journal article·2020-01

Evaluation of structure and magnetic properties of maraging steel powder feedstock for additive manufacturing of magnetic components

G.V. Thotakura, R. Goswami, T.V. Jayaraman

Publisher page

Abstract

Abstract We investigated the structure as well as the magnetic properties of a commercial maraging steel powder feedstock—EOS MS1—and elucidated the stability of supersaturated martensite phase upon thermal-treatment. The investigation unfolds the potential reusability/recyclability of the powder feedstock, which is essential from an economic as well as an environmental perspective in the manufacturing of magnetic components. The as-supplied powder feedstock predominantly constituted martensite (lattice parameter ∼0.2881 nm). The coercivity (HCI), remanence (MR), and magnetic saturation (MS) of the powder feedstock were estimated as 3.03 ± 0.12 kA/m, 1.4 ± 0.1 A m2/kg, and 176.0 ± 2.0 Am2/kg, respectively. The supersaturated martensite phase was stable during thermal treatment. The MS, MR, and HCI of the thermally-treated powders, on an average, were ∼1% more, ∼0.8 times less, and ∼0.9 times less, respectively, than the as-supplied powder feedstock: thermal-treatment marginally enhanced the soft-magnetic behavior. The similarities in the structure and the magnetic properties between the as-supplied and thermally-treated powders suggest that the powder feedstock is reusable/recyclable in the manufacturing of magnetic components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Invited review article: metal-additive manufacturing—modeling strategies for application-optimized designs
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Metal fabrication by additive manufacturing using laser and electron beam technologies10.1016/S1005-0302(12)60016-4 ↗
4. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel
5. High-stiffness and strength porous maraging steel via topology optimization and selective laser melting
6. Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments
7. Comparison of maraging steel micro- and nanostructure produced conventionally and by laser additive manufacturing
8. Selective laser melting of tungsten carbide reinforced maraging steel composite
9. Prediction of lack-of-fusion porosity for powder bed fusion
10. Evaluation of metal powder for additive manufacturing of maraging steel
11. Searching for favorable powder bed fusion settings in sintering of maraging steel MS1
12. Tension-compression asymmetry of additively manufactured maraging steel10.1016/j.jmapro.2018.08.015 ↗
13. Numerical tools to investigate mechanical and fatigue properties of additively manufactured MS1-H13 hybrid steels
14. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
15. Determination of the EOS maraging steel MS1 material resistance at low temperatures
16. Rohrbach · 1990 · 793
17. Properties of maraging steel 300 produced by powder metallurgy10.1179/pom.1974.17.33.004 ↗
18. The physical metallurgy of maraging steel10.1179/imr.1968.13.1.115 ↗
19. Microstructural changes produced by hot forging in a C300 maraging steel10.1016/j.msea.2015.12.084 ↗
20. Metal Powder EOS MaragingSteel MS1 · 2011
21. Metal Powder EOS MaragingSteel MS1 (Lot# G191801) · 2018
22. Profile shape functions in rietveld refinements10.1107/S002188988201231X ↗
23. Suryanarayana · 1998 · 153
24. Cullity · 2001 · 376
25. Jeffrey · 1971
26. De Graef · 2012
27. Williams · 2009
28. Krishnan · 2016
29. Cullity · 2009
30. Chikazumi · 1964
31. German · 2005
32. Crystallographic features of microstructures in maraging steel fabricated by selective laser melting
33. Microstructural and mechanical properties of selective laser melted 18Ni-300 steel
34. Microstructural control of maraging steel C30010.1179/026708309X12506933873503 ↗
35. Estimation of cooling rates during close-coupled gas-atomization using secondary dendrite arm spacing measurement10.1007/s11663-013-9856-2 ↗
36. Gas-atomized Al 6061 powder: phase identification and evolution during thermal treatment
37. Development and applications of ultrafine aluminum powders10.1016/j.msea.2003.10.160 ↗
38. Flemings · 1974
39. Kittel · 2004
40. Influence of temperature and aging time on hardness and magnetic properties of the maraging steel grade 30010.1007/s10853-006-1317-8 ↗
41. Bozorth · 1993
42. Temperature dependence of magnetic anisotropy constants in iron chalcogenide Fe3Se4: excellent agreement with theories10.1063/1.4759352 ↗
43. Lattice changes in the martensitic phase due to aging in 18 wt.% nickel maraging steel grade 35010.1007/BF01139144 ↗