journal article·2022-05

Rapid growth of Cu2−xSe thin films on brass with mixed acid solutions stabilized by using sodium silicate as a sealant

Dawei Guan, Jinwei Wang, Xiaojing Lv

Publisher page

Abstract

Composite Cu 2−x Se thin films can be rapidly prepared on brass by liquid chemical deposition in 1 min. With the addition of acetic acid in the oxidizing solution containing SeO 2/H 2SO 4/ H 2O 2 , the sizes of the selenide particles become smaller and thus much smoother films are obtained, while the films become thinner and denser as seen from their scanning electron microscopy and EDS results. X-ray diffraction and XPS results reveal that copper acetate is spontaneously formed with the acetate acid addition, and the existence of copper acetate hinders the growth of copper selenides, leading to the decrease in film thickness; during their mutual deposition, copper acetate probably fills the spaces among selenide particles, and thus improves the compactness and decrease the roughness of the composite film. The miniaturization of the selenide particles with the acetate acid addition results in a great improvement in both the hardness and wear resistance of the composite films. When the composite films are sealed by sodium silicate, a successive interlayer is formed on their outer surfaces that result in the further improvement in their corrosive resistance as reflected by the electrochemical test and thermal humidity test.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Optical properties of CuSe thin films-band gap determination10.2298/SOS1702167P ↗
2. Copper selenide films via screen printing and sintering technique for semiconductor device applications: synthesis and characterization
3. Preparation of Cu2Se thin films by vacuum evaporation and hot-pressing10.1016/j.vacuum.2020.109947 ↗
4. The influence of heat treatments on the thermoelectric properties of copper selenide thin films prepared by ion beam sputtering deposition10.1016/j.jallcom.2015.10.276 ↗
5. Rapid hydrothermal synthesis of highly crystalline transition metal (Mn & Fe) doped CuSe nanostructures: applications in wastewater treatment and room temperature gas sensing
6. Influence of different deposition potential on the structural and optical properties of copper selenide nanowires10.1016/j.spmi.2016.04.036 ↗
7. Advantageous mechanochemical synthesis of copper (I) selenide semiconductor, characterization, and properties
8. Synthesis and characterisation of Cu2Se thin films doped with divalent cation (Cd2+) by the chemical bath deposition method10.1080/01411594.2021.1945058 ↗
9. Efficiently two-stage synthesis and characterization of CuSe/Polypyrrole composite thin films10.1016/j.jallcom.2017.08.095 ↗
10. Graphene oxide nanocomposite with CuSe and photocatalytic removal of methyl green dye under visible light irradiation10.1016/j.diamond.2021.108254 ↗
11. Highly efficient near-infrared photothermal antibacterial membrane with incorporated biogenic CuSe nanoparticles10.1016/j.cej.2020.126711 ↗
12. Low temperature electrical conductivity and seebeck coefficient of nanostructured CuSe thin films with Ga addition10.1016/j.vacuum.2016.04.011 ↗
13. Metal ions mediated morphology and phase transformation of chalcogenide semiconductor: from CuClSe2 microribbon to CuSe nanosheet10.1021/acs.langmuir.5b00373 ↗
14. Influence of ZnSe capping of CdSe layers in the growth mode of ZnCdMgSe/CdSe/ZnCdMgSe heterostructures10.1116/1.4953350 ↗
15. Layer-by-layer assembly of two-dimensional colloidal Cu2Se nanoplates and their layer-dependent conductivity10.1021/acs.chemmater.6b01246 ↗
16. Synergistic corrosion protection for galvanized steel by phosphating and sodium silicate post-sealing10.1016/j.surfcoat.2007.08.001 ↗
17. Phosphate-silicate composite coating formed on AM60 magnesium alloy10.1179/026708409X12450792800114 ↗
18. Effect of phosphating and post-sealing on the corrosion resistance of electro-galvanized steel10.20964/2017.03.39 ↗
19. Role of surface area, primary particle size, and crystal phase on titanium dioxide nanoparticle dispersion properties
20. Recent developments on fractal-based approaches to nanofluids and nanoparticle aggregation10.1016/j.ijheatmasstransfer.2016.10.011 ↗
21. Formation thermodynamic parameters of nano copper (II) acetate monohydrate with 4, 6-diacetylresorcinol in mixed solvents10.1016/j.matchemphys.2020.123370 ↗
22. Study of the effects of Ni+ ion implantation on morphology, structure, hardness, and electrical conductivity of brass10.1002/sia.6949 ↗
23. Study on thermal decomposition of copper (II) acetate monohydrate in air10.1007/s10973-011-1454-4 ↗
24. Tailoring the surface characteristics of CuSe thin films by adjusting the compositional ratio10.1002/pssa.202170043 ↗
25. A novel CuSe-Cu1.8Se heterostructure with hexahedral structure cathode material for aluminum batteries10.1016/j.cej.2021.131899 ↗
26. Preparation and characterization of film of poly vinyl acetate ethylene copolymer emulsion10.1016/j.apsusc.2013.03.071 ↗
27. The effect of the Cu+/Cu2+ ratio on the redox reactions by nanoflower CuNiOS catalysts10.1016/j.ces.2018.02.016 ↗
28. Doping of Sn transition metal in CuSe2 thin films and its effect on structural evolvement and opto-electrical properties10.1007/s00339-016-0249-7 ↗
29. Morphological evolution of bilayer-structured copper oxide from ribbon-like-structured copper acetate hydroxide with varying growth temperatures10.1016/j.matlet.2020.127424 ↗
30. Effects of surfactant and reaction time on the formation and photocatalytic performance of Cu2S thin films grown in situ on Cu foil by hydrothermal method10.1016/j.jallcom.2016.05.244 ↗
31. Ultrahard nanotwinned cubic boron nitride10.1038/nature11728 ↗
32. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
33. A high-efficiency corrosion inhibitor of N-doped citric acid-based carbon dots for mild steel in hydrochloric acid environment10.1016/j.jhazmat.2019.121019 ↗
34. Rapid sealing of an alumina nanoporous network grown by anodizing and dye-filled10.1016/j.surfcoat.2019.03.004 ↗
35. Preparation and characterization of anodic films on AZ31B Mg alloy formed in the silicate electrolytes with ethylene glycol oligomers as additives10.1016/j.apsusc.2012.05.135 ↗
36. Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys10.1007/s11998-010-9258-1 ↗
37. The corrosion inhibition effect of sodium silicate and Triton X-100 on 2024-T3 aluminum alloy in NaOH medium: Experimental and theoretical research10.1016/j.colsurfa.2020.125723 ↗
38. A method to select the optimal equivalent electrical circuit applied to study corrosion system of composite coating on magnesium alloy10.1016/j.physleta.2020.126452 ↗
39. A performance comparison of protective silicate-coated lead and non-coated lead electrodes in various kind electrolytes of gel valve-regulated lead-acid battery10.1007/s11581-018-2551-1 ↗
40. Enhancing the performance of paper-based electrochemical impedance spectroscopy nanobiosensors: an experimental approach10.1016/j.bios.2020.112672 ↗
41. Electrochemical behavior of nano-iron oxide modified alkyd based waterborne coatings10.1016/j.matchemphys.2009.07.010 ↗