Unusual role of ZnO nanoparticles in enhancing the thermoelectric performance of GeTe
Source abstract
Abstract
ZnO nanoparticles were incorporated into the GeTe samples. Unexpectedly, the ZnO nanoparticles reacted with the GeTe phase to produce ZnTe and Ge impurities. Ge precipitates promoted self compensation in GeTe, which in turn reduced the Ge vacancies and decreased the carrier concentration. The resulting increase in the Seebeck coefficient led to a higher power factor, despite an increase in the electrical resistivity. Due to the optimized power factor and a lower carrier thermal conductivity, the average zT increased from 0.64 for the pure GeTe to 0.79 for GeTe + 0.5 wt .% ZnO. Additionally, irreversibility of the reaction between GeTe and ZnO during the high-temperature thermoelectric measurements emphasizes importance of the proper sequence for the property measurements; the Hall data should be recorded once the thermopower and electrical conductivity were measured to high temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Anomalous band gap evolution from band inversion in Pb1−xSnxTe nanocrystals10.1021/nl8037757 ↗
2. High thermoelectric performance by chemical potential tuning and lattice anharmonicity in GeTe 1−x I x compounds10.1039/D0QI01281E ↗
3. Mg alloying in SnTe facilitates valence band convergence and optimizes thermoelectric properties10.1021/cm504112m ↗
4. Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys10.1126/sciadv.abf2738 ↗
5. Low-symmetry rhombohedral GeTe thermoelectrics10.1016/j.joule.2018.02.016 ↗
6. Synergistic optimization of thermoelectric performance of Sb doped GeTe with a strained domain and domain boundaries10.1039/D0TA00628A ↗
7. Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence10.1002/aenm.201801837 ↗
8. Grain boundary dominated charge transport in Mg3Sb2-based compounds10.1039/C7EE03326E ↗
9. Glass-like phonon scattering from a spontaneous nanostructure in AgSbTe210.1038/nnano.2013.95 ↗
10. Thermoelectric performance enhancement in BiSbTe alloy by microstructure modulation via cyclic spark plasma sintering with liquid phase10.1002/adfm.202009681 ↗
11. Significantly optimized thermoelectric properties in high-symmetry cubic Cu7PSe6 compounds via entropy engineering10.1039/C8TA00631H ↗
12. Thermoelectric high-entropy alloys with low lattice thermal conductivity10.1039/C5RA28088E ↗
13. Thermoelectric performance of PbSnTeSe high-entropy alloys10.1080/21663831.2016.1244116 ↗
14. Entropy engineering of SnTe: multi‐principal‐element alloying leading to ultralow lattice thermal conductivity and state‐of‐the‐art thermoelectric performance10.1002/aenm.201802116 ↗
15. High-entropy-stabilized chalcogenides with high thermoelectric performance10.1126/science.abe1292 ↗
16. Realizing high thermoelectric performance in GeTe through decreasing the phase transition temperature via entropy engineering10.1039/C9TA10963C ↗
17. High-entropy alloys as high-temperature thermoelectric materials10.1063/1.4935489 ↗
18. Suppression of the lattice thermal conductivity in NbFeSb-based half-heusler thermoelectric materials through high entropy effects10.1016/j.scriptamat.2018.08.008 ↗
19. Giant anharmonic phonon scattering in PbTe10.1038/nmat3035 ↗
20. High quality factor enabled by multiscale phonon scattering for enhancing thermoelectrics in low-solubility n-type PbTe–Cu2Te alloys10.1021/acsami.0c16431 ↗
21. High thermoelectric figure of merit in heavy hole dominated PbTe10.1039/c0ee00456a ↗
22. Self-tuning the carrier concentration of PbTe/Ag2Te composites with excess Ag for high thermoelectric performance10.1002/aenm.201000072 ↗
23. Broad temperature plateau for thermoelectric figure of Merit ZT>2 in phase-separated PbTe0.7S0.310.1038/ncomms5515 ↗
24. Exploration of Zn resonance levels and thermoelectric properties in i-doped PbTe with ZnTe nanostructures10.1021/am405410e ↗
25. Hierarchical structures lead to high thermoelectric performance in Cum+nPb100SbmTe 100Se2m(CLAST)10.1039/D0EE03459B ↗
26. Polycrystalline SnSe–Sn1–vS solid solutions: vacancy engineering and nanostructuring leading to high thermoelectric performance10.1016/j.nanoen.2019.104393 ↗
27. High-performance SnSe thermoelectric materials: progress and future challenge10.1016/j.pmatsci.2018.04.005 ↗
28. Achieving ZT=2.2 with Bi-doped n-type SnSe single crystals10.1038/ncomms13713 ↗
