journal article·2022-11

An amorphous TiOx-coated black phosphorus composite with enhanced cycling performance as an anode for lithium-ion batteries

Junqi Wang, Wei Liu, Chunqing Wang

Publisher page

Abstract

Black phosphorus (BP) has attracted much attention as a promising anode material for lithium-ion batteries. However, poor environmental stability, large volume expansion, and irreversible solid-electrolyte interphase (SEI) have limited its practical applications. Herein, an electrode-coating method was adopted to spin-coat the amorphous TiO x precursor onto the surface of the ball-milled BP–C electrode. Then heat treatment was performed to obtain an evenly coated BP–C@TiO x structure. The TiO x protective layer contributed a certain capacity and the generated Li yTiO x layer could mitigate the volume expansion, resulting in enhancing the stability of the electrode structure and slowing down the capacity decay. After 50 cycles, the BP–C@TiO x electrode possessed an initial discharge capacity of 2396 mAh g −1 and a reversible capacity of 702 mAh g −1 at 0.1 A g −1. In addition, the amorphous structure of TiO x promoted ion diffusion and ensured the rapid transport of Li +, thus the coated electrode could maintain the high-rate capacity of 278 mAh g −1 at 2 A g −1 and good long-term cycling performance with the capacity retention rate of 79.3 % after 1000 cycles at 2 A g −1. The proposed strategy provides a new inspiration for high-performance alloyed anode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage10.1126/science.aav5842 ↗
2. Challenges in ecofriendly battery recycling and closed material cycles: a perspective on future lithium battery generations10.3390/met11020291 ↗
3. Identifying soft breakdown in all-solid-state lithium battery10.1016/j.joule.2022.05.020 ↗
4. A comprehensive review study on pure titanium niobium oxide as the anode material for Li-ion batteries10.1016/j.jallcom.2022.165117 ↗
5. Status and challenges facing representative anode materials for rechargeable lithium batteries10.1016/j.jechem.2021.08.001 ↗
6. Free-standing ultrathin lithium metal–graphene oxide host foils with controllable thickness for lithium batteries10.1038/s41560-021-00833-6 ↗
7. Strategies to anode protection in lithium metal battery: a review10.1002/inf2.12189 ↗
8. Hard carbon anodes: fundamental understanding and commercial perspectives for na-ion batteries beyond Li-ion and K-ion counterparts10.1002/aenm.202002704 ↗
9. Hemp straw carbon and Ni/NiO embedded structure composites as anode materials for lithium ion batteries10.1016/j.jallcom.2021.161776 ↗
10. A covalent P–C bond stabilizes red phosphorus in an engineered carbon host for high-performance lithium-ion battery anodes10.1021/acsnano.0c10370 ↗
11. New insights into the high-performance black phosphorus anode for lithium-ion batteries10.1002/adma.202101259 ↗
12. Battery-type phosphorus doped FeS2 grown on graphene as anode for hybrid supercapacitor with enhanced specific capacity10.1016/j.jallcom.2020.157114 ↗
13. Enhanced electron transfer and ion storage in phosphorus/nitrogen co-doped 3D interconnected carbon nanocage toward potassium-ion battery10.1016/j.jcis.2021.12.121 ↗
14. Fabrication and applications of 2D black phosphorus in catalyst, sensing and electrochemical energy storage10.1016/j.jallcom.2020.156580 ↗
15. Phosphorus–graphite composite anode for Li-/Na-/K-ion batteries10.1002/anie.201913129 ↗
16. Robust solid electrolyte interphases in localized high concentration electrolytes boosting black phosphorus anode for potassium-ion batteries10.1021/acsnano.1c07414 ↗
17. Selenium-doped amorphous black phosphorus@TiO2/C heterostructures for high-performance Li/Na/K ion batteries10.1021/acs.inorgchem.1c03420 ↗
18. Recent advances in black-phosphorus-based materials for electrochemical energy storage10.1016/j.mattod.2020.09.005 ↗
19. Anisotropic black phosphorene nanotube anodes afford ultrafast kinetic rate or extra capacities for Li-ion batteries10.1016/j.cclet.2021.11.030 ↗
20. Improving harsh environmental stability of few-layer black phosphorus by local charge transfer
21. Core–shell structure of a polypyrrole-coated phosphorus/carbon nanotube anode for high-performance lithium-ion batteries10.1021/acsaem.1c00459 ↗
