0.90Co0.04Mn0.03Al0.03O2 cathode material with lithium-reactive Li0.34La0.56TiO3 coating and Li2NiO2 lithium supplying for enhanced performance lithium-ion batteries

Hanwei Yan, Junchao Qian, XingLiang Yin, Feng Chen

Publisher page

Abstract

In the work, we have focused on the surface variations of the LiNi 0.90Co 0.04Mn 0.03Al 0.03O 2 induced by the lithium ion conductor Li 0.34La 0.56TiO 3 and over-lithiated oxide Li 2NiO 2 double coverings. The influence of various covering materials on particles morphology, crystal structure and electrochemical properties have been explored. It is found that the Li 0.34La 0.56TiO 3 firm layer could reduce the catalytic decomposition of electrolyte and further maintain the stable particles morphology and crystal structure of cathode after long-term cycling. In addition, the Li 2NiO 2 served as the lithium supplement additive could compensate the irreversible active lithium ions loss during cycling and then relieve the cyclic capacity attenuation. Comparatively, the cathodes after Li 0.34La 0.56TiO 3 coating deliver the obvious enhanced rate capability, superior discharging capacity at low temperature and more stable cyclic performance than those of pristine LiNi 0.90Co 0.04Mn 0.03Al 0.03O 2. Besides, the Li 0.34La 0.56TiO 3 and Li 2NiO 2 co-coated sample demonstrates the superior safety performance and cyclic stability when applied in the pouch battery in comparison with the pristine cathode.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Building a stabilized structure from surface to bulk of Ni-rich cathode for enhanced electrochemical performance10.1016/j.ensm.2022.01.056 ↗
2. Chemical-mechanical effects in Ni-rich cathode materials10.1021/acs.chemmater.1c03051 ↗
3. Improvement of electrochemical reversibility of the Ni-Rich cathode material by gallium doping10.1016/j.jpowsour.2019.227337 ↗
4. Bulk and surface degradation in layered Ni-rich cathode for Li ions batteries: defect proliferation via chain reaction mechanism10.1016/j.ensm.2020.11.016 ↗
5. Understanding the enhancement effect of boron doping on the electrochemical performance of single-crystalline Ni-rich cathode materials10.1016/j.jcis.2021.07.027 ↗
6. Electrochemical effects and magnetic properties of B substituted LiCoO2: improving Li-battery10.1016/j.jallcom.2015.10.080 ↗
7. Improvement on high rate performance of LiFePO4 cathodes using graphene as a conductive agent10.1016/j.apsusc.2018.01.201 ↗
8. Effect of the electrode potential on the surface composition and crystal structure of LiMn2O4 in aqueous solutions10.1016/j.electacta.2018.02.108 ↗
9. Investigation of the crystal and magnetic structures of BaFe12-xAlxO19 solid solutions (x = 0.1-1.2)10.1134/S1063774515030220 ↗
10. Phase transformations in FeCo-Fe2CoO4/Co3O4-spinel nanostructures as a result of thermal annealing and their practical application
11. Bulk and surface degradation in layered Ni-rich cathode for Li ions batteries: defect proliferation via chain reaction mechanism10.1016/j.ensm.2020.11.016 ↗
12. Conversion of residual lithium into fast ionic conductor coating to achieve one-step double modification strategy in LiNi0.8Co0.15Al0.05O210.1016/j.jallcom.2022.167638 ↗
13. Understanding the enhancement effect of boron doping on the electrochemical performance of single-crystalline Ni-rich cathode materials10.1016/j.jcis.2021.07.027 ↗
14. Protective and ion conductive: Ni-rich cathode with enhanced electrochemical performance via dual-modification10.1016/j.apsusc.2023.157700 ↗
15. Quaternary layered Ni-rich NCMA cathode for lithium-ion batteries10.1021/acsenergylett.8b02499 ↗
16. Microstrain alleviation in high-energy Ni-rich NCMA cathode for long battery life10.1021/acsenergylett.0c02281 ↗
17. Effect of dual improved electronic and cationic conductivity via W doping on cyclability and rate performance of LiNi0.90Co0.04Mn0.03Al0.03O2 cathode for rechargeable LiBs10.1016/j.est.2023.107088 ↗
18. Surface-modified quaternary layered Ni-rich cathode materials by Li2ZrO3 for improved electrochemical performance for high-power Li-ion batteries10.1021/acsaem.2c00224 ↗
19. Preparation of long-term cycling stable ni-rich concentration–gradient NCMA cathode materials for li-ion batteries10.1016/j.jcis.2023.02.064 ↗
20. Tri(2-furyl)phosphine-induced robust interphases for durable Nickel-rich Lithium-ion batteries10.1016/j.apsusc.2023.157027 ↗
21. A review on doping/coating of Nickel-rich cathode materials for Lithium-ion batteries10.1016/j.jallcom.2019.153048 ↗
22. Enhancing cell performance of lithium-rich manganese-based materials via tailoring crystalline states of a coating layer10.1021/acsami.1c11180 ↗
23. 3D vertically aligned microchannel three-layer all ceramic Lithium ion battery for high-rate and long-cycle electrochemical energy storage10.1002/smll.202107442 ↗
24. Overlithiation lithium-rich Mn-based oxide as cathode pre-lithiation agent towards high-energy-density batteries10.1016/j.cej.2023.144744 ↗
25. Enhanced cycling and structure stability of an electron transfer-accelerating polymer poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)-covered Mn-based layered cathode with Ga3+ doping for a Li-ion battery10.1021/acs.langmuir.2c03462 ↗
