journal article·2018-10

Characterization of carbon-coated LiFe0.3Mn0.7PO4 particles produced using a colloidal method for lithium batteries

Sana Dhaybi, Benoît Marsan

Publisher page

Abstract

Abstract A convenient colloidal process for the preparation of LiFe0.3Mn0.7PO4/C nanocomposite cathode material for lithium batteries is reported. The process involves the use of lithium dihydrogen phosphate (LiH2PO4), ferrous chloride (FeCl2) and manganese chloride (MnCl2) as starting materials, with anhydrous N-methylimidazole (NMI) as the solvent and carbon source, followed by a 3 h annealing step at 650 °C. Carbonization of the molten salt NMIH+Cl− derived from NMI resulted in 3.0 wt% carbon content in the LiFe0.3Mn0.7PO4/C with 3–6 nm thick carbon coating. The material was characterized by thermogravimetric and differential thermal analysis, differential scanning calorimetry, powder X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, atomic absorption spectroscopy, Raman spectroscopy, four-point probe method, cyclic voltammetry and galvanostatic cycling experiments in coin cells. SEM analysis of the LiFe0.3Mn0.7PO4/C material revealed non-spherical agglomerates with average width and length of 50–70 nm and 120–150 nm, respectively. The electronic conductivity of carbon-coated LiFe0.3Mn0.7PO4 was found to be 9.7 × 10−2 S cm−1 at room temperature, and the discharge capacity reached 137 mAh g−1 measured at C/20 when the cell was cycled between 2.2 V and 4.2 V vs. Li+/Li, and 124 mAh g−1 at C/10 for the first cycle. The capacity dropped to 122 mAh g−1 at C/10 after the first 25 cycles and then stayed constant at 121 mAh g−1 until the 100th discharge cycle, making this cell to exhibit excellent cycling stability with only a 2.4% decrease.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Phospho-olivines as positive electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
2. Effect of structure on the Fe3 +/Fe2+Redox couple in iron phosphates10.1149/1.1837649 ↗
3. Electronically conductive phospho-olivines as lithium storage electrodes10.1038/nmat732 ↗
4. Optimized LiFePO4 for lithium battery cathodes10.1149/1.1348257 ↗
5. Olivine-type cathodes: achievements and problems10.1016/S0378-7753(03)00239-8 ↗
6. Reaction mechanism of the olivine-type Lix (Mn0.6Fe0.4) PO4 ( 0 ⩽ x ⩽ 1 )10.1149/1.1375167 ↗
7. Pulsed laser deposition and electrochemical characterization of LiFePO4–Ag composite thin films10.1002/adfm.200700390 ↗
8. Toward understanding of electrical limitations (electronic, ionic) in LiMPO4(M = Fe , Mn) electrode materials10.1149/1.1884787 ↗
9. Comparative kinetic study of olivine Lix MPO4 ( M = Fe , Mn)10.1149/1.1773731 ↗
10. Studies on the kinetic properties of Mn-Rich LiFexMn1-xPO4 olivine phases as cathode materials for Li-Ion rechargeable batteries10.1149/2.002310jes ↗
11. Structural studies of nanosized LiFe0.5Mn0.5PO4 under cycling by in situ synchrotron diffraction10.1016/j.ssi.2012.01.003 ↗
12. Preparation of nano-structured LiFexMn1−xPO4 (x = 0, 0.2, 0.4) by reflux method and Research on the influences of Fe(II) substitution10.1016/S1005-0302(12)60137-6 ↗
13. Excellent electrochemical performance of LiFe0.4Mn0.6PO4 microspheres produced using a double carbon coating process10.1039/C4TA03994G ↗
14. Advances of aqueous rechargeable lithium-ion battery: a review10.1016/j.jpowsour.2014.10.009 ↗
15. A surfactant-assisted synthesis route for scalable preparation of high performance of LiFe0.15Mn0.85PO4/C cathode using bimetallic precursor10.1016/j.jpowsour.2014.04.049 ↗
16. LiFe0.5Mn0.5PO4/C prepared using a novel colloidal route as a cathode material for lithium batteries10.1016/j.jallcom.2017.12.064 ↗
17. A new low-cost and simple colloidal route for preparing carbon-coated LiFePO4 for lithium batteries10.1016/j.est.2018.05.009 ↗
18. Manipulation of adipic acid application on the electrochemical properties of LiFePO4 at high rate performance10.1016/j.jallcom.2010.10.009 ↗
19. Streltsov · Acta Crystallogr. B. · 1993 · 49 · 14710.1107/S0108768192004701 ↗
20. Thermal properties of fully delithiated olivines10.1016/j.jpowsour.2014.01.046 ↗
21. Characterisation of olivine-type LiMnxFe1−xPO4 cathode materials10.1016/j.jallcom.2006.01.038 ↗
22. Surfactant based sol–gel approach to nanostructured LiFePO4 for high rate Li-ion batteries10.1016/j.jpowsour.2006.09.082 ↗
23. Electrochem. Effect of surface carbon structure on the electrochemical performance of LiFePO410.1149/1.1601372 ↗
24. Electrochem. Electrochemical performance of sol-gel synthesized LiFePO4 in lithium batteries
25. LiFe0.8Mn0.2PO4/C cathode material with high energy density for lithium-ion batteries10.1016/j.jallcom.2012.04.008 ↗
26. LiFexMn1−xPO4: a cathode for lithium-ion batteries10.1016/j.jpowsour.2010.12.045 ↗