Effect of Mo in-situ alloying on microstructure and magnetic properties of (NiFeMo)100−xMox alloy
Source abstract
Abstract
This study aimed to modulate the magnetic properties of selective laser melting NiFeMo alloy. This was achieved via the controlled addition of Mo elemental in-situ alloying content to change the tissue morphology and crystal structure of SLM-formed (NiFeMo) 100−xMo x alloy (x = 0 wt%, 0.25 wt%, 0.5 wt%, 0.75 wt%, 1.0 wt%, 1.25 wt%, 1.5 wt%, 2.0 wt%). The results of scanning electron microscopy (SEM), X-ray diffraction, electron backscatter diffraction (EBSD), DC B-H hysteresis tester, and transmission electron microscopy (Titan-G2) indicate that all samples are predominantly face-centered-cubic (FCC) γ- (Ni, Fe) solid solutions and typical soft-magnetic hysteresis line features. However, the lattice parameter a of γ- (Ni, Fe) decreased and then increased with increasing Mo content. When the added Mo content is 0–1.25 wt%, the Mo particles inside the (NiFeMo) 100−xMo x alloy become nucleation sites, creating a diffusive metallurgical behavior with the Ni and Fe elements, and preventing the growth of columnar crystals, leading to the reduction of LAGBs density and the enhancement of the { 111 } texture orientation in the easy magnetization direction, increasing B s and the decrease of H c of the NiFeMo alloy. At the Mo content of 1.25 wt%, the soft magnetic properties were optimal, with B s and H c being 0.704 T and 17.31 A/m, respectively. Conversely, when the added Mo content was 1.5–2.0 wt%, the solubility of Mo elements in the γ- (Ni, Fe) solid solution was limited, which resulted in the occurrence of metallurgical defects within the organization such as unfused Mo particles, unfused areas, and porosity. Moreover, when the added Mo content increased to 2.0 wt%, the { 111 } lattice spacing in the easy magnetization direction increased by 0.2261 nm compared to the NiFeMo alloy, and the average lattice distortion Δ ε increased to 0.16%, causing a decrease in the soft magnetic performance of the (NiFeMo) 98Mo 2 alloy, with B s reducing to 0.6666 T and H c increasing to 23.44 A/m.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Additive manufacturing of soft magnetic materials and components
2. Microstructure-magnetic shielding development in additively manufactured Ni-Fe-Mo soft magnet alloy in the as fabricated and post-processed conditions10.1016/j.jallcom.2021.161112 ↗
3. Magnetic shielding promotion via the control of magnetic anisotropy and thermal Post processing in laser powder bed fusion processed NiFeMo-based soft magnet
4. Laser additive manufacturing of magnetic materials10.1007/s11837-017-2257-2 ↗
5. Magnetic properties of in-situ synthesized FeNi3 by selective laser melting Fe-80%Ni powders10.1016/j.jmmm.2013.02.014 ↗
6. Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology10.1016/j.jmmm.2011.08.030 ↗
7. Formation and properties of a self-assembled Cu-Fe-Ni-Cr-Si immiscible composite by laser induction hybrid cladding10.1016/j.jallcom.2018.01.387 ↗
8. Effect of Cr content on microstructure and oxidation resistance of laser-clad Cu-Ni-Fe-Mo-xCr alloy coating10.1016/j.surfcoat.2019.125316 ↗
9. Microstructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni10.1016/j.jallcom.2019.01.191 ↗
10. Accelerated and conventional development of magnetic high entropy alloys10.1016/j.mattod.2021.03.018 ↗
11. An investigation of the magnetic, mechanical, and kinetic characteristics of CuCrFeTiNi high entropy alloy by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2023.170347 ↗
12. Multi-phase nature of sintered vs. arc-melted CrxAlFeCoNi high entropy alloys—experimental and theoretical study10.1016/j.jallcom.2019.06.121 ↗
13. Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy10.1016/j.jallcom.2023.170225 ↗
14. Additive manufacturing of soft and hard magnetic materials used in electrical machines10.1016/j.mprp.2019.12.002 ↗
15. A defect-resistant Co-Ni superalloy for 3D printing10.1038/s41467-020-18775-0 ↗
16. Gradient microstructure, mechanical properties and phase composition of Ni-Cr-Fe alloy under additive manufacturing process10.1063/5.0034445 ↗