22. Sandwiched thin-film anode of chemically bonded black phosphorus/graphene hybrid for lithium-ion battery10.1002/smll.201700758 ↗
23. Tannic acid-polypyrrole multifunctional coating layer enhancing the interface effect and efficient Li-ion transport of a phosphorus anode10.1039/D1NR07987E ↗
24. Design of black phosphorous derivatives with excellent stability and ion-kinetics for alkali metal-ion battery10.1016/j.ensm.2020.11.025 ↗
25. Formation of stable phosphorus-carbon bond for enhanced performance in black phosphorus nanoparticle-graphite composite battery anodes10.1021/nl501617j ↗
26. Thermodynamics and kinetics of 2D g-GeC monolayer as an anode materials for Li/Na-ion batteries10.1016/j.jpowsour.2020.229318 ↗
27. Pristine and defective 2D Borophene/Graphene Heterostructure as the Potential Anode of Lithium-Ion Batteries10.1002/admi.202102088 ↗
28. Electrochemistry of P–C Bonds in Phosphorus–Carbon Based Anode Materials10.1021/acsami.2c01494 ↗
29. Armoring black phosphorus anode with stable metal–organic-framework layer for hybrid K-ion capacitors10.1007/s40820-020-00570-7 ↗
30. Black P@MOx (M = Mg, Al, or Ti) composites as superior Li-ion battery anodes10.1016/j.cej.2021.130366 ↗
31. In-situ introducing TiP2 nanocrystals in black phosphorus anode to promote high rate-capacity synergy10.1016/j.jpowsour.2021.229979 ↗
32. Interfacial electron modulation of MoS2/black phosphorus heterostructure toward high-rate and high-energy density half/full sodium-ion batteries10.1039/D1QM00786F ↗
33. Tuning working potential of silicon-phosphorus anode via microstructure control for high-energy lithium-ion batteries
34. Toward superior lithium/sodium storage performance: design and construction of novel TiO2-based anode materials10.1007/s12598-021-01742-z ↗
35. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: the latest advancements and future perspectives
36. “Quasi-Zero-Strain” TiO2–x as an ultra-long-life anode for Li-ion batteries10.1021/acsaem.1c03755 ↗
37. Free-standing crystalline@amorphous core–shell nanoarrays for efficient energy storage10.1002/smll.202000040 ↗
38. 2D amorphous-MoO3−x@Ti3C2-MXene non-van der Waals heterostructures as anode materials for lithium-ion batteries10.1016/j.nanoen.2021.106139 ↗
39. Defect-assisted selective surface phosphorus doping to enhance rate capability of titanium dioxide for sodium ion batteries10.1021/acsnano.9b03766 ↗
40. Superior rate and long-lived performance of few-layered black phosphorus-based hybrid anode for lithium-ion batteries
41. Enhanced photocatalytic degradation of gaseous toluene and liquidus tetracycline by anatase/rutile titanium dioxide with heterophase junction derived from materials of Institut Lavoisier-125(Ti): degradation pathway and mechanism studies10.1016/j.jcis.2020.12.042 ↗
42. Vacancy and N dopants facilitated Ti3+ sites activity in 3D Ti3−xC2Ty MXene for electrochemical nitrogen fixation10.1016/j.apcatb.2021.120482 ↗
43. Boosting the electrocatalytic HER performance of Ni3N-V2O3 via the interface coupling effect10.1016/j.apcatb.2020.119590 ↗
44. Electrochemical stability analysis of red phosphorus-based anode for lithium-ion batteries10.1016/j.electacta.2021.139149 ↗
45. Black phosphorus-based materials for energy storage and electrocatalytic applications10.1088/2515-7655/abff6b ↗
46. Building a C-P bond to unlock the reversible and fast lithium storage performance of black phosphorus in all-solid-state lithium-ion batteries
47. Understanding and calibration of charge storage mechanism in cyclic voltammetry curves10.1002/anie.202104167 ↗
48. Unlocking rapid and robust sodium storage performance of zinc-based sulfide via indium incorporation10.1021/acsnano.1c00131 ↗
49. Combination of heterostructure with oxygen vacancies in Co@CoO1−x nanosheets array for high-performance lithium sulfur batteries10.1016/j.cej.2021.128546 ↗
50. Amorphous Sn–Ni islets with high structural integrity as an anode material for lithium-ion storage10.1016/j.jallcom.2021.160416 ↗
51. Multiple Li positions inside oxygen octahedra in lithiated TiO2 anatase10.1021/ja028165q ↗
52. Performance degradation due to anodic failure mechanisms in lithium-ion batteries10.1016/j.jpowsour.2020.229145 ↗