journal article·2023-06

An investigation of hollow NiCrAl metal fiber porous material for high-temperature sealing

Xiaolin Wei, Yongfu Zhang, Ben Ma, Dongqin Li, Weiwei Chen, Huanwu Cheng, Lu Wang, Yongqiang Tao, Lin Lu, Maoyuan Li, Haifeng Fu

Publisher page

Abstract

Porous metal fiber materials are a type of low-density material promising for functional and structural applications. Unlike traditional metal fiber porous materials, this study developed a novel hollow metal fiber porous material based on carbon fibers. Nickel was electroplated on the surface of the chopped carbon fiber, then the carbon core was removed by wet hydrogen sintering, and finally, Cr and Al were infiltrated by gas phase alloying to obtain the finished product. SEM showed that its internal structure was connected by metal fibers interlaced and overlapped to form a three-dimensional network porous structure. TEM and XRD proved that Ni (fcc) is the main phase of the material, and the addition of Cr and Al elements causes Ni lattice distortion. The compressive strength of the material at 900 °C is 4.44 MPa. In addition, the material`s strength decreases with the heat treatment temperature increasing. The thermal conductivity of the NiCrAl porous material increases with the temperature, which is 0.143 W/(m·K) at room temperature and 0.416 W/(m·K) at 900 ℃. TG analyses showed that the NiCrAl porous material possessed excellent high-temperature and oxidation-resistance properties. Quartz lamp heating tests showed that the material had good thermal insulation, as the temperature dropped by about 230 °C after passing through the material. The average permeability of the material at room temperature is 5.46 e-6D. This metal fiber porous material has both the inherent properties of metal and the functional properties of porous materials such as lightweight, high-temperature resistance, heat insulation, etc. It is a promising high-temperature sealing material.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Aerogels and thermal insulation · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. P. Dunlap, B. Steinetz, A Comparison of Candidate Seal Designs for Future Docking Systems, In: Proceedings of the Aiaa/asme/sae/asee Joint Propulsion Conference & Exhibit, 2013.10.2514/6.2012-4075 ↗
2. P. Dunlap, B. Steinetz, J. Demange, Further investigations of hypersonic engine seals, In: Proceedings of the 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004, p. 3887.10.2514/6.2004-3887 ↗
3. SiC – Si3N4 – SiO2 high-temperature coatings for metal fiber sealing materials10.1007/s10717-011-9351-7 ↗
4. Compressive property and energy absorption of porous sintered fiber metals10.2320/matertrans.MEP2008322 ↗
5. Progress of application researches of porous fiber metals10.3390/ma4040816 ↗
6. Porous materials additively manufactured at low energy: single-layer manufacturing and characterization10.1016/j.matdes.2020.108654 ↗
7. Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point probe method10.1016/j.matdes.2011.12.046 ↗
8. X. Gong, T. Anderson, K. Chou, Review on powder-based electron beam additive manufacturing technology, In: Proceedings of the ASME/ISCIE 2012 International Symposium on Flexible Automation, 2014.10.1115/ISFA2012-7256 ↗
9. New high temperature-resistant NiCrAl and NiCrAl + Hf felt materials10.1016/0921-5093(89)90796-X ↗
10. Promoting exclusive α-Al2O3 growth upon high-temperature oxidation of NiCrAl alloys: experiment versus model predictions10.1016/j.actamat.2004.12.014 ↗
11. Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900 degrees C10.1016/j.matchemphys.2008.05.006 ↗
12. High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys10.1179/174329409X409486 ↗
13. High temperature behavior of a diffusion barrier coating evolved from ZrO2 precursor layer10.1016/j.surfcoat.2018.10.022 ↗
14. Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900 °C,10.1016/j.matchemphys.2008.05.006 ↗
15. High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys10.1179/174329409X409486 ↗
16. Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating10.1016/j.surfcoat.2011.04.065 ↗
17. Hollow-structured materials for thermal insulation10.1002/adma.201801001 ↗
18. Thermal conductivity analysis of high porosity structures with open and closed pores10.1016/j.ijheatmasstransfer.2021.122089 ↗
19. Reciprocating shaft seals for high-temperature and high-pressure applications: a review
20. Microstructural characteristics and mechanical properties of HVOF sprayed NiCrAl coating on superalloys10.1016/j.jallcom.2008.01.025 ↗
21. Structural variations of Cr-doped (YREE) AlO3 perovskites
22. Y. Zhang, X. Tai, J. Zhou, T. Zhai, L. Xu, C. Diao, X. Xie, C. Hou, X. Sun, X. Zhang, Enhanced high-temperature thermal conductivity of the reduced graphene oxide@SiO2 composites synthesised by liquid phase deposition - ScienceDirect, Ceramics International (2021).10.1016/j.ceramint.2021.12.058 ↗
23. Conductive aramid fiber with Ni-Cu composite coating prepared using the metalation swelling method10.1007/s12221-013-0453-4 ↗
24. The preparation, characterization, and influence of multiple electroless nickel-phosphorus (Ni-P) hollow composite coatings on micro-nano cellulose fibers10.1016/j.surfcoat.2016.01.061 ↗
25. A new approach to manufacture oxidation-resistant NiCrAl overlay coatings by electrodeposition10.1016/j.corsci.2019.01.039 ↗
26. Development of the theories of strength in the mechanics of materials10.1007/s11223-010-9246-9 ↗
27. Enhanced formation of alpha-Al2O3 at low temperature on Cr/Al coating by controlling oxygen partial pressure10.1016/j.apsusc.2020.146053 ↗
28. Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity10.1007/s10853-010-4331-9 ↗
29. Thermal-conductivity measurements and predictions for Ni-Cr solid solution alloys10.1007/s10765-010-0813-x ↗
30. Thermal conductivity of highly porous mullite materials10.1016/j.ijheatmasstransfer.2013.08.008 ↗