26. Li2NiO2 as a sacrificing positive additive for lithium-ion batteries10.1016/j.electacta.2013.06.117 ↗
27. Investigating Li2NiO2-Li2CuO2 solid solutions as high-capacity cathode materials for Li-ion batteries10.1021/acs.jpcc.7b01799 ↗
28. Synthesis, structural properties and shielding efficiency of glasses based on TeO2-(1-x)ZnO-xSm2O3
29. Impact of Nd3+ substitutions on the structure and magnetic properties of nanostructured SrFe12O19 hexaferrite10.3390/nano12193452 ↗
30. Structure and magnetodielectric properties of titanium substituted barium hexaferrites10.1016/j.ceramint.2021.03.041 ↗
31. Impact of In3+ cations on structure and electromagnetic state of M-type hexaferrites10.1016/j.jechem.2021.12.027 ↗
32. Optimized Ni-Rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material by Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries10.1016/j.jallcom.2022.166277 ↗
33. Boron doping and LiBO2 coating synergistically enhance the high-rate performance of LiNi0.6Co0.1Mn0.3O2 cathode materials10.1021/acssuschemeng.0c09265 ↗
34. Synergistic effect of Na and Al co-doping on the electrochemical properties of LiNi0.8Mn0.1Co0.1O2 cathode materials for Li-ion batteries10.1016/j.jallcom.2022.166678 ↗
35. Which of the nickel-rich NCM and NCA is structurally superior as a cathode material for lithium-ion batteries?10.1039/D1TA01128F ↗
36. Microstructural and electrochemical study of La0.5Li0.5TiO310.1016/j.matchemphys.2010.12.021 ↗
37. Synthesis electrochemical properties, and phase stability of Li2NiO2 with the Immm structure10.1021/cm049922h ↗
38. Significance of gallium doping for high Ni, low Co/Mn layered oxide cathode material10.1016/j.cej.2022.135821 ↗
39. Magnetic properties of anion-deficient La1-xBaxMnO3-x/2 (0≤x≤0.30) manganites10.1134/1.1545390 ↗
40. Evaluation of the efficiency of detection and capture of manganese in aqueous solutions of FeCeOx nanocomposites doped with Nb2O510.3390/s20174851 ↗
41. Correlated biphasic features of improved rate capability upon Ga doping in LiNi0.6Mn0.2Co0.2O210.1039/D1TA05676J ↗
42. Suppressing Ni/Li disordering in LiNi0.6Mn0.2Co0.2O2 cathode material for Li-ion batteries by rare earth element doping10.1016/j.egyr.2022.03.029 ↗
43. Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of Li-ion battery10.1002/aenm.201901756 ↗
44. Enhanced cyclability and reversibility of nickel-rich cathode for lithium- ion batteries via LiH2PO4 assisted saturated Li2CO3 washing10.1016/j.apsusc.2022.153409 ↗
45. High performance single-crystal Ni-rich cathode modification via crystalline LLTO nanocoating for all-solid-state Lithium batteries10.1021/acsami.1c18264 ↗
46. Li-rich Li2[Ni0.8Co0.1Mn0.1]O2 for anode-free Lithium metal batteries10.1002/anie.202017063 ↗
47. Mechanism of the interfacial reaction between cation-deficient La0.56Li0.33TiO3 and metallic lithium at room temperature10.1557/JMR.2008.0255 ↗
48. Nanoscale coating of LiMO2 (M = Ni, Co, Mn) nanobelts with Li+-conductive Li2TiO3: toward better rate capabilities for Li-ion batteries10.1021/ja308717z ↗
49. Enhanced cycling performance of surface-doped LiMn2O4 modified by a Li2CuO2-Li2NiO2 solid solution for rechargeable lithium-ion batteries10.1016/j.electacta.2016.12.041 ↗
50. Excellent high rate capability and high voltage cycling stability of Y2O3-coated LiNi0.5Co0.2Mn0.3O210.1016/j.jpowsour.2014.05.047 ↗
51. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes10.1016/j.nanoen.2021.106665 ↗
52. Electrochemical properties and gas evolution behavior of overlithiated Li2NiO2 as cathode active mass for rechargeable Li ion batteries10.1149/2.105206jes ↗
53. Effects of magnesium and fluorine co-doping on the structural and electrochemical performance of the spinel LiMn2O4 cathode materials10.1016/j.electacta.2014.09.115 ↗
54. In situ constructing ultrastable mechanical integrity of single-crystalline LiNi0.9Co0.05Mn0.05O2 cathode by interior and exterior decoration strategy
55. One-step solid-state synthesis of Ni-rich cathode materials for Lithium-ion batteries10.3390/ma16083079 ↗
56. Effect of doping of Ce4+/3+ on optical, strength and shielding properties of (0.5-x)TeO2-0.25MoO-0.25Bi2O3-xCeO2 glasses10.1016/j.matchemphys.2021.124444 ↗
57. Investigation of exchange coupling and microwave properties of hard/soft (SrNi0.02Zr0.01Fe11.96O19)/(CoFe2O4)x nanocomposites
58. Towards superior cyclability of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium ion batteries via synergetic effects of Sb modification10.1016/j.jallcom.2019.05.217 ↗
59. High-energy Ni-rich cathode materials for long-range and long-life electric vehicles10.1002/aenm.202200615 ↗
60. Slower capacity/voltage degradation of surface engineered LiNi0.92Co0.05Mn0.03O2 cathode for lithium-ion batteries10.1016/j.apsusc.2021.151017 ↗
61. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes10.1021/acsenergylett.0c00191 ↗
62. Capacity fading of Ni-rich Li[NixCoyMn1−x−y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density Lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
63. Boosting the cycling stability of Ni-rich layered oxide cathode by dry coating of ultrastable Li3V2(PO4)3 nanoparticles10.1039/D0NR08305D ↗