Exceptional abrasive wear resistance of immiscible Mg-Fe80Cr20 composites with 3D interconnected structure developed by liquid metal dealloying
Source abstract
Abstract
Three-dimensional (3D) interconnected heterogeneous composites prepared through liquid metal dealloying (LMD) have been studied owing to their unique structural features and interesting deformation behavior beyond the strength-ductility trade-off. In this work, we systematically investigated the abrasive wear mechanism of 3D interconnected composites comprising immiscible Mg and Fe 80Cr 20 as a function of the fraction of hard Fe 80Cr 20 phase. (Fe 80Cr 20) xNi 100−x precursor alloys were used in the LMD process, and the miscible Ni element dissolved in the Mg melt. Subsequently, the self-organization of the solid Fe 80Cr 20 led to a 3D interconnected composite containing penetrated Mg structures. The volume fraction of Mg phase and microstructural features of the composites were highly influenced by the initial Ni concentration. Although the composites had a brittle interface because of the immiscibility of Mg and Fe 80Cr 20, the 3D interconnected structures exhibited exceptional abrasive wear resistance beyond expectations. Highly deformed structures were observed on worn surfaces, and wear mechanisms differed from those of bulk Mg and Fe 80Cr 20 materials. During the wear test, the area fraction of Fe 80Cr 20 phase on the worn surface increased significantly, and the presence of nanograined Fe 80Cr 20 layers with a high dislocation density effectively protected the underlying soft Mg phase. In particular, the Mg-based tribofilm acted as a lubricant in the 3D interconnected structure. These findings related to the improvement of wear resistance through structural design could serve as guidelines for various applications of heterogeneous 3D architecture materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoporous metals and alloys · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Recent advancements of plant-based natural fiber–reinforced composites and their applications10.1016/j.compositesb.2020.108254 ↗
2. Structural design strategies of polymer matrix composites for electromagnetic interference shielding: a review10.1007/s40820-021-00707-2 ↗
3. Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties10.1016/j.compositesb.2021.108605 ↗
4. Influence of Hot Extrusion on the Microstructure, Tensile and Wear Properties of Mg–5Sb–xSiC Hybrid Composites10.1007/s12540-020-00936-x ↗
5. Synergistic effect of in-situ Al-7075/Al3Ti metal matrix composites prepared via stir-assisted ultrasonic melt processing under dynamic nucleation10.1007/s12540-021-01143-y ↗
6. Effect of silicon carbide volume fraction on the work hardening behaviour of thermomechanically processed aluminium-based metal–matrix composites10.1016/S1359-8368(98)00041-9 ↗
7. Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion10.1016/j.compositesb.2023.110514 ↗
8. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites10.1016/j.jmatprotec.2004.07.068 ↗
9. Different tribological behaviors of SiCp/AZ91 composites induced by tailoring the distribution of SiC particles10.1007/s12540-020-00780-z ↗
10. Abrasive wear of aluminum-matrix composites10.1007/BF03338093 ↗
11. Effect of microstructure (particulate size and volume fraction) and counterface material on the sliding wear resistance of particulate-reinforced aluminum matrix composites10.1007/BF02652272 ↗
12. Effect of titanium binder addition on the interface structure and three-body abrasive wear behavior of ZTA ceramic particles-reinforced high chromium cast iron10.1016/j.ceramint.2020.02.169 ↗
13. Dealloying by metallic melt10.1016/j.matlet.2011.01.054 ↗
14. Topology-generating interfacial pattern formation during liquid metal dealloying10.1038/ncomms9887 ↗
15. Kinetics and morphological evolution of liquid metal dealloying10.1016/j.actamat.2016.05.032 ↗
16. Imaging of 3D morphological evolution of nanoporous silicon anode in lithium ion battery by X-ray nano-tomography10.1016/j.nanoen.2018.08.009 ↗
17. Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production10.1038/s41467-022-32768-1 ↗
18. Bulk-nanoporous-silicon negative electrode with extremely high cyclability for lithium-ion batteries prepared using a top-down process10.1021/nl501500g ↗