29. Realization of high thermoelectric performance in polycrystalline tin selenide through schottky vacancies and endotaxial nanostructuring10.1021/acs.chemmater.0c03657 ↗
30. High-temperature oxidation behavior of thermoelectric SnSe10.1016/j.jallcom.2016.01.258 ↗
31. Enhanced mid-temperature thermoelectric performance of textured SnSe polycrystals made of solvothermally synthesized powders10.1039/C5TC04202J ↗
32. Ultrahigh average ZT realized in p-type snse crystalline thermoelectrics through producing extrinsic vacancies10.1021/jacs.0c01726 ↗
33. Coupling of spin-orbit interaction with phonon anharmonicity leads to significant impact on thermoelectricity in SnSe10.1016/j.nanoen.2019.04.010 ↗
34. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗
35. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
36. Ultralow thermal conductivity, enhanced mechanical stability, and high thermoelectric performance in (GeTe) 1–2 x (SnSe) x (SnS) x10.1021/jacs.0c11015 ↗
37. Enhanced thermoelectric performance of GeTe through in Situ microdomain and Ge-vacancy control10.1039/C9TA03503F ↗
38. Resonance levels in GeTe thermoelectrics: zinc as a new multifaceted dopant10.1039/D0NJ04273K ↗
39. Dilute Cu2Te-alloying enables extraordinary performance of r-GeTe thermoelectrics
40. Realizing ZT values of 2.0 in cubic GeTe10.1002/cnma.202100033 ↗
41. Vacancy-based defect regulation for high thermoelectric performance in Ge 9Sb2Te12–x compounds10.1021/acsami.0c02155 ↗
42. Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance10.1039/C9EE00317G ↗
43. Lone-pair engineering: achieving ultralow lattice thermal conductivity and enhanced thermoelectric performance in Al-doped GeTe-based alloys
44. Achieving high thermoelectric performance by NaSbTe2 alloying in GeTe for simultaneous suppression of Ge vacancies and band tailoring10.1002/aenm.202103385 ↗
45. High thermoelectric figure of merit values of germanium antimony tellurides with kinetically stable cobalt germanide precipitates10.1021/jacs.5b07856 ↗
46. Strong Phonon–Phonon interactions securing extraordinary thermoelectric Ge 1– x Sb x Te with Zn-alloying-induced band alignment10.1021/jacs.8b12624 ↗
47. Crystal symmetry induced structure and bonding manipulation boosting thermoelectric performance of GeTe10.1016/j.nanoen.2020.104740 ↗
48. Rhombohedral to cubic Conversion of GeTe via MnTe alloying leads to ultralow thermal conductivity, electronic band convergence, and high thermoelectric performance10.1021/jacs.7b13611 ↗
49. Electronic origin of the high thermoelectric performance of GeTe among the P-type group iv monotellurides10.1038/am.2017.8 ↗
50. Origin of the High performance in GeTe-based thermoelectric materials upon Bi 2 Te 3 Doping10.1021/ja504896a ↗
51. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials
52. Q uantum ESPRESSO toward the Exascale10.1063/5.0005082 ↗
53. Pseudopotentials periodic table: from H to Pu10.1016/j.commatsci.2014.07.043 ↗
54. Precision and efficiency in solid-state pseudopotential calculations10.1038/s41524-018-0127-2 ↗
55. Accurate band gaps of semiconductors and insulators with a semilocal exchange-correlation potential10.1103/PhysRevLett.102.226401 ↗
56. Simultaneous optimization of carrier concentration and alloy scattering for ultrahigh performance GeTe thermoelectrics10.1002/advs.201700341 ↗
57. Vacancy manipulation for thermoelectric enhancements in GeTe alloys10.1021/jacs.8b09375 ↗
58. Hunter, B.A. Rietica - a Visual Rietveld Program; Australia, 2000; p 24.
59. The crystal structure of quartz-like GEO210.1107/S0365110X64002262 ↗
60. Semiconductors, 2020, Vol. 54, No. 12, pp. 1555–1560. © Pleiades Publishing, Ltd., 2020.10.1134/S1063782620120027 ↗
61. BoltzTraP. a code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
62. Thermoelectric GeTe with diverse degrees of freedom having secured superhigh performance10.1002/adma.201807071 ↗
63. Rashba effect maximizes thermoelectric performance of GeTe derivatives10.1016/j.joule.2020.07.021 ↗
64. Realizing high thermoelectric performance in GeTe through optimizing Ge vacancies and manipulating Ge precipitates10.1021/acsaem.9b01585 ↗
65. Achieving high thermoelectric quality factor toward high figure of merit in GeTe
66. Realization of High Thermoelectric Figure of Merit in GeTe by Complementary Co-Doping of Bi and10.1016/j.joule.2019.08.017 ↗