Preparation and electrochemical performance of LiNi1/3Co1/3Mn1/3O2/Li2FeSiO4/C composites for lithium-ion batteries
Source abstract
Abstract
In this study, LiNi 1/3Co 1/3Mn 1/3O 2/Li 2FeSiO 4 /C composite materials were successfully synthesized using the sol-gel method by incorporating carbon derived from the carbonization of citric acid to improve the inherently poor electronic conduction. The material space group was R-3 m, and it did not include any other heterotic peaks. Energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) confirmed the successful formation of a composite material comprising C, Li 2FeSiO 4 (LFS), and LiNi 1/3Co 1/3Mn 1/3O 2 (LNCMO). The initial specific discharge capacity of the LNCMO− 3 composite was 156.4 mAh/g. The capacity retention of LNCMO after 100 cycles was 43.48%, whereas that of LNCMO− 3 was 44.88%. The superior conductivity and chemical stability of the LFS/C layer enhanced the electrochemical performance by improving electron and ion transfer and preventing the attack of electrolytes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A universal, facile and ultrafast monomer-tuned strategy to construct multi-dimensional hierarchical polymer structures and applications for lithium-ion batteries10.1016/j.cej.2021.131135 ↗
2. Electrochemical properties of pre-lithiated nanorod-like LixV6O13 lithium ion battery cathode materials prepared by solvothermal method
3. Enhanced eletrochemical performances of LiCoO2 at high cut-off voltage by introducing LiF additive10.1016/j.ssi.2021.115654 ↗
4. LiMn2O4 prepared from waste lithium ion batteries through sol-gel process10.1016/j.jallcom.2021.159222 ↗
5. Enhanced electrochemical performance and storage mechanism of LiFePO4 doped by Co, Mn and S elements for lithium-ion batteries10.1016/j.electacta.2021.138592 ↗
6. Enhanced structural stability and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials by Ga doping10.3390/ma14081816 ↗
7. The electrochemical performance of Li2CuO2–CuO composite-treated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries10.1016/j.matchemphys.2021.124808 ↗
8. Enhancing Rate Capacity and Cycle Stability of LiNi1/3Co1/3Mn1/3O2 Cathode Material by Laminar V2O5 Coating for Lithium‐Ion Batteries10.1002/slct.202101306 ↗
9. Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries10.1016/j.cej.2021.129964 ↗
10. Effects of transition metal doping on electrochemical properties of single-crystalline LiNi0.7Co0.1Mn0.2O2 cathode materials for lithium-ion batteries10.1016/j.jallcom.2021.159619 ↗
11. Li2TiO3 and Li2ZrO3 co-modification LiNi0.8Co0.1Mn0.1O2 cathode material with improved high-voltage cycling performance for lithium-ion batteries10.1016/j.ssi.2020.115292 ↗
12. Effectively enhance high voltage stability of LiNi1/3Co1/3Mn1/3O2 cathode material with excellent energy density via La2O3 surface modified10.1007/s11581-018-2621-4 ↗
13. Optimal microwave-assisted hydrothermal synthesis of nanosized xLi2MnO3·(1−x)LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion battery10.1016/j.jpowsour.2013.08.097 ↗
14. Lithium-rich manganese-based cathode materials with highly stable lattice and surface enabled by perovskite-type phase-compatible layer10.1016/j.nanoen.2021.106288 ↗
15. LiVOPO4‐modified lithium‐rich layered composite cathodes for high‐performance lithium‐ion batteries10.1002/celc.202001374 ↗
16. Hierarchical LiMnPO4·Li3V2(PO4)3/C/rGO nanocomposites as superior-rate and long-life cathodes for lithium ion batteries10.1016/j.jallcom.2018.07.354 ↗
17. Enhancing electrochemical performance of LiMnPO4 cathode via LiNi1/3Co1/3Mn1/3O210.1007/s11581-021-03969-3 ↗
18. A study on electrochemical characteristics of LiCoO2/LiNi1/3Mn1/3Co1/3O2 mixed cathode for Li secondary battery10.1016/j.electacta.2006.02.045 ↗
19. Fabrication of an LiMn2O4@LiMnPO4 composite cathode for improved cycling performance at high temperatures10.1080/21870764.2020.1743413 ↗
20. Enhanced electrochemical performances of Na-doped cathode material LiNi1/3Co1/3Mn1/3O2 for lithium-ion batteries10.1007/s10853-017-1449-z ↗
21. Self-assembled LiNi1/3Co1/3Mn1/3O2 nanosheet cathode with high electrochemical performance10.1021/acsami.7b10264 ↗
22. The role of yttrium content in improving electrochemical performance of layered lithium-rich cathode materials for Li-ion batteries10.1039/c3ta11665d ↗
23. A novel and practical hydrothermal method for synthesizing LiNi1/3Co1/3Mn1/3O2 cathode material10.1016/j.ceramint.2020.05.073 ↗
24. Facile synthesis of fluorine doped single crystal Ni-rich cathode material for lithium-ion batteries10.1016/j.ssi.2019.115065 ↗
25. LiNi1/3Co1/3Mn1/3O2/polypyrrole composites as cathode materials for high‐performance lithium‐ion batteries10.1002/er.4916 ↗
26. Electrochemical characterization of AlPO4 coated LiNi1/3Co1/3Mn1/3O2 cathode materials for high temperature lithium battery application10.1007/s12598-014-0247-x ↗
27. Effects of Cr doping on the electrochemical properties of Li2FeSiO4 cathode material for lithium-ion batteries10.1016/j.electacta.2010.07.059 ↗
28. Improvement of electrochemical properties of LiNi1/3Co1/3Mn1/3O2 by coating with V2O5 layer10.1016/j.jallcom.2012.10.090 ↗
29. H3PO4 treatment to enhance the electrochemical properties of Li(Ni1/3Mn1/3Co1/3)O2 and Li(Ni0.5Mn0.3Co0.2)O2 cathodes10.1016/j.electacta.2019.01.153 ↗
30. Investigation of facial B2O3 surface modification effect on the cycling stability and high-rate capacity of LiNi1/3Co1/3Mn1/3O2 cathode10.1016/j.jallcom.2020.155150 ↗
31. 1D Nb-doped LiNi1/3Co1/3Mn1/3O2 nanostructures as excellent cathodes for Li-ion battery10.1016/j.electacta.2018.11.172 ↗
32. The effect of calcination conditions on the crystal growth and battery performance of nanocrystalline Li(Ni1/3Co1/3Mn1/3)O2 as a cathode material for Li-ion batteries10.1039/C8NJ05007D ↗
33. Enhancing rate capacity and cycle stability of LiNi1/3Co1/3Mn1/3O2 cathode material by laminar V2O5 coating for lithium-ion batteries10.1002/slct.202101306 ↗
34. Eggshell-Membrane-Derived Carbon Coated on Li2FeSiO4 cathode material for Li-Ion batteries10.3390/en13040786 ↗