17. Emerging metallic systems for additive manufacturing: in-situ alloying and multi-metal processing in laser powder bed fusion10.1016/j.pmatsci.2021.100795 ↗
18. Past, present, and future of soft magnetic composites10.1063/1.5027045 ↗
19. Additively manufactured Ni-15Fe-5Mo Permalloy via selective laser melting and subsequent annealing for magnetic-shielding structures: process, micro-structural and soft-magnetic characteristics10.1016/j.jmmm.2019.165754 ↗
20. Microstructure and mechanical properties of AlSi10Mg alloy built by laser powder bed fusion/direct energy deposition hybrid laser additive manufacturing
21. A combinatorial approach for assessing the magnetic properties of high entropy alloys: role of Cr in AlCoxCr1−xFeNi10.1002/adem.201700048 ↗
22. Impact of Si addition on high-temperature oxidation behavior of NiAlHf alloys10.1016/j.jmst.2019.04.023 ↗
23. Minor-Cu doped soft magnetic Fe-based FeCoBCSiCu amorphous alloys with high saturation magnetization
24. Additive manufacturing of functionally graded Co–Fe and Ni–Fe magnetic materials10.1016/j.jallcom.2020.153817 ↗
25. Functionalization of biomedical Ti6Al4V via in situ alloying by Cu during laser powder bed fusion manufacturing10.3390/ma10101154 ↗
26. Humbeeck, microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
27. Microstructure and properties of FeAlCrNiMo x high-entropy alloys10.1007/s11665-016-2060-1 ↗
28. Laser additive processing of Ni-Fe-V and Ni-Fe-Mo permalloys: microstructure and magnetic properties10.1016/j.matlet.2017.01.059 ↗
29. Effects of metallurgical defects on magnetic properties of SLM NiFeMo permalloy10.1016/j.matchar.2023.112672 ↗
30. Influence of process parameters and alloy composition on structural, magnetic and electrical characteristics of Ni–Fe permalloys10.1016/j.jallcom.2006.11.048 ↗
31. Decisive role of magnetism in the interaction of chromium and nickel solute atoms with 1/2〈111〉-screw dislocation core in body-centered cubic iron10.1016/j.actamat.2016.08.074 ↗
32. Prediction of novel stable Fe-V-Si ternary phase10.1016/j.jallcom.2017.10.249 ↗
33. An extension of the Néel-Brown model for systems with multiple switching pathways10.1016/j.jmmm.2016.09.070 ↗
34. Influence of Mo on the microstructure and corrosion behavior of laser cladding FeCoCrNi high-entropy alloy coatings10.3390/e24040539 ↗
35. Effect of Mo addition on structure and magnetocaloric effect in γ-FeNi nanocrystals10.1007/s11664-013-2725-6 ↗
36. Microstructure evolution and magnetic shielding effect of permalloy deposition on molybdenum substrate by electron beam freeform fabrication
37. Self-diffusion in iron-based Fe–Mo alloys10.1016/j.actamat.2006.02.020 ↗
38. Controlling the grain orientation during laser powder bed fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet10.1016/j.actamat.2018.07.064 ↗
39. Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion10.1080/17452759.2021.1928520 ↗
40. Additive manufactured high entropy alloys: a review of the microstructure and properties10.1016/j.matdes.2022.110875 ↗
41. Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy10.1016/j.matchar.2022.112365 ↗
42. 3D printing of ductile equiatomic Fe-Co alloy for soft magnetic applications
43. Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys10.1016/j.actamat.2023.118699 ↗
44. Dislocation cells in additively manufactured metallic alloys characterized by electron backscatter diffraction pattern sharpness10.1016/j.matchar.2023.112673 ↗
45. Impact of magnetism on screw dislocations in body-centered cubic chromium10.1016/j.actamat.2020.09.041 ↗
46. Novel high entropy alloys of FexCo1−xNiMnGa with excellent soft magnetic properties10.1016/j.intermet.2018.05.014 ↗
47. Theoretical limit for the initial magnetic susceptibility in collective systems of noninteracting macrospins
48. Influence of stress-induced anisotropy on domain structure and magnetic properties of Fe-based nanocrystalline alloy under continuous tension annealing10.1016/j.jnoncrysol.2022.122035 ↗
49. A continuum theory for stripe-shaped magnetic domains in thin films10.1016/j.jmmm.2023.171375 ↗
50. A mechanically strong and ductile soft magnet with extremely low coercivity10.1038/s41586-022-04935-3 ↗