19. Beating thermal coarsening in nanoporous materials via high-entropy design10.1002/adma.201906160 ↗
20. 3D interconnected nanoporous FeCo soft magnetic materials synthesized by liquid metal dealloying10.1016/j.jallcom.2022.164688 ↗
21. Novel hierarchical nanoporous graphene nanoplatelets with excellent rate capabilities produced via self-templating liquid metal dealloying
22. Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors10.1016/j.actamat.2014.11.002 ↗
23. Anomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloying10.1016/j.scriptamat.2019.01.017 ↗
24. Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying10.1016/j.compositesb.2021.109266 ↗
25. Dealloying-based interpenetrating-phase nanocomposites matching the elastic behavior of human bone10.1038/s41598-017-00048-4 ↗
26. Open porous dealloying-based biomaterials as a novel biomaterial platform10.1016/j.msec.2018.03.008 ↗
27. Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters10.1016/j.scriptamat.2018.05.029 ↗
28. Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying10.1016/j.scriptamat.2020.113660 ↗
29. Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying10.1016/j.compositesb.2021.109044 ↗
30. Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying10.1016/j.jmrt.2021.10.080 ↗
31. Powder metallurgical Ti-Mg metal-metal composites facilitate osteoconduction and osseointegration for orthopedic application
32. A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V–Mg composites10.1016/j.jmbbm.2016.06.026 ↗
33. On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures10.1038/s41467-022-30873-9 ↗
34. Transformation mechanisms and governing orientation relationships through selective dissolution of Ni via liquid metal dealloying from (FeCo)xNi100−x precursors10.1016/j.matdes.2019.108271 ↗
35. Unusual two-step dealloying mechanism of nanoporous TiVNbMoTa high-entropy alloy during liquid metal dealloying10.1016/j.jmrt.2021.08.100 ↗
36. A review of two-body abrasive wear10.1016/0043-1648(74)90080-5 ↗
37. A wear model based on cumulative cyclic plastic straining10.1016/j.wear.2009.01.010 ↗
38. Overcoming brittleness of high volume fraction Al/SiCp composites by controlling interface characteristics10.1016/j.matdes.2022.111038 ↗
39. An experimental investigation into multi-scale damage progression in laminated composites in bending10.1016/j.compstruct.2016.03.054 ↗
40. Effect of interface on mechanical properties and stamping formability of Ti/Al multilayered composites10.1007/s12540-022-01299-1 ↗
41. Surface modification of SiC reinforcements & its effects on mechanical properties of aluminium based MMC
42. Effect of silica coatings on interfacial mechanical properties in aluminium—SiC composites characterized by nanoindentation10.1016/j.scriptamat.2005.01.036 ↗
43. Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting10.1016/j.actamat.2020.09.015 ↗
44. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
45. Resistance to abrasive wear of structurally heterogeneous materials
46. Abrasive wear of two-phase metallic materials with a coarse microstructure
47. A physically-based abrasive wear model for composite materials10.1016/S0043-1648(01)00896-1 ↗
48. Constructing 3D interconnected CNTs network in PA6 composites with well-dispersed UHMWPE for excellent tribological and heat dissipation properties10.1016/j.compositesb.2022.110252 ↗
49. Preparation and properties of 3D interconnected CNTs/Cu composites10.1515/ntrev-2020-0013 ↗
50. Synthesis and 3D interconnected nanostructured h-BN-based biocomposites by low-temperature plasma sintering: bone regeneration applications10.1021/acsomega.8b00707 ↗
51. Three-dimensional graphene nanosheet films towards high performance solid lubricants10.1016/j.apsusc.2018.10.125 ↗
52. Facile fabrication of large 3D graphene filler modified epoxy composites with improved thermal conduction and tribological performance10.1016/j.carbon.2018.07.059 ↗
53. Plastic deformation below worn surfaces10.1007/BF02659813 ↗
54. A study of the abrasive wear of pure metals using a pin-on-drum apparatus10.1016/0043-1648(90)90033-7 ↗
55. Enhanced wear resistance of the ultrastrong ultrasonic shot-peened M50 bearing steel with gradient nanograins10.3390/met12030424 ↗
56. Enhanced wear resistance of 316 L stainless steel with a nanostructured surface layer prepared by ultrasonic surface rolling10.3390/coatings9040276 ↗