journal article·2022-06

Enhanced thermoelectric performance of n-type (PbSe)n(Sb2Te3) pseudo-binary via Zn filling and Ag2Se compositing

Xueqing Lian, Jicheng Wang, Baopeng Ma, Xiaolian Chao, Zupei Yang, Fudong Zhang, Di Wu

Publisher page

Abstract

Lead selenide (PbSe) is considered to be decent candidate replacing lead telluride (PbTe) as intermediate temperature (600–900 K) thermoelectric application due to its lower intrinsic lattice thermal conductivity, higher thermal stability, and larger abundance of Se than Te. To improve the thermoelectric performance of n-type PbSe, we constructed an n-type PbSe-Sb 2Se 3 pseudo-binary via alloying Sb 2Se 3 into PbSe matrix to obtain a reduced lattice thermal conductivity at a broad temperature range. Next, we introduced extra Zn into matrix to optimize the electron concentration. Last, we further added excess Ag 2 Se to modulate the lattice thermal conductivity at temperature< 523 K. Eventually, we obtained an ultralow lattice thermal conductivity of ~ 0.40 W m −1 K −1 and a large peak ZT of ~ 1.36 at 773 K in the composition of (PbSe) 40(Sb 2Se 3)Zn 0.1(Ag 2Se) 0.75; meanwhile, the average ZT between 323 and 773 K is as high as ~ 0.78, revealing a significant improvement over pristine PbSe.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. High performance thermoelectric materials: progress and their applications10.1002/aenm.201701797 ↗
2. Efficient perovskite photovoltaic-thermoelectric hybrid device10.1002/aenm.201702937 ↗
3. Recent advances in thermoelectric materials10.1016/j.pmatsci.2016.07.002 ↗
4. Conducting polymer-based flexible thermoelectric materials and devices: From mechanisms to applications10.1016/j.pmatsci.2021.100840 ↗
5. Cu2Se thermoelectrics: property, methodology, and device10.1016/j.nantod.2020.100938 ↗
6. High-performance GeTe-based thermoelectrics: from materials to devices10.1002/aenm.202000367 ↗
7. Thermoelectric generators: alternative power supply for wearable electrocardiographic systems10.1002/advs.202001362 ↗
8. Exceptionally high average power factor and thermoelectric figure of merit in n-type PbSe by the dual incorporation of Cu and Te10.1021/jacs.0c07712 ↗
9. Boosting the thermoelectric performance of PbSe through dynamic doping and hierarchical phonon scattering10.1039/C8EE00418H ↗
10. Effects of La doping induced carrier concentration regulation and band structure modification on thermoelectric properties of PbSe10.1016/j.scriptamat.2021.114360 ↗
11. Enhancement of thermoelectric performance of n-type PbSe by Cr doping with optimized carrier concentration10.1002/aenm.201401977 ↗
12. Vacancy manipulation for thermoelectric enhancements in GeTe alloys10.1021/jacs.8b09375 ↗
13. Weak electron phonon coupling and deep level impurity for high thermoelectric performance Pb1−xGaxTe10.1002/aenm.201800659 ↗
14. Improving the thermoelectric performance of p-type PbSe via synergistically enhancing the Seebeck coefficient and reducing electronic thermal conductivity10.1039/C9TA13927C ↗
15. All-Scale hierarchically structured p-type PbSe alloys with high thermoelectric performance enabled by improved band degeneracy10.1021/jacs.9b00967 ↗
16. High thermoelectric performance in PbSe-NaSbSe2 alloys from valence band convergence and low thermal conductivity10.1002/aenm.201901377 ↗
17. Tuning bands of PbSe for better thermoelectric efficiency10.1039/C3EE43438A ↗
18. Heavy doping and band engineering by potassium to improve the thermoelectric figure of merit in p-type PbTe, PbSe, and PbTe1–ySey10.1021/ja301245b ↗
19. Synergistically optimizing interdependent thermoelectric parameters of n-type PbSe through alloying CdSe10.1039/C8EE03386B ↗
20. High-performance n-type PbSe-Cu2Se thermoelectrics through conduction band engineering and phonon softening10.1021/jacs.8b10448 ↗
21. Weak electron-phonon coupling contributing to high thermoelectric performance in n-type PbSe10.1073/pnas.1111419109 ↗
22. Integrating band structure engineering with all-scale hierarchical structuring for high thermoelectric performance in PbTe system10.1002/aenm.201601450 ↗
23. Resonant level formed by tin in Bi2Te3 and the enhancement of room-temperature thermoelectric power10.1103/PhysRevB.80.233201 ↗
24. High thermoelectric performance by resonant dopant indium in nanostructured SnTe10.1073/pnas.1305735110 ↗
25. Enhancement of thermoelectric figure-of-merit by resonant states of aluminium doping in lead selenide10.1039/C1EE02465E ↗
26. Resonant levels in bulk thermoelectric semiconductors10.1039/C1EE02612G ↗
