journal article·2022-06

Effect of long-term aging on microstructure stability of a novel nickel base powder superalloy

Guohui Yang, Gaofeng Tian, Xianliang Zhang, Kewei Gao, Zhen Ji

Publisher page

Abstract

The microstructure stability, evolution law and identification of carbide and harmful phase TCP of nickel-base powder superalloy aged at 800 ℃ for 100 h —10000 h were studied by means of field emission scanning electron microscope, atomic force microscope and electron backscatter diffraction. The results show that with the increase of aging time, the grain size changed little, the grain boundary coarsened and the twin boundary Σ3 increased first and then decreased. γ` phase coarsened obviously from 500 h aging, and the coarsening rate increased first and then decreased The coarsening mechanism is mainly the combination of adjacent γ` phase by AFM analysis. Lath-like σ phase CrCo precipitated at the grain boundary first after aging for 1000 h. When the aging time was up to 2000 h, the needle-like μ phase Co 7(W, Mo) 6 was observed in the crystal. With the further increase of aging time, the total content of TCP phase at grain boundary and in crystal increased obviously. However, at 10000 h, the TCP phase in the crystal and at the grain boundary almost disappeared, mainly because the atoms in the TCP phase diffused into the γ` phase to form a new solid solution and deposited on the grain boundary, which further coarsened the grain boundary.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
2. Polycrystalline nickel-based superalloys: processing, performance, and application
3. Microstructural evolution and deformation features in gas turbine blades operated in-service10.1016/j.jallcom.2014.08.246 ↗
4. Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure10.1016/j.actamat.2012.12.004 ↗
5. Dislocation motion in a Ni-Fe-based superalloy during creep-rupture beyond 700 °C10.1016/j.matlet.2015.06.076 ↗
6. Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DT10.1016/j.actamat.2005.03.017 ↗
7. Thermal stability of primary carbides and carbonitrides in two cast Ni-base superalloys10.1016/j.matlet.2007.11.068 ↗
8. Effects of long-term thermal exposure on the microstructure and properties of a cast Ni-base superalloy10.1007/s11661-007-9381-5 ↗
9. Variations in overall-and phase-hardness of a new Ni-based superalloy during isothermal aging10.1016/j.msea.2011.03.115 ↗
10. Nucleation, growth and coarsening of γ′-precipitates in a Ni–Cr–Al-based commercial superalloy during artificial aging10.1016/j.jallcom.2008.12.068 ↗
11. Effect of thermal exposure on the stability of carbides in Ni–Cr–W based superalloy10.1016/j.msea.2010.11.088 ↗
12. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
13. TCP phase predictions in Ni-based superalloys: structure maps revisited10.1016/j.actamat.2010.10.013 ↗
14. GCP and TCP phases presented in nickel-base superalloys10.1016/j.matpr.2016.03.024 ↗
15. Development of gamma' morphology in PM rotor disc alloys during heat treatment10.7449/2004/Superalloys_2004_361_370 ↗
16. The effect of dual microstructure heat treatment on an advanced nickel-base disk alloy10.7449/2004/Superalloys_2004_323_329 ↗
17. Heat treatment of UDIMET 720Li: the effect of microstructure on properties10.1016/S0921-5093(98)00867-3 ↗
18. Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT10.1016/S0921-5093(01)01758-0 ↗
19. Ardell · Acta Met. Mater. · 1972 · 20 · 6110.1016/0001-6160(72)90114-9 ↗
20. Large-scale simulations of Ostwald ripening in elastically stressed solids: I. Development of microstructure10.1016/j.actamat.2003.11.037 ↗
21. Influence of coherency stress on microstructural evolution in model Ni-Al-Mo alloys10.1016/0956-7151(94)00337-H ↗
22. Optimal precipitate shapes in nickel-base γ–γ′ alloys10.1016/j.actamat.2011.12.008 ↗
23. The role of Ti addition on the evolution and stability of γ/γ′ microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy10.1016/j.actamat.2021.116736 ↗
24. Microstructural evolution and hardness of a heat resistant alloy during long term aging at 700 °C10.1016/j.jallcom.2018.05.263 ↗
25. The phase decomposition with related element interaction and redistribution during long term aging of 740H superalloy10.1016/j.jallcom.2018.12.211 ↗
26. The effect of long-term thermal exposures on the microstructure and properties of CMSX-10 single crystal Ni-base superalloys10.1016/j.msea.2004.04.001 ↗
27. The precipitation of topologically close-packed phases in rhenium-containing superalloys10.1016/S1359-6454(01)00265-8 ↗
28. Role and behaviour of μ phase during deformation of a nickel-based single crystal superalloy10.1016/S0921-5093(98)00766-7 ↗
29. Topologically close-packed phase precipitation in a nickel-base superalloy during thermal exposure10.1016/j.msea.2007.01.152 ↗
30. Development of HIP consolidated P/M superalloys for conventional forging to gas turbine engine components
31. Morphological instability of spherical γ′ precipitates in a nickel base superalloy10.1016/j.scriptamat.2005.03.022 ↗
32. Oxidation behavior of sputtered Ni-3Cr-20Al alloy
33. Decarburization and internal oxidation in a commercial-grade nickel10.1007/BF01675265 ↗