journal article·2017-04

Growth and characterization of CIGS thin films by plasma-assisted and thermal-assisted Se vapor selenization process

Yunxiang Huang, Yong Tang, Wei Yuan, Xiaoqing Zhang, Wanyu Wen, Qinghui Wang

Publisher page

Abstract

Abstract In this work, we investigate the material growth of the electrodeposited Cu/In/Ga stacked layers selenized by a plasma-assisted Se vapor selenization (PASVS) process at various substrate heating temperatures. For comparison, a merely thermal-assisted Se vapor selenization (TASVS) process is also tested. The PASVS process can help enhance the decomposition of Cu-In-Ga mixed phase and also the formation of Cu-Se and In-Se binary phases when the sample is selenized at 150 °C. However, the use of PASVS process aggravates the element indium loss at the same temperature. Results also indicate that the PASVS process helps to activate the early formation of Ga-Se phase during selenization at 250 °C. The PASVS process generates a porous surface structure with certain CuGaSe2 phase near the surface region at 350 °C. With the increase of selenization temperature, the film selenized by the PASVS process is prone to a grain structure, while it is a polygonal structure in the case of TASVS. The PASVS process is more able to yield a pure CIGS phase with moderate Ga incorporation at a temperature of 550 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Toward low-cost large-area CIGS thin film: compositional and structural variations in sequentially electrodeposited CIGS thin films10.1016/j.solener.2015.12.007 ↗
3. Toward high efficiency and panel size 30 × 40 cm2 Cu(In,Ga)Se2 solar cell: investigation of modified stacking sequences of metallic precursors and pre-annealing process without Se vapor at low temperature10.1016/j.nanoen.2014.07.018 ↗
4. CIGS-based solar cells prepared from electrodeposited precursor films10.1016/j.solmat.2011.10.026 ↗
5. CIGS-based solar cells prepared from electrodeposited stacked Cu/In/Ga layers10.1016/j.solmat.2013.01.028 ↗
6. Formation mechanisms of Cu(In,Ga)Se2 solar cells prepared from electrodeposited precursors10.1016/j.tsf.2012.11.106 ↗
7. Cu(In, Ga)Se2 thin films prepared from stacked precursors by post-selenization process10.1007/s10854-014-1811-8 ↗
8. Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells10.1016/S0022-3697(03)00127-6 ↗
9. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
10. Two-step Selenization of Cu-In-Ga precursors for CIGS thin-film solar cells by using a Se cracker10.3938/jkps.60.1753 ↗
11. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu(In,Ga)(Se,S)2 thin films10.1063/1.4704390 ↗
12. CIGS formation by high temperature selenization of metal precursors in H2Se atmosphere10.1016/j.sse.2012.05.055 ↗
13. Large grain Cu(In,Ga)Se2 thin film growth using a Se-radical beam source10.1016/j.solmat.2008.09.043 ↗
14. 30× 40 cm2 flexible Cu(In,Ga)Se2 solar panel by low temperature plasma enhanced selenization process10.1016/j.nanoen.2016.01.023 ↗
15. Plasma-assisted co-evaporation of S and Se for wide band gap chalcopyrite photovoltaics
16. Phases, morphology, and diffusion in CuInxGa1-xSe2 thin films10.1063/1.366122 ↗
17. Reaction kinetics of CuGaSe2 formation from a GaSe/CuSe bilayer precursor film10.1016/j.jcrysgro.2008.01.034 ↗
18. Effect of selenization pressure on CuInSe2 thin films selenized using co-sputtered Cu-In precursors10.1016/S0927-0248(99)00157-9 ↗
19. Argon ion beam and electron beam-induced damage in Cu(In,Ga)Se2 thin films10.1016/j.tsf.2006.11.021 ↗
20. Crystallization phase transition in the precursors of CIGS films by Ar-ion plasma etching process10.1016/j.vacuum.2013.04.012 ↗
21. Influence of selenization techniques on the reaction kinetics of chalcopyrite thin films10.1016/S0040-6090(01)00797-0 ↗
22. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
23. Heteroepitaxy of layered compound InSe and InSe/GaSe onto GaAs substrates10.1143/JJAP.37.4092 ↗
24. Micro-Raman spectroscopy in polycrystalline CuInSe2 formation10.1007/BF00332168 ↗
25. Characterization of Cu(In,Ga)Se2 films by Raman scattering10.1016/S0254-0584(01)00345-5 ↗
26. Raman spectra of the ordered vacancy compounds CuIn3Se5 and CuGa3Se510.1063/1.121893 ↗
27. Impact of electronic defects on the Raman spectra from electrodeposited Cu(In,Ga)Se2 solar cells: application for non-destructive defect assessment10.1063/1.4793418 ↗
28. Raman scattering in GaSe10.1139/p75-203 ↗
29. Raman investigation of InSe and GaSe single-crystals oxidation10.1088/0268-1242/17/2/101 ↗
30. Preparation and characterization of Cu(In,Ga)(Se,S)2 films without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3 targets10.1016/j.apsusc.2010.12.036 ↗
31. Crystalline ordered states of CuIn1-xGaxSe2 (x= 0, 0.3, and 1.0) thin-films on different substrates investigated by Raman scattering spectroscopy10.1016/j.matchemphys.2012.03.107 ↗
32. Raman scattering analysis of electrodeposited Cu(In,Ga)Se2 solar cells: impact of ordered vacancy compounds on cell efficiency10.1063/1.4890970 ↗
33. Fabrication of CuIn1-xGaxSe2 thin film solar cells by sputtering and selenization process10.1016/S0040-6090(03)00350-X ↗
34. The surface tension of liquid gallium10.1016/0022-0248(85)90367-7 ↗
35. Toward low-cost large-area CIGS thin film II: out-of-plane compositional variations of sequentially electrodeposited Cu/In/Cu/Ga/Cu stacked layers selenized in rapid thermal process10.1016/j.solener.2016.01.040 ↗