27. Enhancement of thermoelectric performance in a non-toxic CuInTe2/SnTe coated grain nanocomposite10.1039/D1TA02893F ↗
28. Nanoscale defect structures advancing high performance n-type PbSe thermoelectrics10.1016/j.ccr.2020.213437 ↗
29. Large enhancement of thermoelectric properties in n-type PbTe via dual-site point defects10.1039/C7EE01871A ↗
30. Manipulation of band structure and interstitial defects for improving thermoelectric SnTe10.1002/adfm.201803586 ↗
31. Subtle roles of Sb and S in regulating the thermoelectric properties of n-type PbTe to high performance10.1002/aenm.201700099 ↗
32. Vacancy engineering in rock-salt type (IV-VI)x(V-VI) materials for high thermoelectric performance10.1016/j.nanoen.2020.105198 ↗
33. Enhancing thermoelectric performance of p-type PbSe through suppressing electronic thermal transports10.1021/acsaem.9b01708 ↗
34. Chemical insights into PbSe-x%HgSe: High power factor and improved thermoelectric performance by alloying with discordant atoms10.1021/jacs.8b11050 ↗
35. Sung, Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
36. Soft phonon modes from off-center Ge atoms lead to ultralow thermal conductivity and superior thermoelectric performance in n-type PbSe-GeSe10.1039/C8EE01755G ↗
37. Coherent Sb/CuTe core/shell nanostructure with large strain contrast boosting the thermoelectric performance of n-type PbTe10.1002/adfm.202007340 ↗
38. Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys10.1021/acsenergylett.8b01098 ↗
39. Enhanced thermoelectric properties in the counter-doped SnTe system with strained endotaxial SrTe10.1021/jacs.5b13276 ↗
40. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe-SrTe10.1038/ncomms12167 ↗
41. Simultaneous enhancement of thermoelectric and mechanical performance for SnTe by nano SiC compositing10.1039/D0TC00572J ↗
42. Strained endotaxial PbS nanoprecipitates boosting ultrahigh thermoelectric quality factor in n-type PbTe as-cast ingots10.1002/smll.202104496 ↗
43. Eutectoid nano-precipitates inducing remarkably enhanced thermoelectric performance in (Sn1−xCdxTe)1−y(Cu2Te)y10.1039/C9TA11180H ↗
44. Spinodally decomposed PbSe-PbTe nanoparticles for high-performance thermoelectrics: enhanced phonon scattering and unusual transport behavior10.1021/acsnano.6b03696 ↗
45. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
46. Lead-free thermoelectrics: promising thermoelectric performance in p-type SnTe1−xSex system10.1039/c4ta01333f ↗
47. All-scale hierarchical thermoelectrics: MgTe in PbTe facilitates valence band convergence and suppresses bipolar thermal transport for high performance10.1039/c3ee42187b ↗
48. High thermoelectric performance in SnTe nanocomposites with all-Scale hierarchical structures10.1021/acsami.0c03349 ↗
49. Heavily doped p-type PbSe with high thermoelectric performance: an alternative for PbTe10.1002/adma.201004200 ↗
50. High-temperature thermoelectric performance of heavily doped PbSe10.1103/PhysRevB.82.035204 ↗
51. High thermoelectric performance achieved in GeTe-Bi2Te3 pseudo-binary via van der Waals gap-induced hierarchical ferroelectric domain structure10.1002/adfm.201806613 ↗
52. Boosting the thermoelectric performance of pseudo-layered Sb2Te3(GeTe)n via vacancy engineering10.1002/advs.201801514 ↗
53. Atomic stacking and van-der-Waals bonding in GeTe-Sb2Te3 superlattices10.1557/jmr.2016.334 ↗
54. Real structure and thermoelectric properties of GeTe-rich germanium antimony tellurides10.1021/cm201717z ↗
55. Synergy of valence band modulation and grain boundary engineering leading to improved thermoelectric performance in SnTe10.1021/acsaem.1c03231 ↗
56. Enhanced thermoelectric performance in GeTe-Sb2Te3 pseudo-binary via lattice symmetry regulation and microstructure stabilization
57. Contrasting role of antimony and bismuth dopants on the thermoelectric performance of lead selenide10.1038/ncomms4640 ↗
58. Metastable structures of liquid-quenched and vapour-quenched antimony films10.1007/BF00550732 ↗
59. Synergistically optimizing interdependent thermoelectric parameters of n-type PbSe through introducing a small amount of Zn
60. Understanding nanostructuring processes in thermoelectrics and their effects on lattice thermal conductivity10.1002/adma.201505638 ↗
61. Study of the thermoelectric properties of lead selenide doped with boron, gallium, indium, or thallium10.1021/ja307910u ↗
62. Rationally optimized carrier effective mass and carrier density leads to high average ZT value in n-type PbSe10.1039/D1TA07039H ↗